Foxpro SNOW COMMANDO User manual

2
Important Information
FOXPRO®’s goal is to provide our customers with the highest quality products in the
industry. We take great pride in manufacturing our products in the USA. Please do not
hesitate to contact us for assistance, comments or questions.
FOXPRO®Inc.
14 Fox Hollow Drive
Lewistown, PA 17044
Hours of Operation
Monday –Friday
8AM –5PM EST
Contact Us
Service & Support: 717-248-2507
Toll Free Orders Only: 866-463-6977
General Inquiry E-mail: [e-mail]
Technical Support: techsup[email protected]
Stay up to date with the latest sounds, products and videos on Facebook:
https://www.facebook.com/Foxpro.Furtakers
This manual, the animal sounds stored in your caller, and animal sounds purchased from FOXPRO®Inc. for
installation in your caller are protected by copyright.
Copyright ©℗ 2019 by FOXPRO®Inc.
Publication Date: January 20, 2022 –REV1.1

3
Table of Contents
Getting Started.................................................................................................4
1-1Snow Commando Overview......................................................................4
1-2TX433 Transmitter Overview.....................................................................5
Operating Manual............................................................................................5
2-1 What’s Included ........................................................................................5
2-2 Snow Commando Requirements ..............................................................5
2-3 TX433 Requirements.................................................................................6
2-4 Playing Sounds ..........................................................................................6
2-5 Favorites....................................................................................................7
Using External Speakers...................................................................................8
TX433 Transmitter Detailed Information.........................................................8
5-1Primary Display Area .................................................................................8
5-2Main Menu ................................................................................................8
5-3Sound Settings: Volume Step ....................................................................8
5-4Sound Settings: Play Mode........................................................................8
5-5Sound Settings: Fav Mute OR....................................................................8
5-6Display/Power: Backlight...........................................................................9
5-7Display/Power: Bklt T.O.............................................................................9
5-8Display/Power: Contrast............................................................................9
5-9Display/Power: LCD Mode.........................................................................9
5-10 Display/Power: Auto Off .....................................................................9
5-11 Timer/User: Stand Tmr........................................................................9
5-12 Timer/User: Alarm.............................................................................10
5-13 Timer/User: USER 1 & USER 2...........................................................10
5-14 Remote Settings: Download List .......................................................10
5-15 Remote Settings: View ......................................................................10
5-16 Remote Settings: Snd Nums..............................................................10
5-17 Remote Settings: About Info.............................................................10
5-18 Remote Settings: Cable Detect .........................................................10
Programming the Snow Commando..............................................................10
6-1Obtaining New FOXPRO Sounds..............................................................11
6-2Programming the Snow Commando .......................................................11
6-3Updating the Transmitter Playlist ...........................................................13
Maximizing Remote Range ............................................................................13

4
Product Care & Maintenance ........................................................................14
Troubleshooting.............................................................................................14
FCC & IC Information .....................................................................................14
Warranty Statement .............................................................................15
Getting Started
Congratulations on your purchase of the FOXPRO Snow Commando digital game call! To avoid personal
injury and product damage, be sure to read all operating instructions before using the FOXPRO Snow
Commando.
1-1 Snow Commando Overview
The following graphic highlights the functions and details of the Snow Commando digital game call:
1
Power On/Off Switch
2
LED Pilot Light
3
External Speaker Jack
4
Battery Pouch
5
Sound Upload Jack
6
Mini USB Port

