FSR DV-MFSW-94XT User manual

USER MANUAL
DV-MFSW-94
9x4 PRESENTATION MATRIX SWITCHER
244 Bergen Boulevard, Woodland Park, NJ 07424 Tel [phone] FAX [phone] Web
www.fsrinc.com
LIT1376B

2

3
1 Proprietary Information
All information in this manual is proprietary to and the property of FSR Inc. This
publication is protected by the Federal Copyright Law, with all rights reserved. No part of
this document may be reproduced, transcribed, or transmitted, in any form or by any
means, without prior explicit written permission from FSR Inc.
Unpacking
The DV-MFSW-94 9x4 PRESENTATION MATRIX SWITCHER package includes the
following items;
DV-MFSW-94 9x4 PRESENTATION MATRIX SWITCHER
12VDC Power Supply with AC cord
USB-A to USB mini-B cable
RJ-45 to RJ-45 straight through cable
DB-9 Male to DB-9 Female
Set of Rack Mounting Ears with Hardware
Two 5-position Screw Down Terminal Plugs
User manual
Cautions:
1. FSR logo is a trademark of FSR Inc.
2. HDMI is a trademark of HDMI licensing, LLC.
3. Specification may be changed without any notice in order to
improve the function of the product.
4. The design and specification of the product may be change
without any prior notice.

4

5
Table of Contents
1PROPRIETARY INFORMATION................................................................................................................3
1.1SAFETY..........................................................................................................................................6
1.2FEATURES.....................................................................................................................................7
1.3FRONT PANEL...............................................................................................................................8
1.4REAR PANEL.................................................................................................................................8
2ENVIRONMENTAL ....................................................................................................................................9
3FUNCTIONS OF THE PRODUCT .............................................................................................................9
3.1FEATURES OF PRODUCT....................................................................................................................9
3.2SYSTEM OPERATION AND CONFIGURATION DIAGRAM..........................................................................9
3.3SPECIFICATIONS..............................................................................................................................10
4OPERATION ............................................................................................................................................ 11
5RS-232 PROTOCOL................................................................................................................................14
5.1GENERAL NOTES ............................................................................................................................14
5.2REQUEST/RESPONSE FORMAT.........................................................................................................14
5.3COMMAND REQUEST SYNTAX:.........................................................................................................14
5.4ACKNOWLEDGING RECEIPT OF COMMANDS......................................................................................14
5.5ERROR RESPONSE..........................................................................................................................14
6COMMAND LIST:.....................................................................................................................................15
6.1SET CON COMMAND ......................................................................................................................15
6.2SET HDMIAUDIO OUTPUT COMMAND..............................................................................................16
6.3SET HDMI EDID ............................................................................................................................16
6.4SET INPUT SOURCE COMMAND ........................................................................................................17
6.5SET STEREO AUDIO OUTPUT COMMAND...........................................................................................17
6.6SET PRESET RECALL COMMAND......................................................................................................18
6.7RESET DV-MFSW-94.....................................................................................................................18
6.8SET SERIAL BAUD RATE .................................................................................................................18
6.9SET IPADDRESS ............................................................................................................................19
6.10GET UNIVERSAL STATUS COMMAND ................................................................................................19
6.11GET OUTPUT CONNECTION STATUS .................................................................................................19
6.12GET INPUT ASSIGNMENT STATUS.....................................................................................................20
6.13GET AUDIO OUTPUT STATUS ...........................................................................................................20
6.14INPUT OR OUTPUT TIMING STATUS ..................................................................................................21
6.15RS232 SETTINGS ...........................................................................................................................21
6.16LAN SETTINGS...............................................................................................................................22
6.17ASPECT SETTINGS........................................................................................................................22
7DV-MFSW-94 IP CONTROL....................................................................................................................23
8FIRMWARE UPGRADE INSTRUCTIONS...............................................................................................26
9LIMITED WARRANTY .............................................................................................................................29

