Foster XR415 Series User manual

English
Undercounter, Space Saver,
Prep Tables & XR415
Cabinet & Counter Models
BIT25 Controller & LCD5S Display
By Appointment to
Her Majesty Queen Elizabeth II
Suppliers of Commercial Refrigeraon
Foster Refrigerator, King’s Lynn
Foster Refrigerator
Oldmedow Road
King’s Lynn
Norfolk, PE30 4JU
United Kingdom
A division of ITW Ltd
Email:[e-mail]
www.fosterrefrigerator.co.uk
Call: [phone]
ISO 9001 ISO 14001
English
Original Operaon Instrucons
00-556435 UK November 2019 Issue 6 5

EnglishEnglish
Models Applicable to this Manual
English
Under Counters
HR150-A
HR150STB
HR200
HR200GBK
HR200STB
HR360STB
LR150-A
LR200BK
HR150G
HR150-2D
HR200BK
HR200Y
HR360
LR200
LR360
Space Savers
HR100
HR100G
HR120
HR240
LR120
LR240
XR415 Cabinets
XR415H
XR415L
XR415G
ECO Cabinets
HR410
LR410
Climate Class
Climate class is indicated on the serial plate, shows the temperature & humidity at which this appliance has
been tested, for the purposes of establishing values in line with European standards
Important Note to the Installer:
Please ensure that this document is passed to the user as it contains
important guidelines on operaon, loading, cleaning and general
maintenance and should be kept for reference.
Electrical Safety
Foster Refrigerator recommends that the equipment is electrically connected via a Residual Current Device;
such as a Residual Current Circuit Breaker (RCCB) type socket, or through a Residual Current Circuit Breaker with
Overload Protecon (RCBO) supplied circuit.
Should it be necessary to replace the fuse. The replacement fuse must be of the value stated on the serial label
for the cabinet.
General Safety
Do not store explosive substances such as aerosol cans with a ammable propellant in this appliance.
Keep all venlaon openings in the appliance or in the structure of a built in unit clear of any obstrucons.
Do not use electrical appliances inside the storage compartment.
The appliance is air ght when the door is closed therefore under no circumstances should any living body be
stored or ‘locked in’ the applicance.
The moving of the appliance should be carried out by competent personnel, ensure that two or more people
are used to guide and support the appliance, the appliance should not be moved over uneven surfaces.
The emied sound level of this appliance is 70db(A).
To ensure stability the appliance should be located on a at, level surface, correctly loaded with the castors
locked.
If the supply cord is damaged, it must be replaced by the manufacturer, it’s service agent or similarly qualied
persons in order to avoid hazards.
Care should be taken to avoid prolonged contact with cold surfaces with unprotected body parts, Correct PPE to
be used at all me.
When moving the appliance appropriate gloves should be worn, and a relevant risk assessment carried out.

English
Disposal Requirements
If not disposed of properly all refrigerators have components that can be harmful to the environment. All old
refrigerators must be disposed of by appropriately registered and licensed waste contractors, and in accordance
with naonal laws and regulaons.
Start-Up and Test Sequence
Aer unpacking, clean and allow the cabinet to stand for 60 minutes before turning on (cleaning direcons
supplied within this manual). Ensure the cabinet is situated on a rm, level surface, away from both hot and
cold air sources, as this will aect its performance.
Make sure that a minimum clearance of 50mm above and around the cabinet is available for venlaon and
eecve operaon.
Connect the unit to a suitable mains power outlet and turn the supply on. Please do not plug or unplug the unit
with wet hands. The cabinet will start automacally displaying the actual internal temperature of the unit (area
where product is stored).
As the operang temperature has been pre-set no adjustments are required. Allow the cabinet to reach its
normal operang temperature before loading with product.
Display Icons and Buons
Icons Buons
Alarm Warning Info & Set Point
Thermostat Output Acve Manual Defrost & Decrease
Fan Output Acve Increase & Manual acvaon
Defrost Output Acve Standby/Exit
2nd Parameter Set Acve

EnglishEnglish
Standby
Pressing the power switch for 5 seconds will turn the unit on or into standby. When in standby the display will
show .
Accessing the Info Menu
Press and immediately release the ‘ ’ buon then using the and buons select the data you wish to dis-
play the value of. When at the desired point press and hold the ‘ ’ buon to display the value.
Press the buon or leave the controller for 30 seconds and the unit will exit the ‘Info’ menu and resume
displaying the current temperature.
Set Point
To amend the set point press and hold the ‘ ’ buon for half a second. Then while keeping the ‘ ’ buon pressed
use the and buons to set the desired value.
When the ‘ ’ buon is released the new value will be stored automacally.
Keypad Security Sengs
This funcon avoids unauthorised controller access.
Press & release ‘ ’ then use to select ‘ ’. Press and hold ‘ ’ to change from ‘ ’ to ‘ ’. Leave for 10
seconds or briey press to resume.
Internal Light (where ed)
The on/o switch is located on the front of the light ng.
Shelves, Supports & Drawers
Shelves - ‘H’ models are supplied with sloed removable shelf supports.
The only ‘L’ models that have xed shelves that are part of the freezer system and cannot be removed are
the LR150-A & XR415L, all other ‘L’ models have removable shelves.
Refrigerated Drawers - can be removed by pulling out to their full extent and liing so that the roller passes
through the slots in the drawer runner. Please ensure drawers are ret to their original posion.
Food
Cover all foods and separate raw and cooked foods to avoid cross contaminaon.
Loading and Airow
Each shelf or drawer is capable of holding up to 25kg of product evenly distributed
Always ensure the air can circulate around/through the stored product.
It is important that for opmal energy performance that adequate airow is maintained around the perimeter
of the shelves, and around all stored products.
On all models please ensure that no product is placed on the unit base.
Door Lock (Where Fied)
To lock the door insert the key and turn 90°, turn in the opposite direcon to unlock.

