FOR-A TN'G Scale 550 User manual

Quick Start Guide
EN
Weight Scale

Performing a Test
Age
• Press to set the age between 6 and 99.
Press SET.
Language
• Press to set the voice language (English,
Spanish or French). Press SET.
Volume
• Press to set the voice volume. Press SET.
Press SET to exit the setting mode.
Helpful Information
• When receiving the scale for the first time, or
if you move the scale to a different location,
press SET to turn the scale on and wait for
the LCD to display 0.0. Please wait 2 seconds
then start the measurement.
• Each profile is set up individually. Selecting
Imperial or Metric for one profile does not
affect the others.
Start with the scale off. Press SET until the scale
turns on. Press SET twice to enter settings.
Personal Profile Number
• Press to select a number from P1 to P5.
Press SET.
Gender
• Press to set gender. Press SET.
Units
• Press to set the height to ft’ in” or cm
units. Press SET.
• When the height is set to ft’ in”, the unit of
weight will be automatically set to pounds.
When the height is set to cm, the unit of
weight will be automatically set to kilograms.
Height
• Press to set the height between 3’ 3.5”
and 7’ 2.5” / 100 cm and 220 cm. Press SET.

How do I upload results?
The FORA TN’G Scale 550 has Bluetooth capabilities
and is compatible with various FORA Apps as well as the
Gateway.
To upload results via the Gateway, please refer to the
Gateway guide.
To pair the device to the iFORA Smart or iFORA MP app,
please refer to the iFORA App Quick Guides.
What are the cleaning and disinfecting procedures for the
TN’G 550?
To clean the outside of the scale, wipe it with a slightly
damped cloth or a mild cleaning agent, and then dry the
device with a soft dry cloth. Do not immerse the device in
water and do not use chemical or organic solvents to clean
the scale.
For additional information on the weight scale please refer
to the user manual.
How does the TN’G Scale 550 weight scale work?
The TN’G 550 Weight Scale is Bluetooth-enabled to help
you keep track of your trends for your weight loss goals
or CHF. Download the iFORA Smart App or iFORA MP
App from your smartphone’s app store to review your
data. Data automatically uploads to the 24/7 HealthView
Telehealth System via Bluetooth or cellular Gateway.
What is the maximum weight limit of this scale?
The maximum weight limit is 550 lbs.
What’s the proper way of taking a measurement?
Place the scale on a hard, flat surface. Weigh yourself
at the same time every day, before breakfast or before
getting dressed. Measurement must be taken with your
feet dry and weight evenly distributed.
How often should I replace the batteries?
The lifespan of your battery will vary considerably with
how it is used, how it is maintained, temperature, and
other factors such as frequency of testing. The weight
scale comes with four 1.5V AAA alkaline batteries.
Replace them when the low battery icon appears.
Where can I review my data?
The Bluetooth-enabled weight scale connects to either
the iFORA Smart App or iFORA MP App, where you can
review your latest readings and keep track of your trends.
FAQ

For questions on how to use the FORA medical devices, please contact the
FORA Customer Service Line at 1-888-307-8188
Troubleshooting
Measurements
Place the scale on a hard, flat surface. Soft or uneven flooring (e.g. carpets, rugs) may cause the scale to give an
inaccurate weight reading. A non-slip stable platform may be used if a hard floor surface is not available.
• Measurement must be taken with your feet dry and positioned correctly on the electrodes. Remove your
shoes and socks before stepping onto the scale.
• Step onto the scale with your feet parallel to each other and your weight evenly distributed.
• Weigh yourself on the same scale at the same time every day, before breakfast or before getting dressed.
Bluetooth
• While the weight scale is in transmission mode, it will be unable to perform a test.
• Make sure that your smartphone has turned on Bluetooth before transmitting the data and the weight scale
is within the receiving range. For the requirement of OS version, please refer to your app store’s app
download page.
• Compatibility issues between your mobile device and the meter might occur due to the way Bluetooth
functionality is implemented by the various mobile device manufacturers.
“HI” Error Message
• Receiving a “Hi” error message indicates the subject exceeds the maximum capacity of the device. If you
follow the recommended action but the problem persists, or if error messages other than the ones shown
above appear, please contact customer service. Do not attempt to repair the device by yourself and do
not try to disassemble the scale under any circumstances.
“Lo” Error Message
• Low battery error message. Please switch to new batteries and try the measurement again.