FSN FS-L190 D User manual

MEDICAL LCD MONIT
MEDICAL LCD MONITOR OR
USER'S GUIDE
Before connecting, operating or adjusting this
product, please read this instruction booklet
carefully and completely.
Rev. 4.0, August 20113

Model definition
F S- L XXX* D T
1 2 3 4 5 6
1. FS : Monitor manufacturer.
2. L : Panel manufacturer.
3. XXX : Display size.
4. * : Signal input option.
5. D : Medical grade.
6. T : Touch screen installed.
MEDICAL LCD MONITOR
FS-L190*D (19”)
FS-L190*DT(19”)
FS-L240*D (24”)
FS-L240*DT(24”)
FS-L260*D (26”)
FS-P260*D (26”)
FS-L320*D (32”)
FS-L420*D (42”)
FS-L550*D (55”)

English - 2
Symbol Definitions ………………………………………………………………3
Safety Instructions ………………………………………………………………5
Caution………………………………………………………………………………8
FCC Information …………………………………………………………………11
Parts
●FS-L190*D / FS-L190*DT……………………………………………………16
●FS-L240*D / FS-L240*DT……………………………………………………17
●FS-L260*D / FS-P260*DT……………………………………………………18
●FS-L320*D ……………………………………………………………………19
●FS-L420*D / FS-L550*D ……………………………………………………20
Connector
●FS-L190*D / FS-L240*D / FS-L260*D / FS-P260*D / FS-L320*D ……21
●FS-L190*DT / FS-L240*DT / FS-P260*DT ……………………………… 22
●FS-L420*D / FS-L550*D …………………………………………………… 23
Mechanical Product Drawing
●FS-L190*D / FS-L190*DT ………………………………………………… 24
●FS-L240*D / FS-L240*DT ………………………………………………… 25
●FS-L260*D …………………………………………………………………… 26
●FS-L260*D(LED) / FS-P260*D(LED)……………………………………… 27
●FS-L320*D …………………………………………………………………… 28
●FS-L420*D …………………………………………………………………… 29
●FS-L550*D …………………………………………………………………… 30
Control ……………………………………………………………………………31
Power management ……………………………………………………………35
OSD ………………………………………………………………………………36
Standard Signal table …………………………………………………………51
Signam connector Pin Assignments …………………………………………52
Specification ……………………………………………………………………55
Cleaning instructions ……………………………………………………………63
DVI ②(Fiber) install guide (Rx) ………………………………………………66
Table of Contents

3-English
Symbol Definitions
The following symbols appear on the product, its labels, or the product package.
Each symbol carries a special definition, as defined below.
Dangerous : High Voltage.
Consult accompanying documents.
Direct Current.
lndicates protective earth ground.
DC Power control switch.
lndicates equipotential earth ground.
Serial Number.
Consult the operating instructions.
Top-Bottom. Fragile.
Maximum Stacking.(19”/24”/26”)
Do not get wet.
Maximum Stacking.(32”/42”/55”)
Representative in the USA.
Authorised representative in the European community.
Manufacturer.
Indicates the manufacturing date.
Power adaptor.

English - 4
Indicates proof of conformity to applicable European Economic
Community Council directives and to harmonized standards published
in the official journal of the European Communities.
Medical LCD monitor is in accordance with UL 60601-1 and CAN/CSA
C22.2 No.601.1 in regards to electric shock, fire hazards, and
mechanical hazard.
Tested to comply with FCC Class B standard.
This symbol indicates that the waste of medical LCD monitor must not
be disposed as unsorted municipal waste and must be collected
separately. Please contact the manufacturer or other authorized
disposal company to decommission your medical LCD monitor.
Language: English
Note: A printed copy of the manual in English is provided with the product. Users within
EU member state, please contact local distributor or Foreseeson Custom Displays, Inc.
for other languages or refer to the CD manual enclosed with the product. This applies
to EU member state where the product has been purchased through authorized
channels.
Indicates the display is approved according to the CCC regulations.
China RoHS labels.
Humidity limitation.
Temperature limitation.
Atmospheric pressure limitation.

