foc.us ST-IVB User manual

ST-IVB User Manual
P/N 20110308-1

1
ST-IV series alarm panel 1PC
Wireless detector 1PC
Wireless door sensor 1PC
Wireless remote 1PC
Adaptor 1PC
Book manual 1PC
Resistor 10K 8PCS
Screws and Plastic dowels 6PCS

1pc of wirele
-ss doorbell

29. To set built-in siren enable or disable when presspanic button
on remote or panel keypad , please refer to adaptor 5.8.
30. Require user password before enter remote control.
31. Gsm alarm function:GSM alarm report to user and alarm report
to CMS in CID.

1
Disarm

LINE
Z33Z33
Z34Z34
Z35Z35
Z36Z36
Z37Z37
Z38Z38 Z39Z39
Z40Z40
AUXAUX
BELLBELL
+
TELL
DC12V 500MA orhigher(when without GSMmodule)
DC 12V, 2Aor higher (whenthe panel withGSM module)
10K
10K
10K
10K
Here only introduce the zone #33,34,39,40.The other zone
connect the same way.

“Opration fauilure,zone trouble”.
0(zone open loop:zone #+0;zone
close loop:zone #+5),under this status pls do not arm
system.

9
GSM function:ineffective

GSM using
0
5
+8

Under panel stanby status press disarm button for 3s for emergency help.
Indication LED
Arm: Normal onunder away arm,blink under homearm.
Disarm: Light on under disarm status, light off under disarm status.
12V : Light on when AC power connect, light off when AC power off.
Alarm: Blink when alarming.

1
2
3
4
5
6
7
0

2
3
4
X X X X
0