FSR DV-MFSW-94 User manual

USER MANUAL
DV-MFSW-94
9x4 PRESENTATION MATRIX SWITCHER
244 Bergen Boulevard, Woodland Park, NJ 07424 Tel [phone] FAX [phone] Web
www.fsrinc.com
LIT1376

2
1 Proprietary Information
All information in this manual is proprietary to and the property of FSR Inc. This
publication is protected by the Federal Copyright Law, with all rights reserved. No part of
this document may be reproduced, transcribed, or transmitted, in any form or by any
means, without prior explicit written permission from FSR Inc.
Unpacking
The DV-MFSW-94 9x4 PRESENTATION MATRIX SWITCHER package includes the
following items;
DV-MFSW-94 9x4 PRESENTATION MATRIX SWITCHER
12VDC Power Supply with AC cord
USB-A to USB mini-B cable
RJ-45 to RJ-45 straight through cable
DB-9 Male to DB-9 Female
Set of Rack Mounting Ears with Hardware
Two 5-position Screw Down Terminal Plugs
User manual x 1
Cautions:
1. FSR logo is a trademark of FSR Inc.
2. HDMI is a trademark of HDMI licensing, LLC.
3. Specification may be changed without any notice in order to
improve the function of the product.
4. The design and specification of the product may be change
without any prior notice.

3
Table of Contents
1PROPRIETARY INFORMATION................................................................................................................2
1.1 SAFETY..........................................................................................................................................4
1.2 FEATURES.....................................................................................................................................5
1.3 FRONT PANEL...............................................................................................................................6
1.4 REAR PANEL.................................................................................................................................6
2ENVIRONMENTAL ....................................................................................................................................7
3FUNCTIONS OF THE PRODUCT .............................................................................................................7
3.1 FEATURES OF PRODUCT....................................................................................................................7
3.2 SYSTEM OPERATION AND CONFIGURATION DIAGRAM..........................................................................7
3.3 SPECIFICATIONS................................................................................................................................8
4OPERATION ..............................................................................................................................................9
5RS-232 PROTOCOL................................................................................................................................12
5.1 GENERAL NOTES ............................................................................................................................12
5.2 REQUEST/RESPONSE FORMAT.........................................................................................................12
5.3 COMMAND REQUEST SYNTAX:.........................................................................................................12
5.4 ACKNOWLEDGING RECEIPT OF COMMANDS......................................................................................12
5.5 ERROR RESPONSE..........................................................................................................................12
6COMMAND LIST:.....................................................................................................................................13
6.1 SET CON COMMAND ......................................................................................................................13
6.2 SET HDMIAUDIO OUTPUT COMMAND..............................................................................................14
6.3 SET HDMI EDID ............................................................................................................................14
6.4 SET INPUT SOURCE COMMAND ........................................................................................................15
6.5 SET STEREO AUDIO OUTPUT COMMAND...........................................................................................15
6.6 SET PRESET RECALL COMMAND......................................................................................................16
6.7 RESET DV-MFSW-94.....................................................................................................................16
6.8 SET SERIAL BAUD RATE .................................................................................................................16
6.9 SET IPADDRESS ............................................................................................................................17
6.10 GET UNIVERSAL STATUS COMMAND ................................................................................................17
6.11 GET OUTPUT CONNECTION STATUS .................................................................................................17
6.12 GET INPUT ASSIGNMENT STATUS .....................................................................................................18
6.13 GET AUDIO OUTPUT STATUS ...........................................................................................................18
6.14 INPUT OR OUTPUT TIMING STATUS ..................................................................................................19
6.15 RS232 SETTINGS ...........................................................................................................................19
6.16 LAN SETTINGS...............................................................................................................................20
7DV-MFSW-94 IP CONTROL....................................................................................................................21
8FIRMWARE UPGRADE INSTRUCTIONS...............................................................................................24
9LIMITED WARRANTY .............................................................................................................................27

4
1.1 SAFETY
Safety instructions and user manual should be read before the device is operated.
Safety and operating instructions should be retained for future reference.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
This product should be operated only from the type of power sources indicated on the label. If you
are not sure of the type of power supplied to your facility, consult your local power company. For
equipment intended to operate from battery power, or other source, refer to the user manual.
This equipment may be equipped with a 3-wire grounding-type plug, a plug having a third
(grounding) pin. This pin will only fit in to a grounding type power outlet. This is a safety feature. If
you are unable to insert the plug in to the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding-type plug.
Openings in the cabinet are provided for ventilation, to ensure reliable operation of the equipment
and to protect it from overheating. The openings should never be blocked.
Do not use damaged power cords or plugs or loose outlets. This may cause electrical shock or fire.
Do not stack heavy articles such as other equipment on this product.
Keep this device away from liquid, magnetic, inflammable substances.
Turn off power before connecting or disconnecting cables.