5-English
Safety Instructions
On Safety
1. Before connecting the AC power cord to the DC adapter outlet make sure the
voltage designation of the DC adapter corresponds to the local electrical
supply.
2. Never insert anything metallic into the cabinet openings of the medical LCD
monitor. Doing so may create the danger of electric shock.
3. To reduce the risk of electric shock, do not remove cover.
No user-serviceable parts inside. Only a qualified technician should open the
case of the medical LCD monitor.
4. Never use your medical LCD monitor if the power cord has been damaged.
Do not allow anything to rest on the power cord, and keep the cord away from
areas where people can trip over it.
5. Be sure to hold the plug, not the cord,when disconnecting the medical LCD monitor
power cord from an electric socket.
6. Unplug your medical LCD monitor power cord when it is going to be left unused
for an extended period of time.
7. Unplug your medical LCD monitor power cord from the AC outlet before any service.
8. If your medical LCD monitor does not operate normally, in particular, if there are
any unusual sounds or smells coming from it, unplug it immediately and contact
an authorized dealer or service center.
9. Please contact the manufacturer if the set should be installed in an inaccessible
area.
Warning
Do not touch input or output connectors and the patient simultaneously.

English - 6
Warning
This medical LCD monitor is intended for connection to input/output signals and other
connectors that comply with relevant IEC standard (e.g.,IEC60950 for IT
equipment and IEC60601 series for medical electrical equipment).
In addition, all such combination-system shall comply with the standard IEC
60601-1-1, safety requirements for medical electrical systems. Any person who
has formed a combination-system is responsible for the system to comply with the
requirements of IEC 60601-1-1.
If in doubt, contact qualified technician or your local representative.
On installation
1. Openings in the medical LCD monitor cabinet are provided for ventilation.
To prevent overheating, these openings should not be blocked or covered. If
you put the medical LCD monitor in a bookcase or some other enclosed
space, be sure to provide adequate ventilation.
2. Put your medical LCD monitor in a location with low humidity and a minimum
of dust.
3. Do not expose the medical LCD monitor to rain or use it near water
(in kitchens, near swimming pools, etc.). If the medical LCD monitor
accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean the medical LCD monitor with a damp cloth if necessary,
but be sure to unplug the medical LCD monitor first.
4. Place your medical LCD monitor near an easily accessible AC outlet.
5. High temperature can cause problems. Don't use your medical LCD monitor in
direct sunlight and keep it away from heaters, stoves, fireplaces,and sources
of heat.
6. Don’t place your medical LCD Monitor on an unstable stand, Medical LCD monitor
may malfunction or fall.
7. This medical LCD monitor should not topple over when tilted at a 5 °angle, in any
position, during NORMAL USE, excluding transport.
8. In the position specified for transport, medical LCD monitor shall not overbalance
when tilted at a 10 degree angle.
9.
When you carry this product, please use both handles on left and right side of
the product which carrying more two persons.
If you want the product to be installed on another place, please call A/S center.

7-English
10. Do not use other cable or accessary that are not provided.
11. Do not lay this monitor on the other equipment.
Environmental Conditions for operation and Storage
- Temperature range within 0°C to 40°C(operation), -20°C to 60°C(storage)
- Relative humidity range 10% to 85%
Atmospheric pressure range within 500 to 1060hPa.
Intended Use
- This Medical LCD Monitor is an accessory intended for use with Medical
Equipment to display alphabetical, numerical and graphical data.

