Freedom 24126908 User manual

Page 1 of 5
www.freedom.com.au
www.freedomfurniture.co.nz
CABANA BAR CABINET NATURAL/ WHITE
24126908
Parts
x 4
Ax 2 Bx 8 Cx 4 D
x 1
1
x 13
x 1
2
M4 x 35mm M8 x 17mm 101 x 20 x 8mm355x40x16mm
Thank you for purchasing the Cabana Bar Cabinet . Before you begin to assemble your new
piece of furniture, please check to ensure that all hardware and parts have been supplied.This
page lists all contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void
your warranty.
If you experience any problems with your new purchase, please phone Freedom Customer
Service (FCS) on 1300 135 588 (Australia) or 0800 469 327 (New Zealand).
Care Information
DO
Use tablecloths, table runners and coasters to help protect surfaces from scratching.
Only use freedom recommended care products as many supermarket polishes and waxes
contain high levels of silicon and petroleum distillate which can damage the surface.
Polish your furniture every 3 to 6 months, making sure the surface is free from dust before you start.
DON’T
to remove.
Avoid direct sunlight, as this will cause colour change. If the furniture is in direct sunlight, move
items like vases around to avoid spotting.
Avoid applying too much polish as this will build up and need to be removed with a wood-
cleaning product.
Hardware (Supplied)
Tools Required (Not Supplied)

www.freedom.com.au
www.freedomfurniture.co.nz
24126908
Step 1.
Page 2 of 5
A
C
B
1
3
2
Step 2.
CABANA BAR CABINET NATURAL/ WHITE

www.freedom.com.au
www.freedomfurniture.co.nz
24126908
Page 3 of 5
Step 3.
Push to tighten
FINAL Step: Attach anti tilt strap or bracket to wall
IMPORTANT:
DO NOT place toys or other child appealing items on top of this furniture
AVOID fully opening all drawers at the same me
DO NOT ALLOW Small children to climb onto Drawers, shelves or to swing from open
doors
WARNING:
To prevent your furniture from l ng forward and possibly causing property damage or personal
injury it is recommended that you Securely a ach the an - lt straps or brackets provided to
your wall using appropriate fixings
CAUTION:
For your safety when attaching the anti - tilt fixings;
Check for any electrical wires or plumbing insidethe wall before drilling any holes (if you
are unsure please seek professional advicefrom a qualified tradesman)
Walls are constructed from dierent materials eg; Masonry (solid brick) or plaster board
lined cavity walls (hollow).
It is important that you use the appropriate wall fixings for your wall type.
(Yourlocal hardware store will have the necessary drills and fixings and can oeradvice if
needed)
CABANA BAR CABINET NATURAL/ WHITE

www.freedom.com.au
www.freedomfurniture.co.nz
24126908
Step 4.
Step 5.
Page 4 of 5
Back view
Anti tilt strap
The wall
Drill a hole on the wall
CABANA BAR CABINET NATURAL/ WHITE

www.freedom.com.au
www.freedomfurniture.co.nz
24126908
Step 6.
Page 5 of 5
D
CABANA BAR CABINET NATURAL/ WHITE

Assembly Instructions
Hinge Adjustment
Page 1
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS) on
1300 135 588 (Customers outside Australia should contact their closest Freedom store.)
Assembly Instructions
Hinge Adjustment
Page 2
DoorCarcass
DoorCarcass
DoorCarcass
Lateral Movement
Horizontal Movement
How to fix it
- To move the door towards the centre of the unit,
loosen Screw "A". Adjust the door and then tighten Screw
"B".
- To move the door away from the centre of the unit, loosen
Screw "B". Adjust the door and then tighten Screw
What it looks like
- The door will not be flush with the side panel.
What it looks like
- The door will appear too far or too close from
the front edge of the side panel.
Screw "A"
Screw "B"
Vertical Movement
How to fix it
- To move the door towards or away from the horizontal
panels, loosen Screws "C". Adjust the door and then
tighten Screws "C".
What it looks like
- The door will not be flush with the vertical
panel.
Screw "C"
Screw "C"
How to fix it
- To move the door towards or away from the unit, loosen
Screw "A". Adjust the door forwards or backwards until
there is an even gap between the door and the front edge
of the side panel.
- Tighten Screw "A" once the adjustment has been made.
Screw "A"