5
1-2 TX433 Transmitter Overview
The following graphic highlights the functions and details of the Snow Commando TX433 transmitter:
1
Power on/off
2
Play/select
3
Volume up/down
4
User 1
5
Lanyard loop
6
Mute
7
User 2
8
Scroll up/down
9
Menu/back
10
Elapsed timer
11
Sounds/categories
12
Volume level
13
Mute status indicator
14
Battery indicator
15
Telescopic antenna
16
Sound upload jack
Operating Manual
The Operating Manual explains how to use
the Snow Commando Digital Game Call. We
strongly suggest reading the manual in its
entirety to fully understand all of the features
and get the most of your new product.
2-1 What’s Included
A. Snow Commando Digital Game Call
B. Snow Commando TX433 Transmitter
C. 11.1V Lithium-Ion Battery Pack and 120VAC Wall Charger
D. 3.5mm Male Stereo to Stereo Sound Upload Cable
E. Warranty Form
2-2 Snow Commando Requirements
Because the Snow Commando will play at such high volumes, a Lithium-Ion battery pack and charger are
included in the package. This style of battery will offer exceptional run times, even in temperatures below
freezing.
Charging the Battery Pack
1. Plug the wall charger into a standard wall outlet (up to 240VAC 50/60Hz).
2. Connect the other end to the battery pack with the white, plastic connectors.
3. Plug the two metal connectors together that will attach the adapter to the charger.
4. Upon connecting the charger, the LED on the charger will glow red, indicating that the charging
process is occurring. When the charge is complete, the LED will turn green.
WARNINGS AND GENERAL PRECAUTIONS FOR CHARGING
•For maximum charge efficiency, we recommend charging the
battery in temperatures ranging from 40°F to 85°F (5°C to 30°C).
•Do not leave charging batteries unattended

6
•Remove the battery pack from the Snow Commando when it will
not be used for prolonged periods of time
•Recharge your battery pack periodically
Installing the battery pack in the Snow Commando
1. Open the battery pouch on the side of the caller and slip the battery pack inside. Make sure to
orient the pack so the attached wire will come out of the top of the pouch.
2. Connect the power supply wire on the side of the caller to the wire on the battery pack.
3. To verify that you have power: Flip the power switch to the “on” position. The pilot LED should
illuminate green, indicating that the Snow Commando is powered on. If the LED does not
illuminate, verify that your battery pack is charged and double-check the connections. The LED
may flicker for a period of time before glowing solid when the Snow Commando is initially
powered on. This is normal. If the LED begins blinking during operation, it indicates the batteries
are low and need replaced.
IMPORTANT NOTE
The Snow Commando comes with a battery protection circuit that keep the
battery from being damaged from deep discharge. This circuit only activates
when the battery is completely exhausted.
2-3 TX433 Requirements
The TX433 remote control operates on a single 9V battery (not included). It is recommended that you use a
high-quality lithium or alkaline battery for the best performance.
Installing a Battery in the TX433 Transmitter
1. Access the battery compartment by removing the battery compartment door from the back of
the TX433. The door slides down and off the remote.
2. Insert the 9V battery in the back of the remote.
3. Slide the battery compartment door back onto the remote.
4. Push and hold the power button on the TX433 for approximately 1-2 seconds to power it on. The
LCD will activate and display the primary screen.
2-4 Playing Sounds
The primary function of your Snow Commando game call is to produce sounds to attract wildlife. This
section explains how to turn on the Snow Commando and the TX433 and how to start playing sounds.
IMPORTANT NOTE
The Snow Commando transmitter is not intended to operate the caller at
distances shorter than 1 meter (3 feet). If the transmitter is located too close
to the caller, proper operation cannot be ensured.
1. Turn on the Snow Commando by moving the power switch to the on position. When powered
on, the Snow Commando pilot light illuminates green, indicating that it is powered on. If the light
does not activate, charge the battery pack and try again.
2. Turn on the TX433 transmitter by pushing and holding the power button for approximately 1-2
seconds.
3. Notice the black horizontal highlight bar on the TX433 display. The bar moves up and down the
screen as you use the “Scroll Up”or “Scroll Down”arrow buttons.
4. Move the highlight bar to one of the sound categories and push the “Select” button. Doing this
results in displaying all of the sounds in that particular category. To exit the current category,
push the “Back/Menu” button.

