Fortinet FortiGate 60M User manual

FortiGate/FortiWiFi
QuickStart Guide
.

2
.
.
QuickStart Guide FortiGate/FortiWiFi
01-520-250472-201810
Copyright© 2018 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names
herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal
lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants
that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on
Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or
development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied.
Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.

1
.
.
QuickStart Guide
Register your Fortinet product to receive:
• Technical Support
• New product features
• Protection from new threats
Vous devez enregistrer le produit pour
recevoir:
• Support technique
• Nouvelles fonctionnalitées du produit
• Protection contre de nouvelles menaces
La reistrazione ti permette di usufruire di:
• Supporto Tecnico
• Nuove funzionalita
• Proteezione dalle ultime minaccce
Debe registrar el producto para recibir:
• Apoyo técnico
• Nuevas funcionalidades del producto
• Protección contra ataques
Register for Support
登録のお願い
本日、フォーティネット製品の登録をしてください。
登録すると次のメリットがあります。
テクニカルサポート • 新機能の追加 • 新しい脅威
への防御
请马上注册您的飞塔产品
您在注册以后才能得到技术支持、新产品特
点信息、最新威胁防护
http://forti.net/support
Toll free: 1 866 648 4638
Phone: [phone]
Fax: [phone]
Email: [email protected]
About Fortinet Security Fabric Licenses & Subscriptions

2
.
.
http://forti.net/docs/fortigate
Device Guide
Included Accessories List
Port Guide
LED Guide
Mounting Guide

3
.
.
QuickStart Guide
FortiGate Setup
1
SFP Tranceivers
2
Web browser
with Ethernet cable
Terminal emulation
with console cable
AB
C
AB
Installation Removal
iOS
FortiExplorer app configuration

4
.
.
To Connect to the GUI
1. Connect the Ethernet cable.
2. Configure the management computer to be on the same subnet as the internal interface as the FortiGate unit:
IP address: 192.168.1.2
Netmask: 255.255.255.0
3. Visit 192.168.1.99 in your web browser.
4. Login using username “admin” and no password.
5. Configure your device and save your settings.
6. Register your device from the dashboard page.
Web Browser with Ethernet Cable
https://
MGMT or MGMT 1
If the device has
neither use port 1
A
FortiGate Setup
1

5
.
.
QuickStart Guide
Terminal Emulation with Console Cable
To Connect to the CLI
1. Connect the FortiGate unit console port to the management computer using the provided console cable.
2. Start a terminal emulation program on the management computer, select the appropriate COM port, and use the following
settings:
Baud rate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
3. Press Enter on your keyboard to connect to the CLI.
4. Log in using username “admin” and no password.You can
now proceed with configuring your FortiGate unit.
Get started by typing “?” for a list of available commands.
Begin typing a command and type “?” for a list of available ways
to complete the command.
For example “config ?” will show the lowest level of
configuration options.
For a detailed guide visit http://forti.net/cli.
Console Port
>_
B

6
.
.
USB Port
iOS with Apple to USB Cable
FortiExplorer App
1. Download the FortiExplorer iOS App to your device from
http://apple.co/2jVvQkZ.
2. Launch the FortiExplorer App.
3. Use your Apple to USB cable to connect to the FortiGate’s
USB port. Tap on your FortiGate when it appears in the App.
4. Log in using username “admin” and no password.
5. Configure your device.
http://apple.co/2jVvQkZ
C
6

7
.
.
QuickStart Guide
Caution:
SFP transceivers are static sensitive devices. Use an ESD wrist strap or similar grounding device when handling
transceivers.
Do not install or remove SFP transceivers while fiber-optic cables are still attached. This can cause damage to the
cables, cable connectors, and the optical interfaces. It may also prevent the transceiver from latching correctly into
the socket connector.
Do not force the SFP transceivers into the cage slots. If the transceiver does not easily slide in and click into place, it
may not be aligned correctly or may be upside down. If this happens, remove the SFP transceiver, realign it or rotate it
and slide it in again.
Transmit Optical Bore
Extraction Lever
Receive Optical Bore
SFP Cage Sockets
Socket Latch
SFP Transceivers
2

8
.
.
1. Ensure that you are properly grounded.
2. Remove the cap from the SFP cage socket on the front panel of the unit.
3. Position the SFP transceiver in front of the cage socket opening and ensure that the transceiver is
correctly oriented. When the transceiver is correctly oriented, the extraction lever will be level with
the socket latch.
Note: SFP cage socket orientation may vary. Ensure that the SFP transceiver is correctly oriented
each time that you are inserting a transceiver.
4. Hold the sides of the SFP transceiver and slide it into the cage socket until it clicks into place.
Installation
A
5. Press the transceiver firmly into the cage socket with your thumb.
6. Verify that the transceiver is latched correctly by grasping the sides of the transceiver and trying
to pull it out without lowering the extraction lever.
If the transceiver cannot be removed, it is installed and latched correctly.
If the transceiver can be removed, reinsert it and press harder with your thumb.
If necessary, repeat this process until the transceiver is securely latched into the cage socket.