emitter.
) Power on the input source you want to show. (Keep the unused input power off, otherwise it may
interfere the normal display.)
5) Connect the power supply into SX-MX0 and turn on the display you want to watch.
6) Use remote or push the button to choose input source. Extra infrared receiver extension, IR emitter, are
supplied for remote control.
7) The IR signal of any IR extension will through "TX IR" port to send the signal out.
SOURCE-SINK AUTOFIT Function
This function applies to the situation when the source's HDMI version exceeds the
sink's HDMI version. (This function can be used to fix the deepcolor, 1080P, 1080i, 2ch audio, multi
channel audio issue.)
For example: When the TV is HDMI 1.2 version and PS3 source is HDMI 1.3 version, it will output HDMI
1.2 version.
(1)Under default mode, this machine will output 1.2 version HDMI signal(1080P and stereo audio).
(2) Under button mode.
There are two mode to update the EDID data according to the DIP setting. When the DIP is in default mode
( 0,0,0 ), the matrix will be in mix mode .
A
AA
A
、
、、
、
When the source is HDMI1.3, (e.g., HDMI output from PS3), OUTPUT1 to both support HDMI1.3
displays, press "selection of OUTPUT1” and “lock key" simultaneously, the machine will output HDMI1.3
signals.
B
BB
B
、
、、
、
When the source is HDMI1.3, (e.g., the HDMI output from PS3), OUTPUT 1 to are connected to the
displays that can only support HDMI 1.2 MAX, press "selection of OUTPUT1” and "lock key"
simultaneously (no matter whether HDMI OUTPUT port is connected to the display that supports HDMI
1.3 or not), it will output HDMI 1.2 signals.
When the DIP is in default mode ( 0,0,0 ), the matrix will be in copy mode .
Note:
Note:Note:
Note: The
TheThe
The method
methodmethod
method to
toto
to reset
resetreset
reset the
thethe
the machine
machinemachine
machine to
toto
to default
defaultdefault
default EDID
EDIDEDID
EDID setting:
setting:setting:
setting: Disconnect
DisconnectDisconnect
Disconnect the
thethe
the input
inputinput
input and
andand
and output.
output.output.
output. Please
PleasePlease
Please
press
presspress
press "selection
"selection"selection
"selection of
ofof
of OUTPUT1
OUTPUT1OUTPUT1
OUTPUT1”
””
” and
andand
and “
““
“lock
locklock
lock key"
key"key"
key" Simultaneously
SimultaneouslySimultaneously
Simultaneously for
forfor
for at
atat
at least
leastleast
least 3
33
3 seconds,
seconds,seconds,
seconds, and
andand
and EDID
EDIDEDID
EDID of
ofof
of all
allall
all the
thethe
the
four
fourfour
four input
inputinput
input ports
portsports
ports will
willwill
will be
bebe
be reset
resetreset
reset to
toto
to the
thethe
the default
defaultdefault
default setting.
setting.setting.
setting. The
TheThe
The audio
audioaudio
audio setting
settingsetting
setting of
ofof
of the
thethe
the default
defaultdefault
default EDID
EDIDEDID
EDID is
isis
is stereo.
stereo.stereo.
stereo. It
ItIt
It is
isis
is
suitable
suitablesuitable
suitable for
forfor
for TV
TVTV
TV sets.
sets.sets.
sets.