7
5. After moving the highlight bar to the sound you wish to play, push the “Select” button a single
time to begin playback. Your selected sound will begin playing at low volume.
6. To adjust the volume: Use the “Volume Up”button to raise the volume level to your desired
setting. Use the “Volume Down” button to decrease the volume level. The transmitter has 20
volume steps.
7. To silence the sound: Push the “Mute” button a single time. When muted, the mute status
indicator on the TX433 display shows an “M” and the current sound is silenced. Un-muting is
accomplished by pushing the “Mute” button a second time (the “M” will no longer be displayed
and the sound will resume playing).
8. To switch sounds: Use the scroll buttons to navigate to a different sound and push the “Select”
button. You can switch sounds while the Snow Commando is actively playing a sound or while
muted.
9. To turn off the TX433: Push and hold the power button for approximately 1-2 seconds. Be aware
that turning off the remote control does not end sound playback on the Snow Commando. If you
are finished calling, use the “Mute” button to silence the Snow Commando prior to turning off
the TX433.
10. To turn off the Snow Commando: Flip the power switch to the off position. The pilot LED will
extinguish.
2-5 Favorites
The TX433 allows you to establish a list consisting of 10 of your most frequently used sounds under the
“Favorites” menu. These “Favorites” allow for quick selection of your favorite sounds at your
predetermined volume level. This section describes the process involved in creating, changing, and using
your presets.
Creating New Favorites
1. Select the “Favorites” menu item on the TX433. If this is your first time working with favorites,
favorite 1 is automatically set to Coyote Pup Distress 3 at volume 10.
2. To set a preset, position the black highlight bar on one of the blank preset slots and push the
“Select” button a single time.
3. The first step is selecting the sound you wish to use. Use “Sound Up” or “Sound Down” buttons
to navigate through your sound list and locate the desired sound. Once found, push the “Select”
button to set the sound.
4. Next, select the volume level that you wish to use for this favorite. This is done by using the
“Volume Up” or “Volume Down” arrow button. After you have found your desired volume level,
push the “Select” button to set the volume level. This will complete setting up your Favorite.
5. You will notice that the slot you assigned this favorite to now displays the sound name and the
volume level for reference.
Changing/Overwriting Existing Favorite
1. Select the “Favorites” menu item on the TX433.
2. Position the highlight bar on the favorite that you wish to change.
3. Push and hold the “Select” button for about 3-4 seconds. Repeat the steps for Creating a New
Favorite.
Using a Favorite
1. Select the “Favorites” menu item on the TX433.
2. Position the highlight bar on the preset that you wish to activate.
3. Push the “Select” button a single time to begin playback. The Snow Commando will begin playing
the selected sound at the preset volume level.

8
Using External Speakers
The Snow Commando is equipped with an external speaker jack which allows you to connect an additional
speaker. By connecting a second speaker to the Snow Commando, you can direct the sound to a wider area,
increasing your chances of having an animal hear it. You can find a complete selection of external speakers
on the FOXPRO website. The external speaker jack on your Snow Commando accepts a standard ¼” plug.
When selecting an external speaker, be sure to use one with an impedance rating of 8-ohms. Be sure the
Snow Commando is turned OFF before connecting an external speaker! To connect an external speaker,
plug the connector of the external speaker into the external speaker jack on the side of the Snow
Commando.
TX433 Transmitter Detailed Information
This section covers the TX433 in detail including breakdowns and explanations of each menu item.
5-1 Primary Display Area
When powered on, the TX433 briefly displays a
startup screen (firmware version) and then goes
straight to the primary display area (see image to
the right). The “Favorites” menu item holds your
10 favorite sounds. Below “Favorites” are your
various sound categories. The bottom line of the
display is a status bar that shows (in order):
current volume level, mute status, battery level,
and elapsed timer. You navigate through the
screen with the “Scroll Up” and “Scroll Down”
buttons. As you scroll, the black highlight bar moves up and down, respectively. To select a menu item, push
the “Select” button. To move back to the previous screen after making a selection, use the “Back/Menu”
button.
5-2 Main Menu
The main menu provides access to a variety of transmitter configurations. To access the main menu, push
the “Back/Menu” button a single time. The available menu options are as follows: “Sound Settings,”
“Display/Power,” “Timer/User,” and “Remote Settings.” The following sections cover each of these menu
items and their sub-menu items in detail.
5-3 Sound Settings: Volume Step
The TX433 has a range of volume steps from 0 –20. Increasing the volume in the field by increments of 1
may be too slow for some, therefore, this stepping value is configurable. You can choose from 1, 2, and 3.
To change the volume step value, highlight the “Volume Step” menu item, push the “Select” button, then
use the “Sound Up” or “Sound Down” scroll buttons to cycle through the options. When the desired option
is set, push “Select” a final time to lock it in. The value assigned to the Volume Step option will be
remembered between power cycles.
5-4 Sound Settings: Play Mode
This menu allows you to specify which mode of sound playback the Snow Commando operates on. The
available options are: repeat, single play, and jukebox. The default setting is repeat. In Repeat mode, the
Snow Commando will play the selected sound repeatedly until you interrupt it. In Single play mode the
sound will play a single time, then stop. In Jukebox mode the sounds play a single time, incrementally. The
Play Mode setting is NOT stored between power cycles. You will need to change this setting each time you
power on the Snow Commando remote.
5-5 Sound Settings: Fav Mute OR
During normal operation, if the Snow Commando is muted and you request to play a favorite, the sound is
queued for playback, but it cannot be heard until the caller is un-muted. Favorite mute override will take