English - 8
This symbol alerts the user that important literature concerning the
operation of this unit has been included. Therefore, it should be read
carefully in order to avoid potential problems.
This symbol warns user that un-insulated voltage within the unit may
have sufficient magnitude to cause electrical shock. Therefore, it is
dangerous to make contact with any part inside the unit. To reduce
the risk of electric shock, DO NOT remove cover (or back).
There are no user serviceable parts inside. Refer servicing to
qualified service personnel.
To prevent fire or shock hazards, do not expose this unit to rain or
moisture. Also, do not use this unit's polarized plug with an extension
cord receptacle or other outlets unless the prongs can be fully inserted.
The display is designed to meet the medical safety requirements for a
patient vicinity device.
This device may not be used in connection with life support
equipment.
CAUTION
Underwriters Laboratories (UL) Classification:
UL safety Compliance:
This medical LCD monitor is U.L. Classified WITH RESPECT TO
ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL 60601-1/CAN/CSA C22.2 NO. 601.1

9-English
Recycling Follow local governing ordinances and recycling plans regarding the
recycling or disposal of this equipment.
EEC Safety Compliance
This medical LCD monitor unit meets the requirements of EN-60601-1
so as to conform to the Medical Device Directive 93/42/EEC
(general safety information).
Use 120V rating 5-15P type plug only in the U.S
This medical LCD monitor complies to the above standards only when used with the
supplied medical grade power supply.
19”(FS-L190*D / FS-L190*DT) - JMW190KA1200F02(BRIDGE POWER CORP.)
24”/26”(FS-L240*D / FS-L240*DT / FS-L260*D)
JMW1150KA2400F04(BRIDGE POWER CORP.)
26”LED (FS-P260*D / FS-L260*D) - BPM150S24F10(BRIDGE POWER CORP.)
32”(FS-L320*D) -JMW1180KA2400F01(BRIDGE POWER CORP.)
Caution: Make sure the power cord is the correct type that is required in your area.
This medical LCD monitor has a universal power supply that allows operation in
either 100-120V AC or 200-240V AC voltage areas (no user adjustment is required).
Use the proper power cord with correct attachment plug type. If the power source is
120 V AC, use a power cord which is a Hospital Grade Power Cord with NEMA 5-15
style plug, labeled for 125 volts AC with UL and C-UL approvals. If the power source
is a 240 V AC supply, use the tandem (T blade) type attachment plug with ground
conductor power cord that meets the respective European country's safety
regulations.
The hospital-grade plug for medical products intended for use in Denmark has
DEMKO approval and is rated 13 amps at 250Vac. Plug is recommended for use in
medical applications and specifications are being added to the standard SB
107-2-D1. Plug mates with maker's Danish hospital-grade socket. Hospital sockets
have slightly different shaped openings allowing only the hospital plug, not the
standard Danish plug, to be inserted, to protect the ac circuit in specific medical
settings.
A ground post, located on the back of the display, may be used for the purpose of
grounding the display’s chassis. Any such ground must be installed in accordance
with applicable electrical codes. The groundpost is shown on the mechanical drawing
found on page 20~22.

English - 10
Servicing
Do not attempt to service the medical LCD monitor yourself, as opening or
removing covers may expose you to dangerous voltages or other hazards, and
will void the warranty. Refer all servicing to qualified service personnel.
Unplug the medical LCD monitor from its power source and refer servicing to
qualified personnel under the following conditions:
- If the power cord or plug is damaged or frayed.
- If liquid has been spilled into the medical LCD monitor.
- If objects have fallen into the medical LCD monitor.
- If the medical LCD monitor has been exposed to rain or moisture.
- If the medical LCD monitor has been subjected to excessive shock by being
dropped.
- If the cabinet has been damaged.
- If the medical LCD monitor seems to be overheated.
- If the medical LCD monitor emits smoke or abnormal odor.
- If the medical LCD monitor fails to operate in accordance with the operating
instructions.
Accessories
Use only accessories specified by the manufacturer, or sold with the medical
LCD monitor.
Classification
- Protection against electric shock : Class I including AC/DC Adapter
- Applied Parts : No Applied Parts
- Degree of safety in the presence of flammable anesthetics mixture with air or
with oxygen or with nitrous oxide.
Not suitable for use in the presence of a flammable anesthetics mixture with
oxygen or with nitrous oxide.
- Mode of operation : Continuous.
Cleaning Instructions
Follow your hospital protocol for the handling of blood and body
fluids. Clean the display with a diluted mixture of mild detergent and
water. Use a soft towel or swab.
Use of certain detergents may cause degradation to the labels
and plastic components of the product.
Consult cleanser manufacturer to see if agent is compatible.
Do not allow liquid to enter the display.

