Foxda Claro User manual

GF8806
第1 页共18 页
1
Claro User Guide

GF8806
2
Contents
1. GENERAL INFORMATION··········································································································3
1.1 Introduction·························································································································3
1.2 Warnings and Cautions·······································································································3
1.3 About your device················································································································4
1.4 Network services·················································································································4
2.YOUR PHONE···························································································································4
2.1 Keys and connectors ···········································································································4
2.2 Screen and operations·········································································································5
2.3 Status symbols·····················································································································5
2.4 Backlight and Keylock·········································································································6
3. GETTING STARTED···················································································································6
3.1 The first call ························································································································6
3.2 Installing the SIM Card·······································································································6
3.3 Battery and Charging··········································································································7
3.4 Turn on and off····················································································································8
3.5 Using a password················································································································8
4. NORMAL FUNCTIONS ···············································································································9
4.1 Dialing ································································································································9
4.2 Answering the call···············································································································9
4.3 Selection during the call····································································································10
5. MENUS··································································································································10
5.1 Messages···························································································································10
5.2 Call History·······················································································································11
5.3 Phonebook·························································································································12
5.4 Settings······························································································································13
5.5 Calendar····························································································
错误！未定义书签。
5.6 Adjust ································································································································14
5.7 Tools··································································································································14
5.8 Games ·······························································································································15
5.9 Menu Claro ·······················································································································15
6.APPENDIX······························································································································15

GF8806
3
1. General Information
1.1 Introduction
Thank you for purchasing this product from our company. This booklet explains the
features and functionality of this handset. Please note that from time to time our
company may upgrade the software of a product and that this may not always be
reflected in the user guide.
1.2 Warnings and Cautions
ACCESSORIES(CHARGER, BATTERIES)
Use only accessories approved by producer for use with this
particular model.The use of any other types may invalidate any
approval or warranty, and may be dangerous.Check the model
of any charger before use with this device. Make sure the
temperature of phone be maintained from -10℃to +50℃.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or when it may cause
interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your
first consideration while driving should be road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELLING
Do not use the phone at a refuelling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is in progress.
QUALIFIED SERVICE
Only qualified personnel may repair this product.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all important information
stored in your phone.

GF8806
4
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed safety instructions.
Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service.Dial 999(UK) or 112 & then press send.
Do not end the call until given permission to do so.
1.3 About your device
The wireless device described in this guide is approved for use on GSM 850 and GSM
1900 networks. Contact your service provider for more information about networks.
When using the features in this device, obey all laws and respect privacy and legitimate
rights of others. When taking and using images, obey all laws and respect local customs
as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock, the device must
be switched on. Do not switch the device on when wireless device use may cause
interference or danger
.
1.4 Network services
To use the phone you must have service from a wireless service provider. Many of the
features in this device depend on features in the wireless network to function. These
network services may not be available on all networks or you may have to make specific
arrangements with your service provider before you can utilize network services. Your
service provider may need to give you additional instructions for their use and explain
what charges will apply. Some networks may have limitations that affect how you can use
network services. For instance, some networks may not support all language dependent
characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your device may
also have been specially configured. This configuration may include changes in menu
names, menu order and icons. Contact your service provider for more information.
2. Your Phone
2.1 Keys and connectors

GF8806
5
2.2 Screen and operations
Screen displays the current status.
There are two key parts in the screen display areas：
1> Status symbols on the left and right top of the screen; they represent the signals
receiving strength and the rest capacity of battery.
2> Text and graphs in the middle of area, including numbers, texts and active
symbols.。
2.3 Status symbols
Symbols on the top：
Symbols Signification
Symbols Signification
Signals received
strength Headset mode
A new message not
read Battery capacity
Message box is full
（symbol flashing）
International
roaming

