Franck Dubarry Crazy Colors User manual

user manual
crazy colors
42mm
Steel 316L
RONDA 5040 D
5atm
Sapphire

I II III
1
2
3
Setting the Time:
1
2
3
Pull out the crown to
position III (the watch stops).
Turn the crown until you
reach the correct time
Push the crown back into
position I.
Please note
In order to set the time to the exact
second, must be pulled out when the
second hand is in position «60».
Once the hour and minute hands have been
set, must be pushed back into position I
at the exact second.
1
3
I II
1
2
3
Setting the Date:
1
2
3
Pull out the crown to
position II (the watch
continues to run).
Turn the crown until the
correct date appears
Push the crown back into
position I.
Please note
The date can be changed during the date
changing phase between approx. 9:00 PM
and 12:00 PM; please note that the date must
be set to the date of the following day as in
this case the automatic date changing does
not occur at midnight.

1
2
3
Chronograph, basic functions
1
2
3
(Start / Stop / Reset)
Example:
Start: Press push-button A.
Stop: to stop the timing, press
push-button Aonce more and read the
chronograph counters (30mn/1/10 sec)
Zero positioning (Reset) : Press
push-button B. (The chronograph hands
will be reset to their zero positions.)
A
B
1
2
5
3
4
Chronograph, accumulated timing
1
2
3
4
5
Example:
Push-button A
Start: (start timing)
Stop
Restart: (timing is resumed)
Stop: (The accumulated measured time
is shown)
Push-button A
Reset: The chronograph hands are
returned to their zero positions.
A
B
Please note
Following , the accumulation of the timing
can be continued by pressing push-button A
(Restart / Stop, Restart / Stop, ...).
4

more informations at: www.franckdubarry.com
1
4
5
2
3
Chronograph, intermediate or interval timing
1
2
3
4
5
Example:
Push-button A & B
Start: (start timing)
Display interval: (timing continues in the background)
Making up the measured time: (The chronograph
hands are quickly advanced to the ongoing measured time.)
Stop: (Final time is displayed)
Push-button B
Reset: The chronograph hands are returned
to their zero position
A
B
Please note
Following 3, further intervals or intermediates
can be displayed by pressing push-button B
(display interval / make up measured time, ...).
4