Freedom Scientific TOPAZ PHD Parts list manual

TOPAZ®PHD Control Panel –Basic Functions
440775-001 Rev B
(1)
BRIGHTNESS
(Yellow dial)
Turn clockwise to increase screen brightness.
Turn counterclockwise to decrease screen
brightness.
(2)
FREEZE FRAME
(Red button)
Press to freeze the image that is displayed on the
screen.
Press again to return to live view.
Press and hold for approximately six seconds to
enter or exit Review mode. Review mode lets you
view or delete images saved on an SD card.
(3)
MAGNIFICATION
(Black dial)
Turn to zoom in and increase magnification or zoom
out and decrease magnification
(4)
FIND
(Orange button)
Press and hold to zoom out and display crosshairs
on the screen to help you reposition the object under
the camera.
Release to return to the previous magnification level.
(5)
COLOR MODE
(Blue dial)
Turn to cycle through color modes.
(A)
ADVANCED
(Black button)
Use in combination with other controls to access and
perform advanced features.
See Advanced Functions for more information.

TOPAZ®PHD Control Panel –Advanced Functions
The black ADVANCED button (A) is used with other control panel buttons and
dials to access and perform more features and operations.
Always press and hold the ADVANCED button (A) first, and then press or turn
the other buttons or dials to perform the advanced task.
For example, to dim or brighten the LED reading light, first press and hold the
ADVANCED button (A), and then turn the yellow BRIGHTNESS dial (1).
(A + 1)
LED Brightness
(Yellow dial)
Turn to adjust the LED reading light brightness.
(A + 2)
Save Image
(Red button)
Press and hold to save the current image to an SD
Card.
Release when the Save icon appears.
Images can only be saved when an SD Card is in
the SD Card slot.
(A + 3)
Lines and Masks
(Black dial)
Turn to cycle through and display horizontal lines,
horizontal masks, vertical lines, vertical masks,
and no lines or masks on the screen.
(A + 4)
Focus Lock
(Orange button)
Press and hold to turn Focus Lock on and off.
Release when the Lock or Unlock icon appears.
(A + 5)
Move Lines or
Masks (Blue dial)
Turn to adjust the spacing between lines or masks.
(A)
Configuration Menu
(Black button)
Press and hold for approximately 10 seconds to
enter or exit Configuration mode.