English
Drawer Removal
This guide applies only to models that have drawers ed.

EnglishEnglish
Defrost
LR150 & LR410 models have stac freezer shelves and require manual defrosts. The enre stored product
should be removed and placed in a separate freezer. Switch o the mains electrical supply and leave the cabinet
door open while placing a bowl inside to catch the water as it defrosts. Once fully defrosted dry the interior of
the cabinet and switch on the mains supply.
Do not replace frozen food into the cabinet unl it reaches its normal operang temperature.
All other models are ed with a fully automac defrost system to ensure that the evaporator coil or cooling
plate remains free from ice in normal use. ‘Melt water’ is automacally evaporated using the heat from the
refrigeraon system.
Cleaning and Maintenance
Important: Before cleaning, the unit should be put into standby and then the power supply should be turned
o at the mains. Please do not plug or unplug the unit with wet hands. Only when cleaning has been completed
and the unit is dry should the cabinet be turned back on at the mains.
Suitable P.P.E (Personnel Protecve Equipment) should be worn at all mes.
Regular Maintenance:
>As and when required remove all product and shelving (beware of cold and or sharp components) from
the unit. Clean exterior and interior surfaces with mild liquid detergent, following the direcons on the
pack at all mes. Rinse surfaces with a damp cloth containing clean water. Never use wire wool, scouring
pads/powders or high alkaline cleaning agents i.e bleaches, acids and chlorines as these may cause
damage.
>Condenser Cleaning:
This should take place on a regular basis or as and when required (4 to 6 weeks) by a competent/trained
personnel.
Use a so brush or vacuum cleaner to remove dirt/dust. If there are any stubborn grease deposits le
on or through the condenser call your supplier to carry out a full service (this is normally chargeable).
Failure to maintain the condenser may invalidate the warranty of the condensing unit and cause
premature failure of the motor/compressor. Do not use a wire brush to clean the condenser. Hoover or
brush the air lter (where ed).
> All gaskets should be inspected on a regular basis and replaced if damaged. To clean, wipe with a warm
damp soapy cloth followed by a clean damp cloth. Finally thoroughly dry.
>Removable shelves and their supports can be removed for cleaning. The shelves are dishwasher safe;
however the vercal supports should be cleaned with warm soapy water then rinsed and dried.

English
Troubleshoong
Alarms/Warnings-
During normal operaon the display will show either the temperature or one of the following indicators:
Defrost In Progress Condenser High Pressure Alarm
Controller In Standby Room High Temperature Alarm
Condenser Clean Warning Room Low Temperature Alarm
Door Open Alarm Probe T1 Failure
Condenser High Temperature Alarm Keypad Locked
Generic Alarm
(Some icons or switches are only visible during adjustment, when acvated by parameters or through operaon/
manual selecon).
Before calling your supplier please make sure that:
a. The plug has not come out of the socket and the mains power supply is on i.e. is the controller
illuminated?
b. Check to see if the unit is in standby
c. The fuse for the cabinet is intact
d. The cabinet is posioned correctly – cold or warm air sources are not aecng the performance
e. The condenser is not blocked or dirty
f. The products are placed in the unit correctly
g. Defrost is not in progress or required
If the reason for the malfuncon cannot be idened, disconnect the electrical supply to the unit and contact
your supplier. When requesng a service call, please quote the model and serial number which can be found
on the silver label located on the inside of the unit (starts E......).

EnglishEnglish
Require another language?
This manual is also available for download in the following languages:
Français FR
Nederlands NL
Deutsch D
Español ES
Česky CZ
Pусский RU
Polski PO
To download please visit www.foster-spares.com and select the appropriate model of refrigerator/ freezer.

English
>Page Le Blank Intenonally <

EnglishEnglish
>Page Le Blank Intenonally <

English
>Page Le Blank Intenonally <

EnglishEnglish
UK Head Oce
Foster Refrigerator
Oldmedow Road
Kings Lynn
Norfolk
PE30 4JU
a Division of ITW (UK) Ltd
Tel: [phone]
Email: [e-mail]
Website: www.fosterrefrigerator.co.uk