11 - English
FCC Information
This medical LCD monitor unit has been tested and found to comply with the
limits of a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against interference.
This monitor can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, it may interfere with other radio communications
equipment. There is no guarantee that interference will not occur in a particular
installation.
If this equipment is found to cause harmful interference to radio or television
reception, the user is encouraged to try to correct the interference by carrying out
one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the medical LCD monitor and the subject of
interference.
3. Plug the monitor into an outlet on a different electrical circuit than that to which
the subject of interference is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICES TO USER
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC WARNING
This medical LCD monitor generates or uses radio frequency energy. Changes
or modifications to this medical LCD monitor may cause harmful interference
unless the modifications are expressly approved in the instruction manual. The
user could lose authority to operate this equipment if an unauthorized change or
modification is made.

English - 12
1. Guidance and manufacturer's declaration - electromagnetic emissions
The medical LCD monitor is intended for use in the electromagnetic environment specified below.
The customer or the user of the medical LCD monitor should assure that it is used in such an environment.
Electromagnetic environment -guidance
The medical LCD monitor uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment
The medical LCD monitor is suitable for use in all establishments,
including domestic establishments and those directly connected
to the public low-voltage power supply network that supplies
buildings used for domestic purposes
2. Guidance and manufacturer's declaration - electromagnetic immunity
This medical LCD monitor is intended for use in the electromagnetic environment specified below.
The customer or the user of the medical LCD monitor should assure that it is used in such an environment.
Compliance level
6kV Contact
8kV air
2kV for power supply
lines
1kV for input/output
lines
Emission test
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations
IEC 61000-3-3
Compliance
Group 1
Class B
D
Complies
Immunity test
Electrostatic
discharge(ESD)
IEC61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
IEC 60601 Test level
6kV Contact
8kV air
2kV for power supply
lines
1kV for input/output
lines
Electromagnetic environment -guidance
Floors should be wood,concrete or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%
Mains power quality should be that of a
typical commercial or hospital environment.

13 - English
Surge
IEC 61000-4-5
Conducted RF
IEC 61000-4-6
1kV differential mode
2kV common mode
3 Vrms
150 kHz to 80MHz
1kV differential mode
2kV common mode
3 Vrms
150 kHz to 80MHz
Mains power quality should be that of a
typical commercial or hospital environment.
Portable and mobile RF communications
equipment should be used no closer to any
part of the medical LCD monitor, including
cables, than the recommended separation
distance calculated from the equation
applicable to the frequency of the transmitter.
Recommended separation distance : d
where Pis the maximum output power rating
of the transmitter in watts (W)
3. Guidance and manufacturer's declaration - electromagnetic immunity
This medical LCD monitor is intended for use in the electromagnetic environment specified below.
The customer or the user of monitor should assure that it is used in such an environment.
Immunity test
Power frequency
(50/60Hz)
magnetic field
IEC 61000-4-8
Voltage dips,
short interruptions
and voltage
variations on
power supply
input lines
IEC 61000-4-11
IEC 60601 Test level
3.0A/m
<5 % U T
(>95 % dip in U T)
for 0.5 cycle
40 % U T
(60 % dip in U T)
for 5 cycle
70 % U T
(30 % dip in U T)
for 25 cycle
<5 % U T
(<95 % dip in U T)
for 5 sec.
Compliance level
3.0A/m
<5 % U T
(>95 % dip in U T)
for 0.5 cycle
40 % U T
(60 % dip in U T)
for 5 cycle
70 % U T
(30 % dip in U T)
for 25 cycle
<5 % U T
(<95 % dip in U T)
for 5 sec.
Electromagnetic environment -guidance
Power frequency magnetic fields should be
at levels characteristic of a typical location
in a typical commercial or hospital
environment.
Main power quality should be that of a typical
commercial or hospital environment. If the
user of monitor requires continued operation
during power mains interruptions, it is
recommended that monitor be powered
from an uninterruptible power supply or a
battery.
NOTE : U¨ Tthe A.C. mains voltage prior to
application of the test level.