GF8806
6
Alarm Vibrate enable
Call forwarding in
no condition
Vibrate and tone
enable
Keylock mute
2.4 Backlight and Keylock
You can configure backlight through menu selection. The backlight will be shut off
automatically.
Keylock can avoid your key pressing unintentionally .
For unlocking keylock quickly, press key “Left function” then key”*“.
It will be locked automatically as long as the phone is in standby mode after a short
while.
For setting keylock, please press the following:“Left function”>”Settings”>”Phone
settings”>”Keypad Locking Settings”.You can choose “Disable”，“30 Seconds”，
“60 Seconds”。
3. Getting started
3.1 The first call
1> Insert SIM card (phone shut off). You can find the installation details in section
3.2 ”Installing the SIM Card”.
2> Charging the battery. Refer to section 3.4”Battery and Charging”.
3> Pressing “END” for approximately 5 seconds，turn on the phone.
4> Input a password if the screen says that you need to do so, then press “OK” for
confirmation.
5> Enter a PIN code if asked to do so, the PIN will normally come with the SIM Card,
then press “OK” for confirmation.
6> Enter the area code and phone number, then press “CALL”to make a call.。
Caution: You have to insert a valid SIM card and charge the battery before use
3.2 Installing the SIM Card
SIM card storage your phone numbers, PIN1, PIN2, PUK1, PUK2, IMSI, network
information, contacts data and SMS data
Caution ：
·Make sure that you insert or pull out SIM card after the phone has been shut down
for several seconds, otherwise, it may damage the SIM.
·Please insert or pull out SIM card carefully.
·Keep all SIM cards out of the reach of small children.

GF8806
7
Steps：
1> Press and hold “End” to shut off phone,remove the back cover of the phone, remove the
battery by lifting at the base of the phone。
2> Insert the SIM card smoothly, so that the bevelled corner is on the upper right side.
3> Insert the battery into the battery slot. Align the back cover with the back of the phone and
slide it upwards. Push the back cover up to the top of the phone to lock it.。
Cautions ：
·If the SIM is in a wrong way or the SIM is damaged, the screen will have the following
message “Insert SIM Card” after turn on the phone. Please check the SIM status by
shutting off phone.
·For availability and information on using SIM card services, contact your network operator
3.3 Battery and Charging
Connect the charger to an AC wall socket. If the battery is completely discharged, it
may take a few minutes before the charging indicator appears on the display or
before any calls can be made.
Connect the lead from the charger to the socket on the bottom of your phone. The
charging time depends on the charger and the battery used. When you disconnect
the power cord, grasp and pull the plug, not the cord.
Specification of socket
Warning: Use only batteries, chargers, and accessories approved by our company

GF8806
8
for use with this particular model.The use of any other types may invalidate any approval
or warranty, and may be dangerous.Check the model of any charger before use with this
device.
3.4 Turn on and off
Press and hold the “End” key to turn the phone on.If the phone asks for a PIN or
security code, enter the code supplied with your SIM card (displayed as ****), and
press key“OK”.
Press and hold the “End” key to turn off when the phone is power on.
Warning: Do not switch the phone on when use of a mobile is prohibited or when it
may cause interference or danger.
3.5 Using a password
You can set several types password by accessing the menu “Settings”>”Security
settings”. Here you can choose “Power on PIN1”,”Change PIN2”and “Phone
Code”
Phone Code
Phone Code is offered by our company.The default password is 0000. It protects
your phone from unauthorised use. If “Phone Code”is available, you need to enter
the password when the phone is turned on.
PIN Code
PIN Code (4~8bits) is to avoid unauthorised use of your SIM card. The PIN code
comes with the SIM Card from your network operator. If the PIN code is activated,
you have to enter it whenever the phone is switched on. If you insert the wrong code
3 times, the SIM card will be locked. The unlock way is shown below:
1> Insert correct PUK Code follow the tips.
2> Then insert the new PIN Code, and press “OK”.
3> Insert the new PIN Code again for confirmation.
4> If PUK Code is correct, SIM Card will be unlocked. PIN Code will be reset.
Warning ： PUK Code will be available from your network operators.
PUK Code
PUK Code（PIN Code unlock code，8bits）is for unlocking the pin code.If you insert
the wrong PUK Code 10 times, the SIM will be disabled. You will need to get a
replacement SIM from your network operator.
PIN2 Code
PIN2 Code may be offered by your network operator. It support several functions
such as “Calling fee calculation”. Please contact your network operator for more
information. If you insert the wrong PIN2 code 3 times, PIN2 code will be locked.
Only inserting correct PUK2 code can unlock PIN2：
1> Insert correct PUK2 Code follow the tips
2> Then insert the new PIN2 Code, and press “OK”.