9
care of this and eliminate the need for un-muting the sound upon preset activation. It works by initially
checking to see if mute is active and, if it is, un-mute the Snow Commando prior to initiating playback of the
sound. Turning on favorite mute override can be done by accessing Sound Settings, highlighting the “Fav
Mute OR” menu item, pushing “Select”, then using the “Sound Up” or “Sound Down” to toggle between off
and on. Push “Select” a final time to set it. This setting is remembered between power cycles.
5-6 Display/Power: Backlight
This setting allows you to change the intensity of the backlight in a range from 5% - 100%. The lower the
intensity, the better your battery life will be. To adjust this setting, highlight the Backlight menu option,
push the “Select” button, and then use the “Sound Up” or “Sound Down” scroll buttons to cycle through the
values. When you have selected the desired backlight intensity, push the “Select” button a final time to set
it. This setting is remembered between power cycles.
5-7 Display/Power: Bklt T.O.
This setting allows you to set the duration for the backlight timeout. The backlight illuminates every time a
button is pressed. If the backlight is illuminated and you do not push a button within the set period of time,
the backlight will automatically shut off. Available values are 15 seconds, 30 seconds, and 1 minute. Keeping
this at a lower value will help promote maximum battery life. To adjust this setting, highlight the Backlight
T.O. menu option, push the “Select” button, and then use the “Scroll Up” or “Scroll Down” scroll buttons to
cycle through the values. When you have selected the desired backlight timeout period, push the “Select”
button a final time to set it. This setting is remembered between power cycles.
5-8 Display/Power: Contrast
This setting allows you to adjust the screen contrast. In ‘normal’ display mode (see 5-9 Display/Power: LCD
Mode), the higher the value, the darker the text will appear. In ‘inverse’ display mode, the higher the value,
the darker the background will appear. To change this value, highlight the contrast menu item, push the
“Select” button, then use the “Scroll Up” or “Scroll Down” buttons to cycle through the values. When you
have selected the desired contrast setting, push “Select” a final time to set it. This setting is remembered
between power cycles.
5-9 Display/Power: LCD Mode
This setting allows you to set the desired display mode. Available options include normal and inverse. In
normal mode, the text will appear as black and the background will be light. In inverse mode, the
background will be black with light text. To change this value, highlight the LCD Mode menu item, push the
“Select” button, then use the “Scroll Up” or “Scroll Down” buttons to cycle through the available options.
When you have selected the desired LCD Mode, push the “Select” button a final time to set it. This setting is
remembered between power cycles.
5-10 Display/Power: Auto Off
If you do not push a button on the remote for a set amount of time, the remote will automatically power
down to conserve battery life. The available options for this setting include 30 minutes, 45 minutes, 1 hour,
2 hours, and 4 hours. To change this value, highlight the Auto Off menu item, push the “Select” button, then
use the “Scroll Up” or “Scroll Down” buttons to cycle through the available options. When you have
selected the desired auto off period, push the “Select” button a final time to set it. This setting is
remembered between power cycles.
5-11 Timer/User: Stand Tmr
The elapsed timer (located on the bottom right of the display) allows you to see how long you have been on
a stand. The timer starts as soon as you turn on the Snow Commando transmitter. You can reset the timer
by accessing the Main Menu, selecting Timer/User option, and then selecting the “Stand Timer Reset.” The
timer will automatically reset to 00:00 if it is allowed to continue beyond 99:59.

