Forest CORNER LINEAR PLANTER User manual

Making British gardens great
CORNER LINEAR PLANTER
INSTRUCTIONS (800x800mm)
ISSUE: 0121
FIXING PACK CODE: CORNLINPL80FP
Tape Measure
We recommend using the following tools
(not supplied):
Drill & 2mm
Drill Bit
Rubber Mallet
FIXING PACK CONTAINS:
PLEASE KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM
CHILDREN
4 x 60mm Screws
QTY: 14
Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
REMINDER
Always pre-drill before
screwing.
IMPORTANT
Assembly requires 2+
adults.
Missing something or need more information?
Call our aftersales team on
0333 321 3142
Visit our website for spare instructions and
more information
www.forestgarden.co.uk
Pozidrive
Screwdriver
1
Position the oors in your desired location and turn
them upside down. Place an L-Bracket at each
adjoining corner.
4 x 50mm Screws
QTY: 10
3.5 x 30mm Screws
QTY: 14
FLOOR (760mm)
FLOOR (400mm)
Fix the 2 x L-Brackets using 25mm screws to the
battens in the adjoining corners to secure the oors
together.
3.5 x 25mm Screws
QTY: 8
50mm L-Brackets
QTY: 2

3 4
6
Ensure to angle the 2 x screws as shown above to
secure into the oor bearers beneath.
Secure the second Back Panel (780mm) to the rst
Back Panel using 50mm screws.
Secure the Back Panel (780mm) to the oor bearers
beneath. Ensure to angle the 1 x screw to secure into
place as shown above.
Secure the rst Front Panel (448mm). Screw through
the End Panel (360mm) into the Front Panel (448mm)
using 50mm screws.
60MM
SCREWS
60MM
SCREWS
5
60MM
SCREWS
BACK PANEL (780mm)
END PANEL (360mm) FRONT PANEL (448mm)
Secure the End Panel (360mm). Screw into the Back
Panel using 50mm screws and x to the oor bearer
using a 60mm screw.
BACK PANEL (780mm)
2
Secure the rst Back Panel (800mm). Screw into the
bearers of the oor beneath. Ensure the side battens on
the panel are ush to each end of the oor.
60MM
SCREWS
BACK PANEL (800mm)

FRONT PANEL (420mm)
60MM
SCREWS
Secure the second Front Panel (420mm). Secure it to
the rst Front Panel using 60mm screws as shown above.
7
Secure the other End Panel (360mm). Screw into the
Back Panel using 50mm screws and x to the oor
bearer using a 60mm screw.
Secure the second Front Panel (420mm). Screw
through the End Panel (360mm) into the Front Panel
(420mm) using 50mm screws.
8
Layout and position the Jute Liner material inside
your planter. Overlap over the top edge and use the
Fascias to hold into place.
11
JUTE LINER
9
60MM
SCREWS
END PANEL (360mm)
BACK PANEL (800mm)
Secure the Fascias to the Panels. Ensure the Jute Liner
is held in position when screwing the Fascias into place.
END PANEL
FASCIA FRONT PANEL
FASCIA
BACK PANEL
FASCIA
Secure the Front Panels to the Floor bearers. Turn the
planter onto its side and screw through the bearers into
the Front Panels to x them into place.
10
FRONT PANEL (420mm)
END PANEL (360mm)
60MM
SCREWS

TREATED TIMBER CONTAINING A BIOCIDAL PRODUCT
CONTROL OF WOOD DESTROYING ORGANISMS
Active Ingredients - Propiconazole, Tebuconazole, IPBC, Permethrine, Benzyl-C12-16-Alkyldimethyl Chlorides. (Dip Treated)
Basic Copper Carbonate, DDA Carbonate, DDA Chloride. (Pressure Treated)
Wear gloves when handling. Avoid inhalation of sawdust. Do not use in contact with drinking water or food. Do not use for animal
bedding or in sh ponds. Dispose of treated wood responsibly.
HEALTH & SAFETY
We strongly recommend that PPE (Personal Protective Equipment) is used throughout your build to ensure you are protected from
any potential health and safety risks. Do not exempt yourself from wearing PPE.
CHECK YOU HAVE ALL YOUR PARTS.
(The parts do not have codes on them. They are listed below should you need to order one.)
The components provided may be heavy. Please lift with caution and with a minimum of 2 people.
Label Part Code Description No.
ASLPLB760 Floor 760x360x43mm 1
BSPLB400 Floor 400x360x43mm 1
CSPLP800 Back Panel 800x400x48mm 1
DSPLP780 Back Panel 780x400x48mm 1
ESPLP360 End Panel 360x400x48mm 2
FSPLP448 Front Panel 448x400x48mm 1
GSPLP420 Front Panel 420x400x48mm 1
HJLINER8080 Jute Liner 1
I60200800PAII45PT Back Panel Fascia 800x60x20mm 2
J60200400PAII45PT End Panel Fascia 400x60x20mm 2
K60200460PAII45PT Front Panel Fascia 460x60x20mm 2
Corner Linear Planter 800x800mm (CORNLINPL80)
CHECK & TIGHTEN ALL FIXINGS APPLIED TO THE PRODUCT ON A REGULAR BASIS
Use the labelled components to help identify the part code and description.
ABCD
E F G I J K H