FOREVER ForeVive Lite User manual

Instruction manual
ForeVive Lite
Model: SB-315

Thank you for buying the Forever brand product. Before use, read this instruction
manual and keep it for future reference. Do not open the device on your own –any
repairs should be carried out by a serviceman. Only use original parts and
accessories supplied by the manufacturer. The device should not be exposed to
direct sunlight, fire or other heat sources. We hope that Forever product will meet
your expectations.
Specification
Display: 1.3” 240x240 px
Standby time: up to 10 days
Waterproofness: IP67
Battery: 155 mAh
Weight: 57 g
Band length: 250 mm
Bluetooth: 5.0
Compatibility: iOS ≥10.0; Android ≥5.0
1. General information
Maximum radio frequency power emitted in the frequency range
Frequency range
Bluetooth 2402-2480 MHz
Maximum emitted power
-0.55 dBm (EiRP)

Product description
1. Display
2. Touch function button
3. Heart rate sensor
4. Charging port
Charging the battery
To charge the device, place it in the included charging bracket. Ensure that the
device's charging connector and holder are in contact with each other. Then close
the bracket cover and connect the USB cable to the power source. Once properly
connected, a charging animation will appear on the screen.
1. Device charging connector
2. Bracket charging connector
Installing the “Forever Smart” application on your
smartphone
Find the “Forever Smart” application in Google Play or App Store. You can also scan
the QR code below. Then install the app on your phone.
Android/iOS
Connecting the smartwatch with your phone
1. Activate Bluetooth in your phone.
2. Launch the “Forever Smart” app on your smartphone, then enter your details –
such as name, gender, date of birth, weight, height –in the user profile menu

and click “Save”.
3. Select the smartwatch model you want to connect to.
4. Refresh the list of Bluetooth devices by dragging the screen down, then select
the name of your device and wait for the connection to be established.
Disconnecting the device from your smartphone
1. Open the “Forever Smart” app on your smartphone.
2. Press “Disconnect Smartwatch” in the “Settings” menu, then confirm with “OK”.
3. For iOS, to disconnect the smartwatch from your phone, click “Disconnect
Device” in the “Settings” menu of the “Forever Smart” app, then go to your
smartphone's Bluetooth settings and select “Forget this device”.
Operating the device
Turning on: Press and hold the function button for 3 seconds.
Illuminating the screen: press the function button or move your wrist.
Viewing the functions: Press the function button to switch between particular
functions.
Confirmation: hold down the function button to confirm the function selection.
2. Functions
Watch dial interface
After connecting the device to the “Forever Smart” app, the watch dial will display
the current time and date.
To change to a different watch dial, hold down the function button on the current
dial screen. The dial will change –repeat the step until you obtain the desired watch
dial.

Activity measurement
The device automatically gathers your daily activity data.
Press the function button to move between screens showing the number of steps,
distance traveled and calories burnt.
Once the data is synced to your phone, you can check your activity history in the
app.
Heart rate
To start measuring your heart rate, go to the heart rate measurement screen. Hold
down the function button and the device will start measuring and display the
result.
Once the data is synced to your phone, you can check your measurement history
in the app.
Sport mode
Go to the “Sport” screen, then hold down the function button to view the sport
modes.
The device has four modes: Walking, Running, Hiking, Cycling. You can select the
mode of interest by holding down the function button and start your workout. The
device will start recording data.
The data is displayed on the screen during your workout.