Freedom Burleigh Console 24272957 User manual

Thank you for purchasing the Burleigh Console 2Drawer.Before you begin to assemble your new
piece of furniture, please check to ensure that all hardware and parts have been supplied.This page
lists all contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase,please phone Freedom Customer service (FCS) on
1300 135 588(Australia) or 0800 469 327(New Zealand).
Burleigh Console 2 Drawer
24272957
Page 1 of 4

freedom
www.freedom.com.au
www.freedomfurniture.co.nz
Parts.
Burleigh Console 2 Drawer
24272957
Page 2 of 4

Page 3 of 4
Burleigh Console 2 Drawer
24272957

Page 4 of 4
Burleigh Console 2 Drawer
24272957

Screw A
Screw A
Screw B
Screw B
Example of misaligned drawer.
Drawer will not be flush with the
side panel.
How to Correct?
1. Fully extend drawer that needs
re-aligning.
2. Loosen Screw A but do not
remove.
3. Remove Screw B.
4. Adjust the drawer up or down as
required.
5. Screw in Screw B with a new
hole
6. Tighten Screw A
Assembly Instructions
Drawer Adjustment
www.freedom.com.au
www.freedomfurniture.co.nz
Tools Required (Not Supplied)