Franke Vital Capsule Solo User manual

VITAL
EN Installation and user manual Kitchen Faucet
DE Installations- und Gebrauchsanweisung Küchenmischer
FR Manuel d‘installation et mode d‘emploi Robinet de cuisine
NL Installatie- en gebruikershandleiding Keukenkraan
IT Manuale per l‘installazione e l‘uso Rubinetto cucina
ES Manual de instalación y servicio Grifo de cocina
PT Manual de instalação e de assistência Misturadora de cozinha
EL Εγκατάσταση και εγχειρίδιο συντήρησης Μπαταρία κουζίνας
DA Installations- og servicevejledning Køkkenblandingsbatteri
NO Installasjons- og servicemanual Kjøkkenkran
SV Installations- och servicehandbok Köksblandare
FI Asennus- ja käyttöohje Keittiöhana
LT Montavimas ir vartotojo vadovas Virtuvinis maišytuvas
LV Uzstādīšana un lietotāja rokasgrāmata Virtuves jaucējkrāns
ET Paigaldus ja kasutusjuhend Köögikraan

– 2 –
B
A
C
360˚
360˚
360˚
30 max
311
273
160151
∅50
120
30 max
477
169.5
160151
∅50
303.5
228
73
90˚
120 79
30 max
550
169.5
260
235
∅50
73
90˚
160
151
120 79
345
200285
30 max
311
273
160151
∅50
120
30 max
477
169.5
160151
∅50
303.5
228
73
90˚
120 79
30 max
550
169.5
260
235
∅50
73
90˚
160
151
120 79
345
200285
30 max
311
273
160151
∅50
120
30 max
477
169.5
160151
∅50
303.5
228
73
90˚
120 79
30 max
550
169.5
260
235
∅50
73
90˚
160
151
120 79
345
200285
Vital Capsule Solo
Vital Capsule Tap swivel J-spout
Vital Capsule Tap swivel Highflex-spout

– 3 –
D
DB C
30 max
311
273
160151
∅50
120
30 max
477
169.5
160151
∅50
303.5
228
73
90˚
120 79
30 max
550
169.5
260
235
∅50
73
90˚
160
151
120 79
345
200285
FRANKE Chiller CT 2,5L, 220V-50Hz
B C

– 4 –
A A
D

– 5 –
B 1 2
C 1
A

– 6 –
2
3

– 7 –
A
30 mm max
1
3
2
ø 22 mm
27 mm
A
A
Rmax > 50 mm

– 8 –
D
D
Rmax > 50 mm /2"

– 9 –
30 mm max
2
1
ø 35 mm
36 mm
B
B
C
C

– 10 –
3B C
Rmax > 50 mm /2"
Rmax > 50 mm /2"

– 11 –
Rmax > 50 mm /2"
Rmax > 50 mm /2"
Rmax > 50 mm /2"
D
D

– 12 –
4
4
B
C

– 13 –
A
1

– 14 –
B

– 15 –
C

– 16 –
Cl
www.franke.com
A AB BC C
2 3

– 17 –– 17 –
EN
PRODUCT INFORMATION
Capsule filter
The Franke Filter Capsule is the first
system of is kind to combine active
carbon filtration with state-of-the-art
membrane purification.
The water is filtered point-of-use to
guarantee highest product safety and
hygiene.
Operating data for Capsule Filter Value
Flow rate @ 3 bar 3.5 L/ min
Pressure 2 bar
Capacity 500 L
Temperature range 5 °C 65 °C
Filter cartridge
Water is filtered thanks to the patented
filter technology. Bacteria, viruses,
microplastics and microparticles, odors,
pesticides and hormones are removed
from the tap water during filtration
process.
Chiller
Chiller is an optional device that can be
additionally connected with the Vital
capsule filter system and used to chill
water.
It is possible to enable and disable cold
water dispensing as well as temperature
control by acting on the thermostat.
During periods with low water collection
it is better to set the thermostat at
minimum.
During periods with high water collection
it is better to set the thermostat at
maximum. In this way the cooling circuit
is able to provide an ice reserve that
would be necessary during the times of
high operation of the machine.
To modify the temperature just turn the
control handle (or the regulation screw)
following the label placed near the
thermostat.
Higher values mean colder water.

– 18 –– 18 –
EN
INSTALLATION
General starting points for
installation
 Perform the following steps before
starting installation.
 Stop valves must already be
installed.
 Close the stop valves.
 In existing installations, remove the
tap, hoses and boiler if still in place.
 Mark the existing cold and hot water
connection.
 If Chiller is to be used as part of
the system, there must be wall plug
socket available for connection.
IMPORTANT: For subsequent steps, it
will be required to cut and route tubing
to fit the specific application in your
home. All tubing must be cut squarely
and free of burrs. Ensure there is no
damage within 1” of the cut end.
 DO NOT USE ANY FORM OF
SEALING COMPOUNDS, this is not
required for push fit connections,
and using sealing compounds could
cause leaks.
 All tubing connections must be firmly
seated.
 Tubing must be routed to avoid sharp
bends and have enough slack to
avoid straining connections. A P-clip
and mounting screw is included to
hold the tubing in place as needed
 Pull gently on each connection to
make sure they are secure. See
images below for details on tubing
installation and removal.
How to insert/remove
tubing in push fit
connections
 Insert the tubing squarely (Fig. 1).
 Make sure to insert tubing
completely (Fig. 2).
 To remove, push in collet and pull out
tubing (Fig. 3).

– 19 –– 19 –
EN
SWITCHING ON FOR THE FIRST TIME
Capsule filter
Before using Vital Capsule
for the first time:
9Check if installation was done
according to the manual.
9Check that water supply to the
system is turned ON.
9Check if filter cartridge is in place
 Activate the electronic timer by
pressing reset button for 3 seconds.
 Led light will blink: green, green,
green indicating that system is ready.
Then light will turn off.
 Filtration is ready
Reset needle key
Timer unit
LED light
Reset timer hole
Chiller
When you first use the product, in order
to remove any air inside the system, it is
recommended to:
 Open the water valve and wait a few
minutes to make sure there are no
water leakage.
 If the system.includes electrical
controls, connect the product to the
power supply to enable the delivery
keys.
 Press the cold water button to let the
air out. Release the button only when
the water starts coming out.
 Drain a few litres of cold and warm
water.
 When you first install the product,
you will have to wait approx. 1h
before dispensing cold water.

– 20 –– 20 –
EN
OPERATION
Capsule Filter status indication
Filter status indication is timer based.
LED light shows if filter is working or if
battery and/ or filter cartridge need to
be replaced.
Status indication LED light appearance User Action
Filter working ON/ OFF green light -
After 450 L Light turns red when ON/OFF Prepare/ purchase new
filter cartridge
After 500 L LED blinks red when ON/OFF Replace filter cartridge
New battery needed. LED light will blink green and red ON/
OFF until timer unit is replaced
Replace timer unit
During resetting timer
During first installation
LED light will blink green, green, green -
MAINTENANCE
Replacing timer unit
 See page 16/2 ABC.
 Repeat steps from paragraph FIRST
INSTALLATION to reset LED.
Replacing filter cartridge
and resetting timer
Filter must be replaced after 500L of
water. After replacing filter cartridge,
reset timer.
 To replace filter cartridge refer to
ilustration on page 16/3.
 To reset timer for 3 seconds push
button inside reset timer hole. LED
light will blink 3 times. After LED light
turns OFF, system is ready.