Franklin 60071X User manual

ITEM NUMBER: 60071X
LAUNCH RAMP™
www.franklinsports.com/60071X

PARTS LIST
ITEM#: 1
60071X
For replacement parts:
Visit: www.franklinsports.com/60071X
Email: [email protected]
Call: 1-800-225-8649
x2
Horizontal U Bars
A
QTY
x2
Vertical Arm Bars
B
QTY
x2
Bottom Poles
C
QTY
x1
Sleeve Net
D
QTY
x1
Cross Brace
E
QTY
x1
Ramp
F
QTY
x2
Adjustable Side Supports
G+H
QTY
x2
Wheels
I
QTY
x15
Bungees
J
QTY
x4
2.5in (6.4cm) Hex Screws and Nuts
K
QTY
x2
2in (5.1cm) Hex Screws and Nut
L
QTY
x2
1.75in (4.4cm) Hex Screws
M
QTY
x1
Wrench and Hex Tool Set
N
QTY
60071-R1 60071-R2
60071-R3

ASSEMBLY INSTRUCTIONS
1. Remove all components from the shipping
carton. Remove all protective wrap and layout
all components on the ground.
2. Ensure you have all components shown in the
parts identifier.
GENERAL NOTE
PARTS NOTE
STEP 1
Start by connecting
Horizontal U Bar (A)
to Bottom Pole (C) to
form the bottom frame.
ITEM#: 2
60071X
For replacement parts:
Visit: www.franklinsports.com/60071X
Email: [email protected]
Call: 1-800-225-8649
A x1
A
CC
C x2
PARTS NOTESTEP 2
Then take the Wheels
(I) and insert into the
Bottom Poles (C) as
shown. Insert the small
Hex Screws (M)
through the frame and
into Cross Brace (E).
Use the Allen Wrench
(N) to tighten.
Repeat this step on the
other side.
E
C x2
C
I
M
E x1
I x2
M x2
N x1
N

ASSEMBLY INSTRUCTIONS
ITEM#: 3
60071X
For replacement parts:
Visit: www.franklinsports.com/60071X
Email: [email protected]
Call: 1-800-225-8649
PARTS NOTESTEP 3
Insert the Vertical Arm
Bars (B) into the
Bottom Poles (C).
Insert the Hex Screw
(L) through the frame
and secure with nut.
Repeat this step on the
other side.
It may be helpful to
turn the frame on the
side to line up the hole.
B x2
L
B
B
L x2
L
PARTS NOTESTEP 4
Attach Horizontal U
Bar (A) to Bottom
Pole (C) as shown.
A x1
C
CC x2
A
C x2
C
C

ITEM#: 4
60071X
For replacement parts:
Visit: www.franklinsports.com/60071X
Email: [email protected]
Call: 1-800-225-8649
ASSEMBLY INSTRUCTIONS
PARTS NOTESTEP 5
Attach preassembled
Adjustable Side
Supports (G+H) to
frame using Hex
Screws and Nuts (K).
G+H x2
PARTS NOTESTEP 6
Loosen one side of the
Horizontal U Bar (A)
and slide the Sleeve
Net (D) as shown.
Then, reconnect the
joint.
A x1
D x1
K x4
K
G+H
K
K
K
G+H
D
A

ASSEMBLY INSTRUCTIONS
PARTS NOTESTEP 7
Secure the net with the
bungees. Wrap the
Sleeve Net (D) around
the Cross Brace (E)
and connect the first
two Bungees (J) as
shown.
Work your way around
the frame to secure the
net evenly.
G+H x2
K x4
E
J
D
PARTS NOTESTEP 8
Unfold 3-piece Ramp
(F) as shown.
F x1
F
ITEM#: 5
60071X
For replacement parts:
Visit: www.franklinsports.com/60071X
Email: [email protected]
Call: 1-800-225-8649

YOU ARE NOW READY TO PLAY!
ASSEMBLY INSTRUCTIONS
ITEM#: 6
60071X
For replacement parts:
Visit: www.franklinsports.com/60071X
Email: [email protected]
Call: 1-800-225-8649
PARTS NOTESTEP 9
Attach the Ramp (F) to
the frame using the
preinstalled self-stick
straps that are located
on the back of the
ramp.
F x1
F

FEATURES & OPERATIONS
Made In China
Franklin Sports Inc.
Stoughton, MA 02072
For replacement parts:
Visit: www.franklinsports.com/60071X
Email: [email protected]
Call: 1-800-225-8649
Ramp:
Kick the ball on the ground for authentic
true roll rebound.
Practice Trapping, Passing Accuracy and
One Touch shooting and passing
Rebound Wall:
Use for Give and Go training,
Passing Accuracy and trapping skills
Pull Strap
Push Button to adjust
the angle of the Ramp
and Rebounder
Built in Wheels