Frontgate Kingston 166188A NAT User manual

Assembly Instructions
Glue
Parts Picture Description QTY Parts Picture Description QTY
A
B
C
Hex Key M6
D1x
1x
PART LIST & HARDWARE:
166188A NAT Kingston Chaise Frame Natural
Chaise
2x
Arm rest
1x
Wooden Plug 8x
E
F
8x
Bolt
M8-50

PRE ASSEMBLY INSTRUCTION:
Don't throw away packaging materials until the assembly is complete. Part might be accidentally thrown away.
ASSEMBLY STEPS:
Step 1.
Fix the arm rest A onto the chaise B with bolt C using Hex key D.
Step 2.
Apply glue E on the edge of the wooden plug F. Insert the wooden plug in all the holes where the bolt installed..
AA
B
C
D
E
F

Care & Maintenance:
Teak does not require any special maintenance other than an occasional cleaning.
If left to age naturally outdoors, the surface of wood will gradually change to a soft silver –grey as the pigments
fade. We recommend that you maintain the silver patina with regular, gentle cleaning with soft-soap flakes
dissolved in warm water (not detergent). Be sure to use a non-abrasive brush or sponge, and avoid using steel
wool or wire brushes. When finished, rinse the entire piece of furniture with low-pressure water to remove any
dirt or remaining solution and then dry completely.
Frontgate offers a full range of professional solutions to help maintain the beauty of your teak. For Information
about teak cleaning products, please visit our website at frontgate.com or call our product specialists at 1-800-
537-8484
Frontgate: Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484
or email:[email protected]. Specialists are available weekdays 8:00 a.m. to 8:00 p.m .EST or Saturdays 9:30
a.m. to 6:00 p.m.
FULLY ASSEMBLED ITEM