FONESTAR WA-2152B User manual

WA-2152B
BLUETOOTH AMPLIFIER
INSTRUCTION MANUAL
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Pá ina 1

We take this opportunity to thank you for buying this product.
We recommend you read the instruction manual before switching on the machine and follow the instructions
that are given. Keep the manual for future reference.
SECURITY AND THE ENVIRONMENT
ELECTRICAL SECURITY
Check that the current in the mains connection where the machine is to be installed corresponds to the
power supply of the machine.
To avoid damaging the equipment, electrical shocks, fire or physical injury when you connect or disconnect
the equipment from the power supply, pull the plug firmly out of the mains socket holding the plug, never the
cable.
Always do this with dry hands.
Keep the power supply cable far from sources of heat. Do not put heavy objects on top of it or change it.
Clean dust and dirt off the power supply cable regularly.
Do not open the machine; you could get an electric shock.
CAUTION
While installing the machine, make sure it is switched off and unplugged.
Do not open the machine. Touching the internal parts is dangerous and you could receive an electric shock.
The machine must not be splashed or dripped on. Never place recipients with liquid inside on the machine.
Do not place anything inside the machine.
LOCATION
Place the equipment on a horizontal surface with enough space around it to allow ventilation.
Avoid direct sunlight, heat sources and excessive dust.
Do not place the machine near magnetic fields or static electricity.
Do not use surfaces which vibrate or receive impact.
Do not pile machines on top of one another.
VENTILATION
Never block or cover the ventilation slits on the machine.
Do not expose it to direct sunlight or place it near sources of heat.
PERIODS OF INACTIVITY
When the machine is not going to be used for a long period of time, disconnect it from the mains.
If you are using an adapter, take into account that it will continue using electricity even if the machine is
switched off. If it is not going to be used for a long period of time, disconnect it from the mains.
THE ENVIRONMENT
To save energy, switch the machine off when you are not going to use it for a long time. The machine could
contain substances that are harmful to the environment or human health. To minimize the effect of these
substances the machine must be correctly managed and recycled when you decide to dispose of it.
When you dispose of it remember: it cannot be thrown into a conventional rubbish bin.
If it contains or uses batteries, these must be disposed of separately.
The machine (without batteries) must be disposed of correctly. Put it in a container specially intended for the
collection of electronic and electrical appliances, at the dump or hand it over to the dealer when you purchase
similar equipment, so that the dealer can dispose of it correctly (at no added cost).
-2-
EN
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Pá ina 2

SIGNIFICANCE OF THE SYMBOLS ON THE MACHINE*
The symbol formed by the expression “Class 1 laser product” written in a rectangle
indicates that visible or invisible laser radiation could be produced. Avoid direct exposure
to the laser.
The symbol formed by a ray of lightening inside a triangle shows that the machine has
connection terminals or a circuit with areas with a current which could cause an electric
shock, even in normal working conditions.
The symbol formed by an exclamation mark in a triangle shows that the instruction manual
must be referred to for information on how the machine works and its use.
The symbol formed by one square inside another square shows that the machine has
double electrical insulation.
The European Community symbol shows that the machine complies with the current
European Union legislation, as well as its transposition to local legislation.
The symbol of a rubbish bin crossed out and over a horizontal line shows that when the
product is disposed of it must be done properly, placing it in a special selective electronic
and electrical equipment container or through a dealer when purchasing a similar product,
at no additional cost. It also shows that the machine was put on the market after 13th
August 2005 (European Community Directive 2002/96/CE of Electrical and Electronic
recycling, and its Spanish equivalent R.D.208/2005).
In accordance with what is set out in the aforementioned decree, FONESTAR is registered
in the RAEE (Registro de Aparatos Eléctricos y Electrónicos) in a special section REI
(Registro de establecimientos Industriales), with the entry number 001851.
The symbol RoHS (Restriction of Hazardous Substances) shows that the product has been
designed and manufactured restricting the use of certain dangerous material(Directive
2009/95/CE on the restriction of certain dangerous substances in electrical and electronic
appliances, and its transferal to the Spanish regulations, R.D. 208/2005).
*It is possible that some of these symbols do not appear on the machine.
EXEMPTION OF LIABILITY
The characteristics of the equipment and the content of the manual can change without forewarning.
FONESTA , S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the
information supplied in this instruction manual, and specifically disclaims any implied liability for marketability
or fitness for any other use.
All rights reserved by FONESTA , S.A
-3-
EN
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Pá ina 3

