Franklin MWD-520 User manual

License Agreement
READ THIS LICENSE AGREEMENT BEFORE USING THE
ELECTRONIC REFERENCE. YOUR USE OF THE ELEC-
TRONIC REFERENCE DEEMS THAT YOU ACCEPT THE
TERMS OF THIS LICENSE. IF YOU DO NOTAGREE
WITH THESE TERMS, YOU MAY RETURN THIS PACK-
AGE WITH PURCHASE RECEIPT TO THE DEALER
FROM WHICH YOU PURCHASED THE ELECTRONIC
REFERENCE AND YOUR PURCHASE PRICE WILL BE
REFUNDED. ELECTRONIC REFERENCE means the soft-
ware product and documentation found in this package and
FRANKLIN means Franklin Electronic Publishers, Inc.
Limited Use License
All rights in the ELECTRONIC REFERENCE remain the
property of FRANKLIN. Through your purchase, FRANKLIN
grants you a personal and nonexclusive licensed to use this
ELECTRONIC REFERENCE. You may not make any copies
of the ELECTRONIC REFERENCE or of the data stored
therein, whether in electronic or print format. Such copying
would be in violation of applicable copyright laws. Further, you
may not modify, adapt, disassemble, decompile, translate,
create derivative works of, or in any way reverse engineer the
ELECTRONIC REFERENCE. You may not export or reex-
port, directly or indirectly, the ELECTRONIC REFERENCE
without compliance with appropriate governmental regula-
tions. The ELECTRONIC REFERENCE contains Franklin’s
confidential and proprietary information which you agree to
take adequate steps to protect from unauthorized disclosure
or use. This license is effective until terminated. This license
terminates immediately without notice from FRANKLIN if you
fail to comply with any provision of this license.
2

Introduction
Congratulations on your purchase of this unit. You can
now use your dictionary as a bookmark! Clip the unit
onto the cover of your book and use the ribbon to mark
a page. With this dictionary you can find over 80,000
entries, correct misspellings, save words to My Word
List, sharpen your spelling and increase your vocabu-
lary with learning exercises, and play fun, educational
word games. You can also set local and world times
using the clocks or store names and numbers using the
databank.
Getting Started
Gently pull the battery insulation tab to remove it. Use a
paper clip to gently press the Reset button on the back of the
unit. See “Resetting Your Unit” for details.
3

Key Guide
Main Keys
Toggles between the calculator and
Conversions menu.
Goes to the Confusables
®
list. At the Entry
screen, types a ? to stand for a letter in a
word. At a menu, displays a menu item. At a
dictionary entry, displays the headword. In
games, reveals the word and forfeits the
game.
Toggles between the Home and World
Time/Date.
Goes to the Databank menu.
Goes to the dictionary.
Goes to the Games menu.
Goes to the Learning Exercises menu.
Goes to the Setup menu.
4

Function Keys
In the dictionary, goes to the Entry screen. In
the calculator, clears all entries. In the con-
verter and databank, goes to its main menu.
Backs up, erases a letter, or turns off the
highlight at an entry.
Shifts to type capital letters and punctuation
marks.
Enters a word, selects an item, or begins a
highlight in an entry.
Displays a help message.
Direction Keys
Move in the indicated direction.
Goes to the next entry.
Goes to the previous entry.
At menus and dictionary entries, pages
down. At the Entry screen, types a space.
5

Key Combinations*
+ At a dictionary entry, goes to the top or bot-
tom of an entry. At menus, goes to the top or
bottom of a list.
+ At the Entry screen, types an asterisk to
stand for a series of letters in a word. In
games, gives a hint or shuffles the letters.
*Hold down the first key while pressing the second.
Calculator Keys
Q–P Types numbers.
A(1/x) Calculates a reciprocal.
S(√x) Calculates a square root.
D(x
2
)Squares a number.
F(%) Calculates a percentage.
G(.) Inserts a decimal point.
H(+),J(-) Adds, subtracts, multiplies or divides numbers.
Z(+/-) Changes the number on the screen to a neg-
ative or positive number.
X( M +) Adds the number on the screen to the num-
ber stored in the memory.
C( M –) Subtracts the number on the screen from the
number stored in the memory.
V(
MR )Recalls the number stored in the memory.
B(
MC )Clears the memory.
6
/

➤About Screen Illustrations
Some screen illustrations in this User’s Guide may
differ slightly from what you see on screen. This does
not mean that your unit is malfunctioning.
➤Help is Always at Hand
You can view a help message at any screen by
pressing HELP. Use the direction keys to read the
message. To exit help, press BACK. To read a tutori-
al describing how to use the product, select Tutorial
from the Setup menu.
7

Replacing the Battery
Your unit uses 1 CR-2016, 3-volt lithium battery. Important!!
Before you follow these steps please have the new battery at
hand. You will also need a small Phillips screwdriver (one
that fits into screws with an “x” notch).
1. Turn the unit off and turn it over.
2. Use a Phillips screwdriver to remove the screw on
the battery cover and then remove the cover.
3. Remove the old battery and insert the new one with
the positive (+) side facing up.
4. Replace the battery cover.
Warning! If the battery wears out completely, or if you take
more than a few seconds while changing the battery, any
user-entered information will be erased. You should always
keep written copies of your important information.
➤Follow the Arrows
The flashing arrows on the right of the screen show
which arrow keys you can press to move around
menus or view more text.
8

Setting the Clock
The clock lets you set a Home Time and view local times
around the world. You must set the Home time before view-
ing World Times as World Times are based on Home Time.
➤Setting Home Time
1. Press .
You see the Home Time mode.
2. Press Sto enter the setting mode.
3. Press ENTER to select Set Time Format.
Press or to cycle through the 12- and 24-
hour Day/ Month/Year formats. Press ENTER to save
your selection.
4. Press to highlight Set DST and press ENTER to
select it.
Press or to cycle between DST On or DST
Off. Press ENTER to select your choice.
5. Press to highlight Set Home Time and press
ENTER to select it.
9

Press or until the current hour is displayed.
Press to move to minutes, then press or
until the current minute is displayed.
Press ENTER to set the time.
6. Press to highlight Set Date and press ENTER to
select it.
Use or to move to the next or previous field.
Use or to scroll to the current
day/month/year. Press ENTER to set it.
7. Press to highlight Set City and press ENTER to
select it.
Press or until your local city is displayed.
Press ENTER to select it.
8. Press to exit setting mode.
10