10
5-12 Timer/User: Alarm
The Snow Commando remote features a visual alarm that can be set to go off after a span of time. The
available times are represented in minutes: 1 –15 (individual steps) and 20-60 (steps of 5). When the alarm
is set and the configured time span passes, the stand timer (or clock if set to display the clock) will display a
confirmation message and the timer indicator will begin to flash. To set an alarm, select the “Alarm
(minutes)” menu item, push the “Select” button, and then use the “Scroll Up” or “Scroll Down” buttons to
find the desired time value. When the desired time value is selected, push the “Select” button to set the
alarm.
5-13 Timer/User: USER 1 & USER 2
User button 1 and 2 can be assigned a function of your choice for quick one-button access. You can choose
from: Favorite 1, Favorite 2, Favorite 3, AUX, Recall, Timer reset, and Backlight. To set this, highlight the
“USER 1” or “USER 2” menu item, push the “Select” button, then use the “Scroll Up” or “Scroll Down”
buttons to cycle through the options. When the desired option has been set, push “Select” a final time to
set it. These settings are remembered between power cycles.
5-14 Remote Settings: Download List
Any time you reprogram the Snow Commando to add new sounds or rearrange existing sounds, you must
download a new copy of the play list to the transmitter. This menu item will guide you through that process.
In order to download the playlist, you will need a 3.5mm stereo male-to-male cable (included). See section
6-3 for more information.
5-15 Remote Settings: View
The TX433 can display your sounds either by general numerical listing or by category listing. Sound
categories are the easiest to navigate if you have a large number of sounds. The TX433 supports up to 25
unique categories. To configure the view setting, highlight the “View” menu item, push the “Select” button,
and then use the “Scroll Up” or “Scroll Down” buttons to cycle through the options. When the appropriate
setting is selected, push the “Select” button to set it. This setting is remembered between power cycles.
5-16 Remote Settings: Snd Nums
The TX433 displays your sound list in a numerical format based upon the index value of each sound file. The
sounds are numbered from 000 –299. You can choose to either have the index values visible in your sound
list or you can hide them. The advantage of hiding the numbers is that the sound names might be easier to
read. The options for this setting are “Show” and “Hide.” To toggle the options, highlight “Snd Nums” in the
menu, push the “Select” button, use the “Scroll Up” or “Scroll Down” button to cycle the options, then push
“Select” to set it. This setting is remembered between power cycles.
5-17 Remote Settings: About Info
The About Info screen displays a variety of information pertaining to version number, number of sounds
loaded, number of favorites, and transmitter health.
5-18 Remote Settings: Cable Detect
If cable detect is turned on, the transmitter will automatically prompt you to perform the download list
function when a 3.5mm stereo cable is connected to the sound upload jack. You can manually initiate the
download list process, if you prefer, by disabling this feature.
Programming the Snow Commando
The Snow Commando can store up to 300 sounds in total. From the factory, it’s loaded with 75 premium
sounds along with all current free sounds. All free sounds are prefixed with “F_” for easy recognition. The
main difference between premium sounds and free sounds is the premium sounds are all live animal
recordings whereas the free sounds contain both manmade and real sounds. The Snow Commando is
capable of using FOXPRO’s proprietary audio file type (FXP), MP3, and uncompressed WAV files.

