FOREVER ForeVigo 2 SW-310 User manual

User Manual for Forever ForeVigo 2
SW-310 Waterproof Smartwatch

Specifications
- Bluetooth version: v5.0
- Display size: 1,4"
- Resolution: 240 x 240
- Battery capacity: 180mAh
- Waterproof certification: IP68
- Charging time: 2h
- Working time: up to 12 days
- Strip length: 240mm
1. Touch interface
2. Functions button
3. Charging plate
4. Heart-rate sensor

Forever Smart app
Search and install the “Forever Smart” app from Google Play Store for
Android or App Store for iOS. You can also scan the QR code below:
To connect the smartwatch to the smartphone, you must first enable Bluetooth
on your phone. Open the Forever Smart app and fill in all the requested information
in the Settings menu. Tap the Connect device button in the Settings menu and select
the smartwatch icon to connect. Choose your device name to pair it with your
smartphone.
To disconnect the smartwatch from the Android smartphone, open the Forever
Smart app on your phone, tap the Disconnect device in the Settings menu, and
confirm by clicking Ok.
To disconnect your smartwatch from an iPhone, click “Disconnect device” in
the “Settings” menu of the “Forever Smart” app, go to the Bluetooth settings on your
iPhone, then access and select the “Forget This Device” option.
How to use
- Turn on: Press and hold the function button for 3 seconds.
- Go to the menu: Slide from left to right in the watch face interface.
- Select a function: Slide up/down or right/left in the watch face and then tap the
icon.
- Confirm: Tap the icon.
- Exit the menu: Slide the interface from left to right.
- Return to the watch face: Short-press the function button in any interface.
- Check messages: Slide from bottom to top in the watch face interface.

Menu navigation
Go to the menu interfaces:
- Slide from left to right in the watch face interface to enter the menu interfaces.
- Slide up and down to switch the menu interfaces.
- Tap the icon to enter the sub-menu. Slide from left to right to return to the
previous menu.
Go to the messages shortcut interface:
- Slide from bottom to top in the watch face interface.
Go to other shortcuts interface:
- Slide from top to bottom in the watch face interface.

Shortcut menu
Interface brightness: You can tap the brightness icon to adjust
(+/-) the interface brightness.
Find phone: If your smartwatch is connected with Forever Smart
app, you can find your phone by tapping this icon
Shut down: You can shut down your smartwatch by tapping this
icon.
Settings: You can go to the settings of your smartwatch quickly
by tapping this icon.
Raise your hand to activate the display: You can turn on or off the
function of raising your hand to activate the display by tapping
this icon.
Multi-sport menu
Tap this icon to enter the multi-sport mode.
The smartwatch has 6 sports modes: walking,
running, cycling, indoor run, hiking, and
swimming. Choose a sport mode you want,
and then do sports. The smart watch records
your exercise data.
If you want to end the sports, slide the
interface to the right and tap the “√” icon to
finish your sports and save the data. The
smartwatch displays your exercise data. If
you’ve connected your smartwatch with the Forever Smart app via Bluetooth, you
can also check your exercise data in the app.
Please note: Exercise time should be more than 5 minutes, distance should
be more than 0,1km and calories should be more than 1Kcal, otherwise, the data
cannot be saved.
Heart-rate monitor
Tap the icon to monitor your current heart rate. To
exit the heart rate monitor, slide the interface to the
right. If you’ve connected your smartwatch with the
Forever Smart app via Bluetooth and turned on
Healthy detection in the advanced settings of the
app, you can also check your heart rate data in the
app.

Sleep monitor
The smart watch automatically monitors your sleep between 9:30 p.m.
and 11 a.m.
When you get up the next day, the smartwatch displays your sleep
report about the time of total sleep, light sleep, and deep sleep. If
you’ve connected your smartwatch with the Forever Smart app via
Bluetooth, you can also check more detailed sleep reports in the app.
Alarm menu
You can set reminders in the Forever Smart app. When the alarm time is up,
the alarm icon is animated and the smartwatch vibrates.
Messages menu
Slide the watch face from bottom to top, and then
you can check your phone calls, SMS, QQ,
WeChat, Whatsapp, Facebook and Twitter
notifications, etc. The messages will be
automatically deleted by tapping the interface.
Weather menu
If you’ve connected your smartwatch with the Forever Smart app via
Bluetooth, the smartwatch displays the weather forecast. You can
manually set the city or automatically set a city in the Forever Smart
app.
Remote capture
To use this feature, choose “Shake and take a photo” in the advanced settings
of the app and shake your hand 3 times to take a photo. With the remote capture
function, you can take pictures remotely from your smartwatch.

Music playback control
Tap the music icon to enter the music playback control interface.
You can select the previous/next song, and play/pause music. To exit
the music playback control, slide the interface from left to right.
Sedentary reminder
Go to the Advanced settings under the Settings of the Forever Smart app to
set the time intervals (minutes), start time, and end time. Slide the interface to the
right to exit.
Find phone
If your smartwatch is connected to the Forever Smart app, you can find your
phone by tapping this icon and your phone will ring.
Watch faces
Tap the icon and then slide left or right to go through the different watch faces
and choose the one you like.
Interface brightness
You can tap the brightness icon to adjust (+/-) the interface brightness.
System
You can check the system of your smartwatch by tapping this icon.
Languages
You can set the language here.
Shut down
You can shut down your smartwatch by tapping this icon.
Reset
You can reset your smartwatch by tapping this icon.