5
1.2 FEATURES
The Hybrid Presentation Matrix DV-MFSW-94 supports VGA, HDMI, DVI, YPbPr, S-Video and CVBS
signals. Signals from any of up to 9 sources can be sent simultaneously to as many as 4 HDMI or DVI
displays. HDCP (High-bandwidth Digital Content Protection) is supported from all digital sources to all
outputs.
Complies with DVI V1.0 and HDMI V1.3 standards
19” standard rack type case (3U)
Supports fiber optic and UTP transmitters for accessing sources at a distance from the unit.
Provides complete EDID management including more than 25 pre-programmed combinations and
the ability to learn new and non-standard EDID data sets.
Provides up to 20 switch program presets
HDCP (High-bandwidth Digital Content Protection) compliance for all output channels
Enhanced quality and color of digital signals
Supporting Functions:
Supports high resolution up to WUXGA(1920x1200), 480p~1080p
LCD status and setup window on the front panel
Control through:
• Front panel menu and display
• Control method through RS-232C COM port and TCP/IP
• Web server thru LAN (TCP/IP)
Electronic anomaly suppression circuitry protects the DV-MFSW-94 as well as connected devices.

6
1.3 FRONT PANEL
The functions of the switches are as follow.
Main power switch: Matrix power on/off
Menu Button: Access Main Menu
Arrows: Selecting the available functions.
Enter key: save current selection
Cancel key: cancel current selection
1.4 REAR PANEL
+12V DC: DC power +12V input port
SP: Service Port (Upgrade Firmware thru USB)
LAN: LAN (TCP/IP)
RS-232: RS-232C communication input port
Digital Video Inputs 1-4: HDMI with external Stereo Audio
Digital Video Inputs 5-7: CAT or Fiber Optic
Analog Video Inputs 8-9: RGB/YPbPr, CVBA, S-Video and Stereo Audio
Balanced Audio Inputs CH 1-2: Balanced Audio
Audio Out: Stereo Audio Output
OUTPUTS: DVI/HDMI & SPDIF Audio Outputs (OUTPUT 1~4)

7
2 Environmental
For installation, we recommend the following environments.
Below 85 F (30°C) of ambient temperature (Best condition)
Install and operate in the environment below 60% of ambient humidity (Best condition)
Use it in the environment of free of vibrations and dusts and in good ventilation condition
Recommend stabilized AC input power (Recommend to use AVR)
3 Functions of the product
3.1 Features of Product
The DV-MFSW-94 is a Hybrid matrix router that allows both analog and digital video sources to be reliably
routed to as many as four digital displays. The DV-MFSW-94 will adjust the output signals to the optimal
resolution for the connected display device. Please find below block diagram for better understanding.
Input signals can be selected for each output port by RS-232C, LAN (TCP/IP) or front panel menu.
3.2 System Operation and Configuration Diagram

8
3.3 Specifications
Input
1. 9 CH Sources
2. DVI/ HDMI Inputs (Input 1 – 4)
- Resolutions: PC (up to WUXGA), HDTV (up to 1080p)
- DVI 1.0 / HDMI 1.3v, HDCP
- Stereo Audio Max 1Vrms
3. CAT / Fiber Optical Inputs (Input 5-7)
- Resolutions: PC (up to WUXGA), HDTV (up to 1080p)
- HDMI 1.3v, HDCP
-CAT(Max50m)
- 2 Core Optical (Multi, Single Mode Fiber Optic Cable)
4. Analog Inputs (Input 8-9)
- 12-bit 170 MSPS ADC
- VGA to WUXGA and 1080p / 60Hz
- Signal Format: RGB, YPbPr, CVBS, S-Video
- Supporting Resolutions: RGB (up to WUXGA), YPbPr (480p – 1080p),
CVBS / S-Video (NTSC / PAL)
5. 2 CH Balanced Audio Inputs:
- Route to stereo audio output or embed in HDMI output Signals
Output
1. 4 CH HDMI/DVI Outputs
2. Scaled Outputs: Outputs digital video perfectly scaled for each connected display device.
- Resolutions: PC (up to WUXGA), HDTV (up to 1080p)
- Image Freeze
3. Optical Toslink, COAXIAL SPDiF Digital Audio
4. Stereo Audio Max 1Vrms Output (RCA)
Control
1. RS-232C 9600 – 115200 Bps
2. LAN, TCP/IP TELNET
Power: DC-12V, 6.6A, 25Watt / 35 Watt
Dimensions: 17.126” W X 10.630”D X 3.465” H (435mm W X 270mm D X 88mm H) (3RU)
Weight: 15.76 lb. (7.15 Kg)

