Fly Fly Hobby DG-808S User manual

Model No : FF-B013 / 015-E
Scale Radio Control model airplane
Wingspan : 4000mm
UNDER SAFETY PRECAUTIONS
This radio control is not a toy!
- Always keep this instruction manual ready on hand for quick reference.
- Assemble this kit only places out of children reach.
- First-time builders of large scale model should seek the advice of experienced modellers
before beginning assembly and if they do not fully understand any parts of the construction.
- Taking out liability insurance is recommended.
- You are responsible for this model’s assembly and safe operation.
1 pc required
1. Signal cable
(Elevator)
You need to purchase the following accessories separately to complete the model.
4 pcs required
1500mm
5 pcs required
3. Micro servo, torque >1.8kg
1 pc required
4. Standard servo, torque >3.0kg
CCopyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
FLYFLY
HOBBY
2. Signal cable
(Aileron, flap)
1000mm

Main component
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
rubber band 2
1
10
10 x 10 x7 mm
hard wood
5
30 x 10 mm
plastic sheet
7
Horn
1
1.5 x 80 mm wire
1
3mm plywood
2
Hook
30
TP Screw
1.8 x 9 mm
7
Linkage stopper
2
4 x 20 mm screw
2
3 x 40mm
Wire
2
1 x 1200 mm wire
4
1.5 x 80 mm wire
4
3mm fiberglass joiner
Motor mount for
model no. FF-B015E
Hinges 3
10 x 500 mm
carbon rod

FLYFLY HOBBY
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
AB
1.8 x 9 mm TP screw
Wing
4 pcs required
1. Signal cable
(Aileron, flap)
1000mm
Tape to secure the tips
Fiberglass joiner
AB
Wing
Fix with tape
Fix with tape
2 mm Nut
3 x 4 mm
Linkage Stopper
1.5 x 80mm
Double side tape
Double side tape

FLYFLY HOBBY
3Fuselage
4
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
10 x 500mm Carbon rod
3 x 40mm Wire
2 turns:big rubber band
AB
3mm wood
3mm wood
Rubber band
Double side tape
Rubber band

FLYFLY HOBBY
5
6
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
Elevator
1.8 x 9mm TP screw
4 x 20 mm screw
Cut away covering film.
Down side
C C'
C =C'
If the tail is not right angle
to the fin, apply tape to one
side to achieve the right
alignment.
Elevator
1 pc required
1. Signal cable
(Elevator)
1500mm
AB
10 x 10 x 7mm hard wood
30 x 10mm plastic
2 mm Nut
3 x 4 mm
Linkage Stopper
1 x 80 mm

FLYFLY HOBBY
7
8Adjustment
Adjustment
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
AA'
BB'
A = A’A = A’
B = B’
C = C’
C C’
CG 60mm
ELEVATOR
AILERON / FLAP
25mm
25mm
20mm
20mm
RUDDER
30mm
30mm

FLYFLY HOBBY
Motor assembly
Copyright 2009 Fly Fly Hobby Designed and Manufactured by : Fly Fly Hobby Mfg. http://www.flyflyhobby.com
For model no. FF-B015E only Outrunner 1500kv motor
(Purchase separately)
Recommended propeller size 9 x 6
The maximum length of the blade
is 9” (230mm).
Propeller need to purchase separately
Motor assembly