Clear One Aura VERSA PRO 50 User manual

Quick-Start Guide
VERSA™ PRO 50
COMPLETE HOME OFFICE SOLUTION

Versa™ Pro 50
ii QSG-0076-002v1.1 February 2021
© 2021 ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice.
Document: QSG-0076-002v1.1 February 2021
CONTACT INFORMATION
Headquarters
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
US: +1.801.975.7200
International: +1.801.975.7200
Aura Sales
US: +1.888.HEY.AURA
International: +1.801.975.7200
[email protected]
Aura Tech Support
US: +1.888.HEY.AURA
International: +1.801.975.7200
[email protected]
NOTICES

Quick-Start Guide
1
QSG-0076-002v1.1 February 2021
COMPONENTS INCLUDED
The Versa Pro 50 includes the UNITE®50 4K ePTZ camera, the
CONVERGE®Huddle DSP Mixer, a Ceiling Mic Array, and a free
COLLABORATE®Space lifetime subscription.
Versa Pro 50
AUR-2100-006
UNITE 50 4K ePTZ camera,
USB cable,
and camera remote control
AUR-3200-701: (1)CONVERGE Huddle,
(2-4) Terminal Block Connectors, (5)
USB 3.0 cable, (6) TRRS cable, (7)
Mini COMBICON plug connectors,
(8-9) Phillips pan-head screws, (10)
Mounting ears kit
AUR-001-013-W
Ceiling Microphone Array,
cables
Free COLLABORATE
Space lifetime
subscription

Versa™ Pro 50
2QSG-0076-002v1.1 February 2021
SET UP YOUR PRODUCT
1. Connect the UNITE 50 to a USB 3.0 port on the CONVERGE
Huddle.
2. Connect the Ceiling Mic Array to a Mic/Line input on the
CONVERGE Huddle.

Quick-Start Guide
3
QSG-0076-002v1.1 February 2021
3. Connect the display to the HDMI output on the CONVERGE Huddle.
4. Connect the CONVERGE Huddle to a PoE power injector
(Midspan), or PoE Ethernet Network Switch (Endspan).

Versa™ Pro 50
4QSG-0076-002v1.1 February 2021
For more detailed information about CONVERGE Huddle, Ceiling Mic
Array, and UNITE 50 products, please refer to the appropriate user
manual or quick start guide on the ClearOne website:
www.clearone.com
5. To cast a laptop screen onto a display via USB 3.0, install the
DisplayLink driver (one time installation) onto the laptop.
You can download the driver from:
www.displaylink.com/downloads
Note: If a Windows 10 laptop comes with the DisplayLink
driver pre-installed, it does not need to be installed
separately. The Versa Hub has been tested with DisplayLink
driver version 8.2.1999.0.
6. Connect your laptop to the USB 3.0 Type-B input port on
the CONVERGE Huddle.