Freedom ARCHIBALD DESK 23413078 User manual

Page 1 of 2Freedom Customer Service: 1300 135 588www.freedom.com.au
ARCHIBALD DESK
23413078 23413085
Thank you for purchasing the ARCHIBALD DESK. Before you begin to assemble your new piece of
furniture, please check to ensure that all hardware and parts have been supplied.This page lists all
contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your
warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer Service (FCS)
on 1300 135 588. Customers outside Australia should contact their closest Freedom store.
Hardware (Supplied)
Parts
Care Information
Glass
The glass used in this product is known as tempered glass. Although it is up to four times tougher than regular
glass, it is not unbreakable.Tempered glass should be cared for like normal glass. Clean Glass using a recognised
glass cleaning product, avoid any overspray. Careless handling or use sometimes produces damage which may
not be visible to the eye. Damaged glass may spontaneously shatter if subjected to thermal or mechanical stress.
Avoid dropping objects on the glass. Do not allow hard or pointed objects to come into contact.
Timber
Periodically check and re-tighten any fasteners. Dust weekly using a soft, clean cloth. Do not use harsh abrasives,
chemicals or polishes containing silicone. Avoid direct sunlight as this will cause the timber to change colour.
It is important to remove moist substances immediately.
1
2
2
ITEM DESCRIPTION QTY
1
2
glass top
leg
1pc
2pcs
Code Description Qty
B
Code Description
Screw
Qty
x4
M8x30
C
Code Description
Spring Washer
Qty
x4
D
Washer
x4
A
Spanner
x1

Page 2 of 2Freedom Customer Service: 1300 135 588www.freedom.com.au
ARCHIBALD DESK
23413078 23413085
Step
Remark:This product requires 2 persons to assemble.
DO NOT TIGHTEN SCREWS OR NUTS COMPLETELY ASSEMBLED!
please assemble the product as below step guide.
1
2
2
A
Spanner
x1
B
Screw
x4
M8x30
C
Spring Washer
x4
D
Washer
x4