11
Programming the Snow Commando can be done with a PC or Mac computer, or by sending the Snow
Commando to the factory. In order to program the Snow Commando from home, you will need a USB mini
A/B cable (not included with the Snow Commando) and a computer running one of the following operating
systems: Windows XP, Vista, 7, 8, 8.1, Windows 10, or Mac OS X 10.7.3 or newer.
6-1 Obtaining New FOXPRO Sounds
Access the FOXPRO website to purchase new sounds or download new free sounds. The website is located
at: http://www.gofoxpro.com. You can purchase 1 sound of your choice, 4 sounds of your choice, 8 sounds
of your choice, 16 sounds of your choice, or you can choose to download free sounds. To purchase and
download new sounds, click on the desired sound pack choice and work through the ordering steps. At the
end of the process, you will be able to save your sound pack to the computer. To download free sounds,
please visit: http://www.gofoxpro.com/free.
To download sounds that you have purchased, access the FOXPRO website and login to your store account.
Click the “My Account” menu and click on “Sound Pack Download Manager.” Locate the sound pack you
wish to download and click the “Download” button. Note that, you will be saving a compressed zip archive
file that bundles all of the sounds together (you can opt to download the sounds individually if you have a
slow internet connection). The new sounds can then be programmed into the Snow Commando by using
the FOXPRO Sound Programming Utility, which is covered in the next section.
6-2 Programming the Snow Commando
The FOXPRO Sound Programming Utility has versions available for both Windows and Mac operating
systems. You can find them both at the following link:
https://www.gofoxpro.com/programming
Under the heading “Software Links”, you should see a link for the Windows and Mac versions. Click on the
appropriate link for your operating system to go to the download page.
Windows users will see that there is both a 32-bit and 64-bit version of the utility available. The 64-bit
version should work fine on most modern computers. If your computer is a little on the older side, you will
want to use the 32-bit version. To download the installer (executable .exe file), click on the link
corresponding with the correct version. After doing that, the installer file will be saved to your computer.
You must now open that file to allow the installer to setup the utility on your computer. We recommended
keeping all of the default options as they are. You will have the ability to create a Desktop icon if you wish.
When installation is complete, the utility can be located in your Start Menu > FOXPRO Programmer.
Mac users can download a Mac Application Bundle for the utility. This is a bundle that contains the utility
and provides the easiest method for installation. Simply download the bundle and then move it into your
Applications folder. Note that, depending upon your security settings, you may need to add an exception
for the file after you have it downloaded.
Connecting your Snow Commando to the PC
The USB port is located inside the rear cap on the Snow Commando. To access this compartment, you will
have to remove the 4 screws that connect the rear cap to the speaker. This will require a Phillip’s head
screwdriver. (NOTE: DO NOT OVERTIGHTEN THE SCREWS WHEN REINSTALLING THE COVER, AS IT CAN
DAMAGE THE SPEAKER HOUSING). Once you have removed the cap, connect your USB cable between the
USB port in the Snow Commando and a USB port on your computer. Make sure the Snow Commando is
powered off while it is connected to your computer! After connecting the Snow Commando to your
computer, launch the utility. The utility should recognize the device and display the sounds currently
installed in the Snow Commando in the “Caller Sound Files” column on the right. If this is your first time
using the utility, the “Source Sound Files” column on the left will be empty.