DESC IPTION
The model WA-2152B is a stereo amplifier with bluetooth 15 + 15 W RMS at 4 Ω with great sound quality
and optimum performance. Specially suitable for domestic use.
It incorporates a bluetooth receiver to play music received from a mobile telephone.
It has several inputs that make it easier to connect different audio sources (AUX on the front panel, MIC and
INPUT on the rear panel).
Main speaker output, spring terminals.
CONT OLS AND FUNCTIONS
1.- POWE : power switch to switch the device on/off.
2.- BT: LED bluetooth connection indicator.
3.- BLUETOOTH/AUX: operating mode selector: bluetooth or aux input.
4.- VOL: output signal general volume control.
5.- AUX: stereo aux signal input, 3.5 mm connector.
6.- T EBLE: reinforces or attenuates treble frequencies.
7.- BASS: reinforces or attenuates bass frequencies.
8.- INPUT: aux input, 2 x RCA connectors.
9.- BT ANTENNA: bluetooth antenna.
10.- MIC: dynamic microphone signal input, 6.3 mm jack connector.
11.- SPEAKE OUTPUT: speaker terminals. To connect speakers in low impedance, spring terminals.
12.- Power supply input for mains adapter provided.
BLUETOOTH ECEIVE
- This model WA-2152B allows MP3 files contained in your mobile telephone to be played if the device is
paired with the bluetooth receiver module of this amplifier.
- In order to pair your mobile telephone with the bluetooth receiver, select the Bluetooth option with the
BLUETOOTH/AUX button located on the front panel of the amplifier. With the bluetooth option activated
in your mobile telephone, select the corresponding device from the list of bluetooth devices. At that
moment, your mobile telephone will be paired with the device.
-4-
EN
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Pá ina 4

CONNECTION
- Make the connections with the amplifier and all the components of the installation switched off and
disconnected from the power supply.
- It is possible to connect different sources to the AUX inputs on the front panel and the MIC or INPUT on
the rear panel of the amplifier.
- The amplifier is low impedance, therefore the speakers must be connected in a series/parallel circuit so
that the impedance load of the speakers is the same as the speaker output impedance and that the power
supplied by the amplifier does not exceed that withstood by the speakers:
15 + 15 W RMS at 4 Ω
- Connect the amplifier mod. WA-2152B to the power supply.
- Once the connections have been made according to your needs, connect the devices to the power supply
and switch them on. After use, do not forget to switch the device off and disconnect it from the power
supply.
TECHNICAL SPECIFICATIONS
WA-2152B
CHA ACTE ISTICS Bluetooth stereo amplifier
Plays music from smartphones, tablets and other bluetooth
devices
Class D amplification circuit
Aluminium case for surface assembly
POWE 15 + 15 W RMS a 4 Ω
P OTECTION Short circuit, temperature and surge
ESPONSE 20-20.000 Hz
DISTO SIÓN Harmonic: 0.4% at 1 kHz
ENT ADAS 1 dynamic mic., 6.3 mm mono jack
1 aux, 2 x RCA
1 aux, 3.5 mm stereo jack
SALIDAS Loudspeakers 4-8 Ω, spring terminals
INDICADO ES LED pairing indicator
ALIMENTACIÓN 12 V DC, 2 A with adapter included
MEDIDAS 152 x 41 x 114 mm depth
-5-
EN
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Pá ina 5

DECLA ATION OF CONFO MITY
FONESTA SISTEMAS S.A.
Polígono de Trascueto s/n
39600 Revilla de Camargo, Cantabria (España)
Declares, under its responsibility, that the following equipment:
Description: Bluetooth amplifier
Brand: FONESTAR
Model: WA-2152B
complies with that shown in the European Parliament and Council RED directive 2014/53/EU of 16th April, 2014.
This is class 1 equipment and has no use restrictions.
List of standards applied
Standards Area Compliance with the 2014/53/EU Essential Diective
requirements
EN 300 328: V2.1.1 RADIO Section 3.2 2014/53/EU directive
EN 301 489-17: V3.2.0 EMC Section 3.1b 2014/53/EU directive
EN 301 489-1: V2.2.0
EN 60065:2014 ELECTRICAL SAFETY Section 3.1a 2014/53/EU directive
Santander, 26th une, 2017
uan Vallejo
Technical Engineer, Sales Department
WA ANTY
This product has been tested and has passed the corresponding quality control prior to being put on the market.
FONESTA guarantees the suitability of the product for its specified use during a period of 2 years from the
delivery date and commits itself to repair or substitute the goods as expressed in the Spanish law ‘La Ley General
para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo 1/2007 16 Noviembre.
The lack of conformity in the first six months after purchase, due to a manufacturing defect, will be rectified with
no more than showing the proof of purchase. After six months FONESTA reserves the right to demand proof
of the product being sold with that problem.
This warranty does not include damage produced by: inappropriate use or negligence, accidents, worn out parts
due to use, breakages, burns, spilt liquids or other substances, excessive humidity, battery deterioration and
internal manipulation of the device, the software or its components by unauthorized persons, and in general any
use that is unrelated to the nature and purpose of the product.
If any service is needed during the warranty period because of lack of conformity, please contact the business
or distributor where the product was purchased in no more than 2 months after being conscious of the problem.
It is only necessary to contact FONESTA if it is impossible or imposes an undue burden for them to solve it.
To benefit from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no
corrections or crossing out.
This document adds information, and never decreases the consumers’ rights, which in all cases are protected
by the Spanish law ‘La Ley General para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo
1/2007 16 Noviembre’.
FONESTA is a member of ECOEMBALA ES ESPAÑA, S.A. “ECOEMBES”, with number 03497 and all our products
carry the symbol, backed by our membership and subscription to the above mentioned organization with the recycling
and subsequent management of our packaging.
FONESTAR, S.A. - NIF: A28780443 - Poligono Trascueto - 39600 - Revilla de Camargo, Cantabria (SPAIN)
www.fonestar.com
-6-
EN
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Pá ina 6

-7-
EN
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Pá ina 7

www.fonestar.com
WA-2152B_MANUAL_(EN)_20171107_Maquetación 1 07/11/2017 13:40 Pá ina 8