Freescale Semiconductor KITMPR03xEVM User manual

Unpack the board.
Verify package contents
according to the kit Web site:
http://www.freescale.com/
sensortoolbox
Assemble the hardware by connecting
the development board to the interface
board. Any Sensor Toolbox electrode
boards, including the ones in this kit can
be used with this interface board.
Go to http://www.
freescale.com/
sensortoolbox and download
the latest version of software
by clicking the link.
All Sensor Toolbox kits use the same
software and driver, so the install only
needs to be done once. During the install
of the software follow the on screen
instructions to install the communication
driver for the tool. Check back
occasionally for software updates.
Plug in the USB and
turn the board on using
the power switch. Run the
Sensor Toolbox link on your
desktop and enjoy!
For other compatible kits visit
http://www.freesacle.com/sensortoolbox
KITMPR03xEVM Quick Start Guide
STEP
1
STEP
2
STEP
3
SENSOR TOOLBOX
Proximity Sensor Kit

Proximity Sensor Kit
SENSOR TOOLBOX
Freescale and the Freescale logo are trademarks or registered
trademarks of Freescale Semiconductor, Inc. in the U.S. and other
countries. All other product or service names are the property of
their respective owners. © Freescale Semiconductor, Inc. 2009.
Doc Number: KITMPR03XEVMPQSG / REV 0
Agile Number: 926-77953 / REV C
Learn more at www.freescale.com/sensortoolbox
KITMPR03xEVM
Interface Board
Connector for
the MPR031EP
Development
Board
Freescale 8-bit MCU
MC9S08QG8
MPR031EP
Development
Board
Freescale MPR031EP 2
x 2 x 0.65mm μDFN
Two Electrode
Board IRQ Enabled
Three
Electrode Board
Power Switch
Standard Electrode
Connector—Any Sensor Toolbox
Electrodes can be used.
USB mini-b
connector
BDM Debug
Port for MCU