12
Launching the Utility
Windows users can launch the utility by finding the shortcut in the Start Menu and clicking on it. For those
who created a Desktop icon, locate it and double-click on it to launch the utility.
Mac users can double-click on the icon for the bundle that you placed in your Applications folder earlier.
As the utility launches, you will see a splash screen that shows some basic information. When it is fully
loaded, you will be presented with a screen that is divided into two main sections. The left side is
called Source Files, which represents the default storage location for sounds on your computer. The right
side is called Caller Files, which displays the sounds loaded in your game call. Because we already connected
the game call to the computer previously, the Caller Files section should be displaying the sound list for your
game call. If this is your first time using the utility, the Source Files column should be empty.
File Locations / Sound Library
Whether using Windows or Mac versions, the utility establishes the local sound storage point under
Documents > FOXPRO > Sounds. We recommend that you place all of your new sounds in this location for
easy access.
For purposes of example, we can quickly add some new sounds from the free library with the utility. To do
this, click on the File menu on the utility screen and then click on the “Download Free Sounds” menu item.
This displays a list of all free sounds available from FOXPRO. You can select one or all of the free sounds to
highlight them. Next, click on the “Download Selected” button to save the selected files to your computer.
If you have already purchased new sounds from FOXPRO, be aware that you can login to your store account
and download the new sounds directly in the utility. To do this, click on the File menu and then click on the
“Sound Pack Downloader” menu item. Enter the email address for your store account along with the
account password, then click on the “Login” button. Upon logging in, any sound pack that you have
purchased through the online store will appear in the column on the right. Simply click on one of the sound
packs to select it and then click the “Download Selected” button to save the files to your computer. When
the download is complete, the sounds will appear in the Source Files column.
Installing New Sounds
Now that you have downloaded sounds in the previous step, you can easily add them into your game call.
The game call should already be connected to your computer and the Caller Files column should show the
sounds currently loaded into the unit. The left, or Source Files column, should be displaying the sounds we
previously downloaded. On the Caller Files column, scroll down to the end of your sound list and locate the
first available sound slot. Click on it a single time so that it becomes highlighted. On the Source Files column,
you can click on a single file or all of the files to highlight them. Next, click on the “Insert Sound(s)” button
the center of the screen. The sounds that were highlighted on the Source Files column will now be displayed
in the Caller Files column and will also now be installed into your game call.
After you have added new sounds into your game call, you will need to edit the categories to get the new
sounds to display properly. The steps for that process can be found in the next section.
Editing the Categories within in the Utility
With the game call connected to your computer, launch the utility as described in section 11-5. Under the
Caller Files column, locate and click on the button called “Edit Categories”.
The screen is split into two distinct panes. The left pane displays all of the sounds that are stored in your
FOXPRO game call. The column to the right displays how the categories are arranged. You will notice that
each category name features a list of sounds indented just beneath it. This represents the sounds that are in
each category.
To add a new sound into the correct category, first locate the sound on the column to the left. It should be
near the end of the list. After you have located it, click on it one time to highlight it. Next, locate the

13
appropriate category on the right that you want to place that sound into. Click on the category name to
highlight it. To place the sound into that category, click on the “Insert Selected” button in the middle of the
screen. You should now see the new sound appearing under the category name selected on the right.
When finished, click on the “Save & Exit” button to commit the changes to the categories. To finish
programming, you will now need to update the playlist on your remote which is covered in the next section.
6-3 Updating the Transmitter Playlist
You will need a 3.5mm male-to-male stereo cable for this process. This cable is included with the Snow
Commando when purchased.
1. Disconnect the Snow Commando from your computer if it is still connected.
2. Disconnect all accessories from the Snow Commando (i.e. external speaker) and make sure that
it is turned off.
3. Turn on the TX433 transmitter.
4. Connect one end of the 3.5mm cable to the sound upload jack on the top of the TX433. You will
see a message displayed on the screen stating, “Turn caller off. Connect to AUX jack on call.”
5. Connect the other end of the 3.5mm cable to the AUX jack on the Snow Commando game call.
Select “OK” on the TX433.
6. Power on the Snow Commando to initiate the transfer process. The display on the remote
updates as the transfer progresses. It displays the number of sounds transferred. When
complete, the screen returns to the normal view. If there is an error in the programming, the
transfer will fail. If that occurs, you will need to connect the Snow Commando to your computer
and review the programming for errors. Watch for duplicate sound numbers or missing numbers.
7. When the transfer completes, unplug the cable from the transmitter and Snow Commando.
Browse through the sound list to view the changes.
Maximizing Remote Range
Remote range can be affected by many factors. Some of these factors can be controlled while others
cannot. In order to achieve the best possible remote range with your Snow Commando digital game call
system, it is recommended that the following points be observed:
•Fully extend the telescopic antenna on the TX433 remote control.
•Always use a high-quality alkaline or lithium battery in the remote.
•Always maintain clear line of sight between the remote control and the Snow Commando. Any
obstructions—no matter how significant or insignificant—can adversely affect the radio signal.
•Keep the remote control a minimum of six inches away from your body, gun barrel, and metal
shooting sticks as these things can detune the remote control.
•Hold the remote control vertically with the antenna pointing skyward (see image below):
•Avoid using the device remotely when you are near power lines, cellular phone towers, and
radar (such as near airports or military installations).
•Try to elevate the caller off of the ground by approximately three feet. This can greatly maximize
your overall remote control range.
•Try to avoid situations where the Snow Commando is placed at a lower elevation than the
remote control—the caller should always be higher.

