FOR-A W550 User manual

ver 1.0 2019/12
311-2555400-010
Operating Instructions
IMPORTANT SAFETY PRECAUTIONS
Thank you for purchasing the FORA W550 Weight Scale. This manual provides
important information that will help you to use this device. If you have any questions
regarding this product, please contact the place of purchase.
1. Use this device ONLY for the intended use described in this manual.
2. Read all the instructions and information in this manual before using this device.
3. Do NOT use the device if it is not working properly or damaged.
4. Consult your physician or healthcare provider before beginning a weight loss or
exercise program.
5. Consult your physician before using this device if you are pregnant.
6. Do NOT step on the edge of the weighing platform or jump on the weighing
platform.
7. Do NOT step on the weighing platform if your body or feet are wet.
8. Do NOT use the device on slippery surfaces such as wet floors.
9. Do NOT use cell phones, microwaves or other devices that generate strong
electrical or electromagnetic fields near the device. This may result in an
operational failure.
10. Do NOT disassemble or try to modify the device.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
BEFORE YOU BEGIN
Body Mass Index
The Body Mass Index (BMI) is a number that is often called upon to evaluate body
weight.
Recommended Measurement Time
To obtain an accurate reading, we recommend that you always take the measurement
in the same environment and at the same time of day. Avoid taking measurements
under the following conditions:
• Immediately after a bath or exercise
• After drinking alcohol or a large amount of water
• Less than 2 hours after a meal
If you take a measurement under any of the above conditions, the calculated body
composition may be significantly different from the actual composition due to changes
in water content in the body.
Contents of the System
Your new FORA W550 kit contains:
1. Weight Scale
2. Operating Instructions
3. Warranty Card
4. Four 1.5V Alkaline Batteries
BMI = body weight (Kg)
(height(m))² BMI = body weight (lb)×703
(height(in))²
Front
Back
SCALE OVERVIEW
SCREEN DISPLAY
5 4 3 2 1
8
9
6 7
10
Bluetooth Indicator
Age Indicator
BMI Indicator
Gender Indicator
Personal Profile Number
Height Unit
Weight Unit
Measurement Result
Volume Indicator
Battery Indicator
6
8
7
9
10
1
2
3
4
5
LCD Screen
Toe Position
Heel Position
Down Button
SET Button
Up Button
Battery Cover /
Compartment
Supporting Stand
6
7
8
1
2
3
4
5
1
4 65
2
3
8
7
SETTING THE SCALE
Before using the scale for the first time, input these settings. To ensure accuracy,
make sure you complete the steps below and save the desired settings.
Start with the scale off. Press SET to turn the scale on:
3. Press SET to exit the setting mode.
If you make a mistake before finishing, repeat the
steps from “Select the personal profile number.”
NOTE:
Your settings are automatically saved when you exit
the setting mode.
1. Select the personal profile number.
Press ▲ or ▼ to select a number from P1 to P5. Press
SET.
2. Enter the personal profile data.
Press ▲ or ▼ to set the gender to male or female.
Press SET.
Press ▲ or ▼ to set the height unit to ft’ in” or cm
unit. Press SET.
When the height unit is set to ft’ in”, the unit of weight
will be automatically set to pounds. When the height
unit is set to cm, the unit of weight will be
automatically set to kilograms.
Press ▲ or ▼ to set the height between 3’ 3.5” and
7’ 2.5” / 100 cm and 220 cm. Press SET.
Press ▲ or ▼ to set the age between 6 and 99. Press
SET.
Press ▲ or ▼ to set the voice language (English,
French or Arabic). Press SET.
Press ▲ or ▼ to set the voice volume. Press SET.
TAKING MEASUREMENTS
Before Measuring
• Place the scale on a hard, flat surface. Soft or uneven flooring (e.g. carpets, rugs)
may cause the scale to give an inaccurate weight reading.
• Measurement must be taken with your feet dry and positioned correctly. Remove
your shoes and socks before stepping onto the scale.
• Step onto the scale with your feet parallel to each other and your weight evenly
distributed.
• Weigh yourself on the same scale at the same time every day, before breakfast or
before getting dressed.
NOTE:
When receiving the scale for the first time, or if you move the scale to a different
location, press the SET button and quickly release to turn the scale on and wait for the
LCD to display 0.0. Please wait 2 seconds then start the measurement.
Measuring weight and Body Mass index (BMI)
NOTE:
The scale will automatically turn on while stepping on
it under standby mode.
WEIGHT SCALE
W550
1. Press SET or tap on the weighing platform to turn
on the scale. The scale displays the profile setting of
the last user.
2. Wait for “0.0” to appear on the display window.
Press ▲ or ▼ to select the desired profile number.
3. Step onto the weighing platform.
Stand still and make sure your weight is evenly
distributed.

SCALE MEMORY
Your scale stores up to a 135 measurements for all 5 personal profiles. Results in
memory can be transmitted to the mobile device by wireless connection. This allows
you to review your measurements on your mobile device.
Bluetooth pairing and data transmission
Please make sure you have installed the software in your device (smart phone or
tablet) before pairing. Please note that you must pair your weight scale to your device
before transmitting data.
Pairing with your mobile device
1. Press and Hold SET for 5 seconds until the Bluetooth symbol is displayed and starts
to flash.
