Frog Bikes CITY User manual

KICKSTAND
MANUAL
FROG CITY | HYBRID | FIRST PEDAL
Tel: [phone]
Web: www.frogbikes.com
Email: [e-mail]
V1.2022

3
2 X HEX BOLTS
2 X PACKAGING WASHERS
KICKSTAND
1. The plastic packaging
washers are for transpor-
tation only, and should be
removed before installing
the kickstand.
2. Locate the mounting
point underneath the left-
side chain stay.
3. Attach bolts through the
kickstand mount.
4. Tighten both bolts with an
allen key to 10nm.
5. Ready for adjustment.
PACK CONTENTS
TOOLS NEEDED
ASSEMBLY
4MM ALLEN KEY
1. If installed correctly, the
kickstand should move up and
down with a firm movement
of the foot.
2. To adjust the height of
the stand, simply pull the pin
upwards with your thumb
3. Slide the base to the
desired height.
4. Close the pin to lock in
position
OPERATING & ADJUSTING
2
Up position
Down position

4
COMPLETE!
You can fine-tune the positioning of your
kickstand by opening the pin and trying
different settings to achieve you desired
outcome.