Foxun SX-MX42 User manual

SX-MX42 HDMI Matrix
Operating Instruction
4 by 2 HDMI Matrix
Manual Version:Release 1013

Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Features
Routes four Ultra Hi Def sources to two Ultra HD displays simultaneously.
Supports resolutions up to Ultra HD 4K x 2K (3840 x 2160 @ 30Hz) and 1080p Full HD
Supports 36 bit Deep Color
Supports PCM , Dolby Digital™, and DTS Digital Surround™ ®
Audio SPDIF(Coaxial and optical ) signal output and Output A signal is simultaneous.
Support HDMI input/output cable 10 to 15 meters at 1080p/8 bit resolution
Input port 1 is compliant with HDMI1.4/MHL2.0 specification
Support CEC function (including Input port 1 4 and Output A)
Support HDCP 1.3 specification
Support HDMI1.4 ARC(Audio return channel) RX (Output A)
3DTV pass through
IR remote control
Surface mounting ears
Package Contents
1x HDMI Matrix
1x IR Remote control
2x wall/rack mounts
1x 5V/2A DC Adapter
1x User Manual
Compliant HDCP


Specifications
Operating Temperature Range -5 to +35℃(+23 to +95℉)
Operating Humidity Range 5 to 90%RH (No Condensation)
Band idth frequency 10.2Gbps
Input ports 4xHDMI (female)
Output ports
2 x HDMI outputs
1x Optical audio output
1x Coaxial audio output
Resolution outputs up to 4K x 2K (3840 x 2160 @ 30Hz)
Dimensions (HxWxD) 28x230x87mm
Po er consumption 5W(MAX)
Transmission Distance 15m(Maximum)over standard HDMI cable/26AWG
Net Weight 510g
Panel Description
Front Panel
Back Panel
1）Po er s itch.
2）IR Receiver Windo
3）Indicator of HDMI outputs
4）Indicator of HDMI Inputs
5）Output A Select Button
6）Output B Select Button
7）Reset button
8）HDMI input ports
9）HDMI output ports
10）S/PDIF audio out：Optical
11）S/PDIF audio out：Coaxial
12）Po er input

Remote Control
Output A selection.Numbers correspond with the HDMI outputs
(1-4) on the matrix.
Output selection.Numbers correspond with the HDMI outputs
(1-4) on the matrix.
Connection Diagram
Audio Return Channel (ARC)
ARC enables a source which connected to a display to route the source audio to an AV Receiver
or Amplifier.
steps
1.Make sure the display supports ARC
2.Connect the output port A of HDMI Matrix to HDMI 1 ( ARC port ) of the display (TX).
3.Connect the source to HDMI 2 of the display.
4.Connect the S/PDIF output port ( Optical port or Coaxial port) to an AV Receiver or Amplifier.

Matrix source audio isolate
1. Connect the source with HDMI Matrix.
2. Connect the HDMI matrix to HDMI2 of Display.
3. Connect the S/PDIF output port Optical port or Coaxial port) to an AV receiver or Amplifier. The
source audio can be isolated and transported by the S/PDIF port of AV receiver or Amplifier.
NOTE: make sure ARC function of TV is turned off when isolating the audio from the source.
NOTE: HD audio formats are not su orted through S/PDIF. eg. Dolby TrueHD or DTS-HD Master Audio

Safety information
safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC po er supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions.
Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the manufacturer or
parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric
shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in
proper orking condition.
WARRANTY
If your product does not ork properly because of a defect in materials or orkmanship, our Company (referred to
as "the arrantor" ) ill , for the length of the period indicated as belo , hich
starts ith the date of original purchase ("Limited Warranty period"), at its option either(a) repair your product ith
ne or refurbished parts, or (b) replace it ith a ne of a refurbished product. The decision to repair or replace ill
be made by the arrantor.
During the "Labor" Limited Warranty period there ill be no charge for labor.
During the "Parts" arranty period, there ill be no charge for parts. You must mail-in your product during the
arranty period. This Limited Warranty is extended only to the original purchaser and only covers product
purchased as ne . A purchase receipt or other proof of original purchase date is required for Limited Warranty
service.
Mail-In Service
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Include a letter detailing the complaint and provide a day time phone and/or email address here you can be
reached.
LIMITED WARRANTY LIMITS AND E CLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or orkmanship, and DOES NOT
COVER normal ear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages
hich occurred in shipment, or failures hich are caused by products not supplied by arrantor,or failures hich
result from accidents,misuse,abuse,neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, po er line surge, lightning damage,
modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage
that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRNTY.
(As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if
applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content.
The items listed are not exclusive, but are for illustration only.)
3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
(Parts(2)Year ,Labor(90) Days)