GF8806
9
3> Insert the new PIN Code again for confirmation.
PUK2 Code
PUK2 Code（PIN2 code unlock code，8bits）is for unlocking pin2 code. If you insert
the wrong PUK2 Code 10 times, the SIM Card will be disabled. You will need to get
a new SIM Card from your network operators.
Forbidding password
It will be needed while using Call Barring. You can get this code from network
operator when you apply this function.
4. Normal functions
4.1 Dialing
There are several ways to make a call:
In Standby screen, key on area code + phone number, press the “Call” key.
Check the number from Dial record and press the “Call” key.
Find a number from “Phonebook” and press the “Call” key.
International Dialing
Press key” * ”twice continually，symbol“+” comes out on the screen。Then input the
countrycode, area code, phone number and press the “Call” key
Dial Ext.
Key in the telephone exchange number, press key”+” 3 time to bring up a “p” symbol
and then input the extend number。
Correct the wrong input
Press key”Right Function” to delete the last character.
Dailing a number from “Phonebook”：
1> Find the number you want to dial from “Phonebook”.To search: Press the first
character of the names, then press key “UP” or “Down” to fine the contact.
2> Press key “CALL”.
Redial
1> In Standby mode, press key “CALL”to display calling list.
2> Press key “UP” or “DOWN” to select the number you want to dial.
3> Press key ”CALL”
Speed dials
1> In Standby mode, press key ”Left Function”> ”Phonebook”> ”Speed dials”, you
can edit the number list here.
2> In Standby mode, you can press and hold number keys”2” to “9”to speed dial.
4.2 Answering the call
1> The phone will ring or vibrate when a call is coming. (It depends on your Profiles).
2> Press key “Call”or key “Left function”>”Accept”to pick up the call.
3> To end the call, press the ”END” key.
4> To reject the call, press the ”END” or key “Right function”.
Cautions:

GF8806
10
The call number is displayed on the screen if it can be recognised.
4.3 Selection during the call
Call waiting
If the network support this function and you register it, you will hear a call waiting
sound when you are making a call.
1> Press key “CALL” or key “LEFT Function”>”Accept” to answer a call, the first call
will be hold on automatically. Refer to “Hold / Switch”
2> Press “RIGHT Function” or “END” reject new coming call.
3> Press key “UP” or “DOWN” to choose the current call , press key “LEFT
Function”>”Disconnect” to end up the call.
Hold / Switch
When there is two calls connected
1> Press the “RIGHT Function” key to switch and to place the current call to hold on,
and make the other to be unhold.
2> Press the ”END” key to hang up one line, you can choose which line to hang up by
pressing the navigation keys.,press the “END” key to hang up current calling.
3> Pressing the “LEFT Function” key can hang up all calls, including current and
holding calls.
Call holding
If network support this function, you can start a call when you in another call:
1> Press number keys and make a call. Then dial another number and press “CALL” to
make the second call.
2> The first call will be held automatically.
Mute
This function switches on/off the microphone of phone or other connected
microphones.
Press the ”LEFT Function” key >”Mute”/”Unmute” during a call.
Other options in calling
You can go back to the main menu to enter “Phonebook”,”Messages”etc.
5. Menus
You can find every function through “Menus” by press key “LEFT Function”.
Press key “END” returns you to the Standby mode.
5.1 Messages
5.1.1 Creating a message
Note: Each text can only be up to a maximum of 459 characters. Any additional parts of
the text will be carried over into another text. In the right hand corner of the screen,
you can find the number of characters and current section sequence of the message.
For example: 70/1
Steps:
1> Press key” LEFT Function”>”Messages”>”Create message”
2> Insert name, number and template text while editing the message.