Forest SLATTED PALMA ARBOUR User manual

Tape Measure Pozidrive
Screwdriver
Drill & 2-3mm
Drill Bits
Hammer Ladder Spirit Level
REMINDER
Always pre-drill before
screwing.
IMPORTANT
Assembly requires 2+
adults.
ISSUE: 0122
It is vital that you build your new arbour on a level ground in your desired location.
SLATTED PALMA ARBOUR
INSTRUCTIONS
We recommend using the following tools (not supplied):
THE ROOF OF THIS ARBOUR IS NOT A LOAD BEARING STRUCTURE
Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
EU Authorised Representative: Authorised Representative Service, 77 Camden Street Lower Dublin, D02 XE80, Ireland
Missing something or need more information?
Call our aftersales team on
0333 321 3142
Visit our website for spare instructions and
more information
www.forestgarden.co.uk
FIXING PACK CONTAINS:
FIXING PACK CODE: PALMAAFP
PLEASE KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN
CHECK AND TIGHTEN ALL THE FIXINGS APPLIED TO THIS PRODUCT ON A REGULAR BASIS.
4x50mm Screws
QTY: 18
5x70mm Screws
QTY: 8
3.5x30mm Screws
QTY: 16
Making British gardens great

810mm
150mm
530mm
30MM
SCREWS
70MM
SCREWS
30MM
SCREWS 30MM SCREWS
Turn the arbour over and secure the rest of the Braces
as shown above.
Slot the Braces onto the Long Rafter and butt the other
end up against the Side Panel post as shown above.
Secure a Brace in each corner.
3
SIDE PANELS
LONG RAFTER
Position and secure the Side Panels to the Long
Rafters as shown above. Use the measurement above
as a positioning guide.
Lay out your Long Rafters on the oor and turn your
Side Panels upside down to slot in place. Position the
Side Panels using the measurement provided.
1
2
Position your Seat using the measurement provided as
a guide in between the Side Panels. Feel free to alter
the height based on your preference.
Secure the Seat to the Side Panel posts as shown
above. Repeat on both sides to fully x in place.
SEAT
BRACE

30mm 205mm
193.75mm
50MM
SCREWS
50MM
SCREWS 50MM SCREWS
Secure the Back Rest Battens to the Side Panel posts
as shown above.
Position the Back Rest Battens using the measurements
provided as a guide onto the Side Panels. Feel free to
alter the measurements based on your preference.
4
Position and secure the Short Rafters, starting with 2
x Short Rafters positioned centrally on the Side Panel
posts as shown above.
5
Position and secure the rest of the Short Rafters, using
the measurement provided to space evenly.
HEALTH & SAFETY
THE ROOF OF THIS ARCH IS NOT A LOAD BEARING STRUCTURE
DO NOT CLIMB THIS PRODUCT
We strongly recommend that PPE (Personal Protective Equipment) is used throughout your build to ensure you are
protected from any potential health and safety risks. Do not exempt yourself from wearing PPE.
BACK REST BATTEN
SHORT RAFTER

TREATED TIMBER CONTAINING A BIOCIDAL PRODUCT
CONTROL OF WOOD DESTROYING ORGANISMS
Active Ingredients - Propiconazole, Tebuconazole, IPBC, Permethrine, Benzyl-C12-16-Alkyldimethyl Chlorides. (Dip Treated)
Basic Copper Carbonate, DDA Carbonate, DDA Chloride. (Pressure Treated)
Wear gloves when handling. Avoid inhalation of sawdust. Do not use in contact with drinking water or food. Do not use for animal
bedding or in sh ponds. Dispose of treated wood responsibly.
Use the labelled components to help identify the part code and description.
CHECK YOU HAVE ALL YOUR PARTS PRIOR TO ASSEMBLY.
(The parts do not have codes on them. They are listed below should you need to order one.)
Timber is a natural material of which will shrink and swell as a result of varying moisture content.
Assembly of damaged parts may be deemed to be acceptance and this may affect the remedies you are entitled to. If the product is not constructed
in accordance with the instructions, or is altered in anyway (e.g. painted), the manufacturer cannot be held liable for any resulting damage.
The components provided may be heavy. Please lift with caution and with a minimum of 2 people.
Label Part Code Description No.
APALMASIDE Side Panel 480x2090mm 2
B58201200AII45PPT Long Rafter 58x20x1200mm 2
CPALMASEAT Seat 480x810mm 1
D45450439AII45PPT Brace 45x45x439mm 4
E75300900PPT Back Rest Batten 75x30x900mm 2
F58200620AII45PPT Short Rafter 58x20x620mm 5
Slatted Palma Arbour (PALMAA)
A B C D EF