English - 14
Immunity test
Radiated RF
IEC 61000-4-3
IEC 60601 Test level
3 V/m
80.0 MHz to 2.5 GHz
Compliance level
3 V/m
80.0 MHz to 2.5 GHz
Electromagnetic environment -guidance
Recommended separation distance
where P is the maximum output power rating
of the transmitter in watts (W) according to
the transmitter manufacturer and d is the
recommended separation distance in meters
(m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site
survey, It should be less than the compliance
level in each frequency range.
80MHz to 800MHz
80MHz to 2.5GHz
4. Recommended separation distances between portable and mobile RF
communications equipment and this medical LCD monitor.
- The medical LCD monitor is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled.
The customer or the user of the monitor can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the medical LCD monitor as recommended below,
according to the maximum output power of the communications equipment.
150kHz to 80MHz
V1=3Vrms
Rated maximum
output power of
transmitter [W]
Separation distance according to frequency of transmitter[m]
80MHz to 800MHz
E1=3V/m
800MHz to 2.5GHz
E1=3V/m

15 - English
0.116
0.368
1.166
3.687
11.660
0.116
0.3687
1.1660
3.6872
11.6600
0.2333
0.7378
0.2333
0.7375
23.333
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in meters (m)can be estimated using the equation applicable to the frequency of the transmitter, where p is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1) At 80MHz and 800MHz, the separation distance for the higher frequency range applies.
NOTE 2) These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.

English - 16
19" FS-L190*D / FS-L190*DT Monitor
Accessories
Parts
User Manual D-SUB Cable
(6ft/1.8m) AC-DC Adaptor (JMW190KA1200F02) S-Video (Y/C) Cable (Option)
DVI Cable
(6ft/1.8m) BNC Cable
(6ft/1.8m) AC Power cord
(6ft/1.8/m US,UK,EU)
(Hospital Grade)
SCREW FH M3X6
SCREW BH M4X10 (Option)

17 - English
24" FS-L240*D / FS-L240*DT Monitor
Accessories
User Manual D-SUB Cable
(6ft/1.8m) AC-DC Adaptor (JMW1150KA2400F04) S-Video (Y/C) Cable (Option)
DVI Cable
(6ft/1.8m) BNC Cable
(6ft/1.8m) AC Power cord
(6ft/1.8/m US,UK,EU)
(Hospital Grade)
DC Cable Terminal
Male / female (Option)
SCREW FH M3X6 SCREW BH M4X10 (Option)

English - 18
26" FS-L260*D / FS-P260*D(LED) Monitor
Accessories
User Manual D-SUB Cable
(6ft/1.8m) AC-DC Adaptor (JMW1150KA2400F04)
(BPM150S24F10)
S-Video (Y/C) Cable
(Option)
DVI Cable
(6ft/1.8m) BNC Cable
(6ft/1.8m) AC Power cord
(6ft/1.8/m US,UK,EU)
(Hospital Grade)
DC Cable Terminal
Male / female (Option)
SCREW FH M3X6 SCREW BH M4X10 SCREW BHM4X6
(Option)

19 - English
32" FS-L320*D Monitor
Accessories
User Manual D-SUB Cable
(6ft/1.8m) AC-DC Adaptor (JMW1180KA2400F01) S-Video (Y/C) Cable (Option)
DVI Cable
(6ft/1.8m) BNC Cable
(6ft/1.8m) AC Power cord
(6ft/1.8/m US,UK,EU)
(Hospital Grade)
DC Cable Terminal
Male / female (Option)
SCREW FH M3X6 Remote controller Battery(AAA)
SCREW BH M4X10