Foxxray FXR-SBT-01 User manual
V5.0
產品名稱: 迅音響狐藍牙音訊發射器
產品型號: FXR-SBT-01
藍牙版本: BT5.0
工作頻率: 2.402-2.480GHz
使用距離: 20M(無障礙物)
額定電壓: 5V
額定輸入電流: 14-27mA
支援裝置: PS4、PS5、Switch、Windows、MAC OS、Linux、
Android、IOS
(及其他支援USB音訊輸出標準之設備)
包裝內容物: 藍牙音訊發射器、Type-C轉接頭
一、產品規格
廢電池請回收
二、操作說明
三、狀態燈號
功 能 操作方式
與耳機配對 長按按鍵2秒
斷開連線 短按按鍵1下
還原原廠 長按按鍵8秒後拔除發射器
燈號 狀態
橘燈常亮 待機未連接
藍燈慢閃 搜尋配對中
藍燈快閃 回連中
藍燈常亮 已連接
四、操作說明
配對耳機
將發射器插入主機USB孔(若主機為Type-C孔可使用包裝內附之
Type-C轉接頭)。當首次使用時，插入主機時LED燈橘燈長亮，將耳
機開啟進入配對模式並保持耳機在發射器附近。長按發射器按鍵2
秒，LED燈變為藍燈慢閃，此時發射器進入搜尋配對中狀態。待連
接後燈號會轉為藍燈長亮，即可使用
配對第二個耳機
在已與第一隻耳機配對的狀態下，再次長按發射器按鍵2秒，可進
行第二個裝置之配對。
自動回連
首次配對成功之後，之後只要耳機處於可連接狀態，發射器會自動
回連耳機，回連狀態下LED為藍燈快閃狀態。
還原原廠
在任何狀態下，長按發射器按鍵8秒後拔除重新插上，可將發射器
還原原廠狀態並清除配對紀錄。
1. 因藍牙協議限制，麥克風收音功能會導致聲音輸出音質嚴重
壓縮及切換異常問題，故本裝置不支援麥克風功能。
2. 因考量一對二狀態下兩隻耳機音量輸出條件可能有所不同，
故本產品設計為音量不同步設計，兩個藍芽裝置及主機端接
可分別調整音量大小聲，若發現音量過小狀況，請確保各別
耳機及主機端皆已調整音量。
3. 本產品採用標準USB音訊傳輸協定，不須額外安裝驅動，但
裝置端需支援USB音訊輸出功能
4. 本產品支援最高20M無障礙物傳輸距離，但因各別藍牙耳機
接收訊號能力不同，實際訊號有效距離需依耳機而定。
五、注意事項
六. 其他常見問題解決方法
問 題
無法與耳機配對
無法自動回連
發射器當機
音量過小
訊號斷斷續續
解決方式
確保耳機未與其他裝置配對，保持耳機再
發射器1M距離範圍內，並確保耳機在可
搜尋配對模式。
確保耳機未與其他裝置配對，並處於可回
連狀態，若仍無法回連請嘗試重新配對。
請將發射器拔除後重新插上，若仍無法解
決請按照還原原廠操作。
確認耳機端及主機端音量皆已調整
確認發射器與耳機之前無過多障礙物或其
他訊號干擾源。若透過HUB連接或供電不
足可能造成訊號不穩定，建議將發射器直
接插在主機上。
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自
變更頻率，加大功率或變更原設計特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信：經發現有干擾現
象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信、指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備
之干擾。
委製廠商/進口商
廣鼎國際有限公司
生產國別 中國
公司地址 台北市內湖區新湖二路128號4樓之2
網站地址 www.intopic.com.tw
公司電話 (02)2796-8499
客服電話 (02)2796-3162
SyncSound
Wireless Audio Transmitter
V5.0
Product Name: SyncSound Wireless Audio Transmitter
Model No.: FXR-SBT-01
BT Version: BT5.0
Working Frequency: 2.402-2.480GHz
Working Distance: 20M(No Obstacle)
Voltage: 5V
Input Current: 14-27mA
Compatibility: PS4、PS5、Switch、Windows、MAC OS、
Linux、Android、IOS
(other devices that supports USB Audio)
Package Contents: Wireless Audio Transmitter、Type-C
Adapter
1.Product Specification
2.Button Function
3.LED Status
Function Operation
Enter Pairing Mode Long press the button for 2 seconds
Disconnect Click the button for once
Factory Reset Long press the button for 8 seconds
and unplug the transmitter
LED Status
Orange Standby not connected
Blue Flashes Slowly Searching & Pairing
Blue Flashes Quickly Connecting
Blue Connected
4.Operation
Pairing With Bluetooth Headset
Insert the transmitter into the USB port of the host (If the host is a
Type-C port, you can use the Type-C adapter included in the
package). When the first time using, the LED light will be steady
orange when plugged into the host. Turn on the headset to enter the
pairing mode and keep the headset near the transmitter. Press and
hold the button of the transmitter for 2 seconds. The LED light will
change to blue light flashing slowly and the transmitter will enter the
searching and pairing state. After connecting, the light will turn to
blue and the light will stay on, ready to use.
Pairing With 2nd Bluetooth Headset
When the transmitter has been paired with the first headset, press and
hold the button again for 2 seconds to pair the second device.
Auto Reconnect
After the first pairing is successful, the transmitter will automatically
reconnect to the headset when the headset is in the connectable
state. The LED will flash blue quickly in the reconnecting state.
Factory Reset
In any state, long press the transmitter button for 8 seconds and then
unplug it and plug it in again to reset the transmitter and clear pairing
record.
5.Caution
a.Due to the limitation of the Bluetooth protocol, the microphone
function will cause serious compression of the output sound quality
and abnormal switching problems, so this device does not support
the microphone function.
b.Considering that the volume output conditions of the two
earphones may be different in the one-to-two state, this product is
designed with a volume asynchronous design. The volume of the
two Bluetooth headsets and the host terminal can be adjusted
separately. If the volume is too low Status, please make sure that the
volume of each headset and host terminal has been adjusted.
c.This product adopts standard USB audio protocol. No additional
driver is required, but USB audio output function is required for the
host.
d.This product supports 20M transmission distance without obstacles,
but due to the different signal receiving capabilities of each
Bluetooth headset the actual distance is depends on the headset.
6.Common Problem Solution
Problem
Cannot pair with
headset
Unable to
automatically
reconnect
Crashes
Volume too low
Unstable signal
Solution
Make sure that the headset is not paired with
other devices Keep the headset near the
transmitter, and make sure that the headset
is in pairing mode.
Make sure that the headset is not paired with
other devices and is in connectable state. If it
still cannot be reconnected, please try to pair
again.
Please unplug the transmitter and plug it in
again. If the problem persists, please follow
the factory reset operation.
Confirm that the volume on the headset and
host side has been adjusted.
Make sure that there are no too many
obstacles or other signal interference
between the transmitter and the headset.
The signal may be unstable if it is connected
via a hub or Insufficient power supply. It is
recommended to plug the transmitter
directly into USB port of the host.
Company
Address
Website
Telephone
Customer Support
Intopic International Co LTD
4F-2, No. 128, Shinhu 2ND RD,Taipei,
114, Taiwan
www.foxxray.com.tw
+886-2-27968499
+886-2-27963162
Table of contents