2. Make sure your mobile device is in Bluetooth mode, then launch the iFORA WS APP
on your device, go to the settings tab and press pair. Then press “search”, the APP will
then start to search for your scale.
3. After successfully pairing the APP to your scale, the Bluetooth function on the scale
will then start to transmit your data to your APP.
Bluetooth indicator on the weight scale
5. Step off the weighing platform.
The result is saved in the scale memory and the scale enters into Bluetooth mode.
NOTE:
● While the weight scale is in transmission mode, it will be unable to perform a test.
● Make sure that your device supporting Bluetooth Smart Technology has turned on
Bluetooth before transmitting the data and the weight scale is within the receiving
range. For the requirement of OS version, please find on App Store or Google Play
when you download the app.
● A compatibility issue between your mobile device and the meter might occur due to
the way Bluetooth functionality is implemented by the various mobile device
manufacturers.
SPECIFICATIONS
General Information
Model No. : W550
Power Source : Four 1.5V AAA alkaline batteries
Dimensions & Weight : 340 (L) x 400 mm (W) x 26 mm (H), 3200 g without batteries
Size of LCD : 98 (L) x 92 (W) (mm)
LCD : Backlit LCD
Range :
Gender: Male / Female
Height: 3’ 3.5” to 7’ 2.5” / 100 to 220 cm
Age: 6 to 99
Weight: 8.8 to 550 lb / 4 to 250 kg
Operating Conditions : 5 °C to 40 °C (41°F to 104°F), below 85% R.H.
Storage Conditions : -25°C to 70°C (-13°F to 158°F), below 93% R.H.
Battery Life :
At least 180 measurements (3 minutes each time) or at least 3 months on standby.
User Profile : 5 individuals
Weight Unit : lb / kg
Transmission : Bluetooth
Auto Switch-Off:
1. If the meter is idle for 30 seconds during the measuring mode, it will switch off
automatically.
2. If the meter is idle for 3 minutes during the Bluetooth mode, it will switch off
automatically.
This device has been tested to meet the electrical and safety requirements of: IEC/EN
61010-1, IEC/EN 61326-1, EN 301 489-17, EN 300 328.
Once a stable value is obtained, the reading will flash
three times and then calculate your BMI.
1 2
4
5
1 2 6
7
3 3
4. Understanding your displayed result.
STATUS
The Bluetooth function is enabled and waiting for
connection.
The Bluetooth connection is established.
BLUETOOTH INDICATOR
Flashing
Solid
Personal Profile Number
Gender: Male
Volume
Your Weight
Weight Unit
BMI Symbol
Your BMI
5
7
6
1
2
3
4
WARNING!
If the incorrect type of battery is used, it may cause damage to the scale.
Replacing the batteries
When replacing the batteries, make
sure that the scale is turned off.
1. Press the edge of the battery cover
and lift it up.
2. Remove the old batteries and replace
them with four 1.5V alkaline batteries.
3. Close the battery cover.
4. Zero out. (See NOTE)
NOTE:
● Zero out - Press the SET button and quickly release to turn the scale on and wait for
the LCD to display 0.0. Please wait 2 seconds then start the measurement.
● Replacing the batteries does not affect the test results stored in memory.
● Properly dispose of the batteries according to your local environmental regulations.
● Batteries may leak chemicals if left unused for a long time. Remove the batteries if
you are not going to use the device for an extended period (i.e. 3 months or more).
Cleaning
● To clean the outside of the scale, wipe it with a slightly damped cloth and water or a
mild cleaning agent, and then dry the device with a soft dry cloth. Do NOT immerse
the device in water.
● Do NOT use chemical or organic solvents to clean the scale.
● Wipe the scale clean at once if any grease, sauce, vinegar, juice or other
substances that may cause damage are spilled on the scale.
Scale Storage
● Storage condition: -25°C to 70°C (-13°F to 158°F), below 93% relative humidity.
● Avoid dropping the scale or heavy impact.
● Avoid direct sunlight and high levels of humidity.
If you follow the recommended action but the problem persists, or if error messages
other than the ones shown above appear, please contact local customer service. Do
not attempt to repair the device by yourself and do not try to disassemble the scale
under any circumstances.
SYSTEM TROUBLESHOOTING
Error Messages
WHAT IT MEANS
The weighing subject exceeds
the maximum capacity of the
device.
WHAT TO DO
Remove the weighing subject
from the platform to avoid
damage.
MESSAGE
SYMBOL INFORMATION
Referent
Consult instructions for
use
Symbol
Serial number
CE Mark
Temperature limitation
Collection for electrical
and electronic equipment
Manufacturer
Humidity limitation
MAINTENANCE
Your scale uses four 1.5V AAA alkaline batteries.
Low Battery Signal
The scale will display the message shown to alert you
when the scale power is running low. This means it is
about time to replace the batteries.
Data transmission
After each measurement, the Bluetooth function on the scale will activate and try to
connect to your paired device (e.g smart phone or tablet) to transmit data.
Referent
Caution, consult
accompanying documents
Symbol
Type BF equipment
SN
ForaCare Suisse AG
CH-9000 St. Gallen, Switzerland
www.foracare.com
5”