14
Product Care & Maintenance
Avoid exposure to all precipitation and moisture. Moisture (perhaps from rain, snow, condensation, or
other) can potentially enter the unit or the battery compartment and cause serious problems. Proper care
should be taken to mitigate the introduction of moisture into the machine and make sure that no moisture
is present during storage. Moisture can quickly lead to corrosion, electrical shorts, and even rust—all of
which can render the unit damaged and out of warranty. This type of damage is preventable! If you are
operating in rainy, wet conditions, it is recommended that you place the unit inside of a large plastic storage
bag or use a water/weatherproof deployment bag to keep water from getting to it. When storing the unit
for prolonged periods, be sure that you keep it in a dry location. Remove batteries prior to storage or
extended periods of inactivity! All batteries, whether alkaline or rechargeable, should be removed from the
game calls, decoys, and transmitters prior to storage or periods of inactivity. Batteries left inside of
electronic devices can leak over time. Damages caused by this can be severe and potentially destroy the
electrical components. To prevent this from happening, simply remove all batteries from all devices before
you put them away. Keep in mind: damage caused by battery leakage is not covered under warranty.
Troubleshooting
PROBLEM
SOLUTION
Snow Commando will Not Turn On
Make sure your battery pack is fully charged
Snow Commando does not produce any
sound
Check that the speaker is turned on. The LED Pilot Light will be
green if the caller is powered on.
Cannot transfer sound list to Snow
Commando transmitter
This typically stems from an error in the play list in the Snow
Commando. If you recently added new sounds, double-check
the programming for errors such as duplicate or missing sound
numbers.
Snow Commando transmitter does not
turn on
Install a fresh battery and try again
Snow Commando not being recognized
by computer
Make sure that the Snow Commando is turned OFF while
connected to the computer.
Pilot light / LED is blinking
This is the low battery indicator. Recharge your battery pack.
Pilot light blinks 5 times and then turns
off
Problem detected with the memory card. Contact support.
FCC & IC Information
RF Exposure Safety Notice
The Snow Commando transmitter is not intended to be operated closer than 20cm (about 8 inches) to your body. The
transmitter can produce a radiated RF field similar to that of a standard cell telephone, although the duty cycle of this RF
field is much lower than that of a cell telephone. Using the transmitter closer than 8 inches to your body can increase your
exposure to RF energy levels thought by some to be harmful. Additionally, operation in close proximity to your body can
detune the antenna causing a decrease in operating performance.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF
exposure compliance.
FCC Information
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
correct the interference by one or more of the following measures:

15
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet or circuit different that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation of this device.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under
FCC rules.
Industry Canada Notice
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesirable operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouilage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le functionnement.
Note: Units exported beyond the boundaries of North America are not FCC certified. FOXPRO Inc. makes every attempt at
complying with regional regulations governing radio spectrum. However, it is the user’s responsibility to ensure compliance
with local laws and ordinances that govern the use of radio controlled devices in the area of operation.
Warranty Statement
Your FOXPRO® game call is warranted to be free from defects in materials and workmanship that diminish
its usefulness for a period of time as established for 3 years from the date of purchase if the item was
purchased from a FOXPRO Authorized Retailer. Return the unit prepaid and packaged securely along with
proof of purchase to FOXPRO. Include a note describing the defect or problem. This limited warranty is void
if the unit is physically damaged, used in a manner contrary to intended use, or otherwise abused, either
intentionally or unintentionally. Also specifically excluded are batteries and damage caused by attempts to
charge batteries not intended to be recharged, and water damage. Examples of non-warranty issues:
product ceases to work after exposure to water (in the form of any precipitation), moisture, or other
elemental forces; product is physically damaged from dropping, running over with any vehicle, falling from
any surface and impacting with the ground, gunshot, misuse, neglect, abuse, animal attack; product ceases
to work as a result of battery leakage, battery damage, intentional or unintentional wiring accidents,
connecting an unapproved charging device to the product, overpowering, and incorrect installation of
batteries; product ceases to work after connecting an unapproved external auxiliary device

16
Notes

17
Notes

18

19