Fly Fly Hobby F-4 Phantom-II User manual

Model No : FF-D007
F-4 Phantom-II
Scale EDF Radio Control model airplane
Wingspan : 1010mm
UNDER SAFETY PRECAUTIONS
This radio control is not a toy!
- Always keep this instruction manual ready on hand for quick reference.
- Assemble this kit only places out of children reach.
- First-time builders of EDF model should seek the advice of experienced modellers before
beginning assembly and if they do not fully understand any parts of the construction.
- Taking out liability insurance is recommended.
- You are responsible for this model’s assembly and safe operation.
2 pcs required
1. Signal cable
(Elevator)
2. Silicone motor cable (No. 14AWG)
1 pc required
You need to purchase the following accessories separately to complete the model.
3 pcs required
800mm
1 pc required
4. 60A Electric Speed Control (ESC) w/BEC
60A
w/ BEC
1 pc required
5. B36 Brushless Motor, 1500-1600kv,
Outruuner or Inrunner, Shaft dia 5mm
3 pcs required
6. Micro servo, torque >1.8kg
3. Li-Po Battery, 5-6 cells, 3600mAh, 20C
C
500mm
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
FLYFLY
HOBBY
All manuals and user guides at all-guides.com
all-guides.com

Elevator
Fuselage front
Fuselage main
1
Plywood set, 3mm thickness
Nylon horn
Magic tape
4 x 50mm screw
Decal set
1.5 x 160 wire
5
4 x 35mm screw
16
93 x4 mm set screw
3
2
1
42 x 7mm TP screw
33 x4 mm screw
3 x 10 mm screw
7 4mm blind nut
1
3
3
2
2
2
1
3
1
2
1
Qty Description Description
Parts Parts Qty
Undercarriage
housing
Canopy lock
Elevator support
3mm
Main component
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
Nose cone
All manuals and user guides at all-guides.com

FLYFLY HOBBY
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
ESC
5-6 cells
Li-po
Magic tape
Align the mark to the bottom
All manuals and user guides at all-guides.com

FLYFLY HOBBY
3
(a) Never operate the unit with loose items of clothing or equipment near to the intake area.
(b) Never operate the unit held in your hands as personal injury, or damage to the unit may occur.
(c) Always do a thorough inspection of the unit prior to any operational use.
(d) Always think safety first.
(e) Secure all the screws. If any screws loose while rotating and the serious injury may occur.
Caution : As proper use of the fan unit is out of the influence of the manufacturer, the operation of the fan unit is on
owners risk!
This is not a toy! The unit should only be operated by childs of 12 years and supervised by an adult.
Ducted fan unit
4
Connect to ESC
Connect to receiver
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
2 pcs required
1. Signal cable
(Elevator)
800mm
2. Silicone motor cable (No. 14AWG)
3 pcs required
500mm
Warning : Always check the motor and fan
unit assembly every 5 flights at
least. The screws may loose by
the vibration in flight.
All manuals and user guides at all-guides.com

FLYFLY HOBBY
5
6
12 x 7 x 3 plywood
21 x 7 x 3 plywood
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
Elevator
All manuals and user guides at all-guides.com

FLYFLY HOBBY
7
8Canopy
Double side tape
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
All manuals and user guides at all-guides.com
all-guides.com

FLYFLY HOBBY
9
10 Wing
Undercarriage
Main gear assembly Nose gear assembly
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
110 x 37 x 3
All manuals and user guides at all-guides.com

FLYFLY HOBBY
11 Vertical fin
12 Elevator
3mm collar
3mm set screw
Make 5mm hole
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
All manuals and user guides at all-guides.com

FLYFLY HOBBY
13 Exhaust cone
14
Note : Epoxy the shadow portion only.
180mm
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
2mm Nut
3 x 4 screw
Linkage Stopper
1.5 x160 mm rod
All manuals and user guides at all-guides.com

FLYFLY HOBBY
15 Adjustment
16
160mm 145mm
AA’
B
B’
A = A’
B = B’
Decal
TO
CAUTION
RELEASE
PUSH
IFCANOPYDOESNOT
CLOSEINSTANTLYPUSH
IOPENBUTTOWBEFORE
ATTEMPTINGTOCLOSE AGAIN
PUSH
TO RELEASE
FWDCANOPY
MANUALRELEASE
AFTCANOPY
MANUALRELEASE
JET
INTAKE
DANGER
JETTISON
CANOPIES
CANOPY
JETTISON
DOOR
TO
HANDLE INSIDE
PUSH
OPEN
PULL
HANDLE
CAUTION
BEFORE OPERATING CONTROLS
REFERTO MINIMIUM STRUCTURAL
ACCESSDOOR REQUIREMENTS
SECT.IMAINTENANCEMANUAL
TOPREVENTDAMAGE TO AIRCRAFT
TOPREVENTEQUTPMENT DAMAGE
REFER TO MAINTENANCE MANUAL
FORRADONEOPENING PROCEDURE
CAUTION
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
All manuals and user guides at all-guides.com