9
4 Operation
1. MAIN MENU
Displays the timing (Resolutions) information of Inputs and
Outputs to output
Displays the timing (Resolutions) information of each output
channels using Left/Right arrow buttons.
2. MENU LIST
Press Menu button to get the list of Menus.
Select the function using UP/Down buttons
Press Enter button to go into more detail set up of the selected function.
3. OUTPUT CREATE SETUP
This section is to route Input Channels to outputs.
Select Output Channel using Left/Right buttons.
Select Input Channel using Up/Down button, and press Enter
button to save.
 Will display Input Config and Output Audio Config according to above channel selection.
4. INPUT CONFIG SETUP
This section is for setting up input configurations:
Selecting Audio sources thru input Channel 1 – 4
0: Auto Audio – Automatically detects audio input
1: HDMI Audio – HDMI Source Audio.
2: STEREO Audio – External Input Audio.
Selecting Video sources thru Input Channel 5 – 7
0: CAT-X IN 1: FIBER IN SET
Select Analog video sources thru Input Channel 8 – 9
0: VGA 1: YPbPr 2: CVBS 3: S-Video
Select the input channel using Left / Right buttons.
Select the source using up / down button, and press enter button to save.
5. OUTPUT TIMING SETUP
This section is for setting up Output Channel Timing (Resolutions):
Selecting the output channel using the Left / Right buttons.
Select the timing number using the up / down buttons, and press
enter button to save.
※Auto Time Set – CR94 read display such as TV, monitors EDID (if no picture, select default setting;
720p1080i)
* OUTPUT INFO VIEW *
[ OutPut: 1 2 3 4 ]
[ Input : 1 4 7 9 ]
[ 1920 x 1080p 60 ]
→1.OUTPUT CREATE
2.INPUT CONFIG
3.OUTPUT TIMING SET
4.OUTPUT AUDIO SET
→5.STEREO AUDIO SET
6.PRESET
7.PROGDUCT ID
8.RS232C CONFIG
→9. LAN CONFIG
10. INPUT EDID SET
11.INPUT INFO
12.SOFTWARE-
UPGRADE
-OUTPUT CREATE MODE-
[ OutPut: 1 2 3 4 ]
[ InPut : 1 4 7 9 ]
[ HDMI/DVI & AUDIO ]
-INPUT CONFIG SETUP-
[ 1 2 3 4 →]
[ 2 0 1 2 ]
[ 2:Stereo Audio ]
- OUTPUT TIMING -
[OutCH: 1 2 3 4 ]
[TimNo: 0 2 2 1 ]
[ Auto Time Set ]

10
6. PRESET
Selecting PRESET call/edit using up / down buttons.
- PRESET CALL
Select call number using up / down buttons, and press enter
button.
Will display PRESET VIEW on display.
- PRESET EDIT
Select the preset number using Left / Right buttons, and press
enter button.
Change the configuration using up / down buttons, and press
enter to save.
7. AUDIO OUTPUT SETUP
This Section is for setting up the output channel audio.
0:Source Audio 1:Balance Audio 1 2:Balance Audio 2
Selecting output channel using Left / Right buttons.
Select audio source using up / down buttons, press enter to
save.
8. STEREO AUDIO OUTPUT SETUP
This section is for setting up the Stereo Audio Output Source.
0 - 9: Input Channel Source Audio
1: Balance Audio 1
2: Balance Audio 2
Select audio source using Up/Down button and press enter to
save
9. PRODUCT ID SETUP
Select audio source using up / down buttons, and press enter
to save.
- P R E S E T -
1 . P R E S E T C a l l
2 . P R E S E T E d I t
- PRESET Call -
Call Num : 1
- PRESET Edit -
Edit Num : 1
- PRESET 1 Edit -
Output No : 1
InP No : InPS :
Out Tim : Aud :
- STEREO AUDIO OUT -
[Audio In: 11 ]
[ Balance Audio 2 ]
[ Change:Up/Down ]
- PRODUCT ID SETUP -
[ ID Data: 10 ]
[ Edit:Up/Down ]
[ Save:Enter ]
- P R E S E T -
1 . P R E S E T C a l l
2 . P R E S E T E d I t