6
1.1 SAFETY
Safety instructions and user manual should be read before the device is operated.
Safety and operating instructions should be retained for future reference.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
This product should be operated only from the type of power sources indicated on the label. If you
are not sure of the type of power supplied to your facility, consult your local power company. For
equipment intended to operate from battery power, or other source, refer to the user manual.
This equipment may be equipped with a 3-wire grounding-type plug, a plug having a third
(grounding) pin. This pin will only fit in to a grounding type power outlet. This is a safety feature. If
you are unable to insert the plug in to the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding-type plug.
Openings in the cabinet are provided for ventilation, to ensure reliable operation of the equipment
and to protect it from overheating. The openings should never be blocked.
Do not use damaged power cords or plugs or loose outlets. This may cause electrical shock or fire.
Do not stack heavy articles such as other equipment on this product.
Keep this device away from liquid, magnetic, inflammable substances.
Turn off power before connecting or disconnecting cables.

7
1.2 FEATURES
The Hybrid Presentation Matrix DV-MFSW-94 supports VGA, HDMI, DVI, YPbPr, S-Video and CVBS
signals. Signals from any of up to 9 sources can be sent simultaneously to as many as 4 HDMI or DVI
displays. HDCP (High-bandwidth Digital Content Protection) is supported from all digital sources to all
outputs.
Complies with DVI V1.0 and HDMI V1.3 standards
19” standard rack type case (3U)
Supports fiber optic and UTP transmitters for accessing sources at a distance from the unit.
Provides complete EDID management including more than 25 pre-programmed combinations and
the ability to learn new and non-standard EDID data sets.
Provides up to 20 switch program presets
HDCP (High-bandwidth Digital Content Protection) compliance for all output channels
Enhanced quality and color of digital signals
Supporting Functions:
Supports high resolution up to WUXGA(1920x1200), 480p~1080p
LCD status and setup window on the front panel
Control through:
• Front panel menu and display
• Control method through RS-232C COM port and TCP/IP
• Web server thru LAN (TCP/IP)
Electronic anomaly suppression circuitry protects the DV-MFSW-94 as well as connected devices.

8
1.3 FRONT PANEL
The functions of the switches are as follow.
Main power switch: Matrix power on/off
Menu Button: Access Main Menu
Arrows: Selecting the available functions.
Enter key: save current selection
Cancel key: cancel current selection
1.4 REAR PANEL
+12V DC: DC power +12V input port
SP: Service Port (Upgrade Firmware thru USB)
LAN: LAN (TCP/IP)
RS-232: RS-232C communication input port
Digital Video Inputs 1-4: HDMI with external Stereo Audio
Digital Video Inputs 5-7: CAT or Fiber Optic
Analog Video Inputs 8-9: RGB/YPbPr, CVBA, S-Video and Stereo Audio
Balanced Audio Inputs CH 1-2: Balanced Audio
Audio Out: Stereo Audio Output
OUTPUTS: DVI/HDMI & SPDIF Audio Outputs (OUTPUT 1~4)

9
2 Environmental
For installation, we recommend the following environments.
Below 85 F (30°C) of ambient temperature (Best condition)
Install and operate in the environment below 60% of ambient humidity (Best condition)
Use in an environment free of vibrations, dust and in a well-ventilated space.
Recommend stabilized AC input power (Recommend to use AVR)
3 Functions of the product
3.1 Features of Product
The DV-MFSW-94 is a Hybrid matrix router that allows both analog and digital video sources to be reliably
routed to as many as four digital displays. The DV-MFSW-94 will adjust the output signals to the optimal
resolution for the connected display device. Please find below block diagram for better understanding.
Input signals can be selected for each output port by RS-232C, LAN (TCP/IP) or front panel menu.
3.2 System Operation and Configuration Diagram

10
3.3 Specifications
Input
1. 9 CH Sources
2. DVI/ HDMI Inputs (Input 1 – 4)
- Resolutions: PC (up to WUXGA), HDTV (up to 1080p)
- DVI 1.0 / HDMI 1.3v, HDCP
- Stereo Audio Max 1Vrms
3. CAT / Fiber Optical Inputs (Input 5-7)
- Resolutions: PC (up to WUXGA), HDTV (up to 1080p)
- HDMI 1.3v, HDCP
-CAT(Max50m)
- 2 Core Optical (Multi, Single Mode Fiber Optic Cable)
4. Analog Inputs (Input 8-9)
- 12-bit 170 MSPS ADC
- VGA to WUXGA and 1080p / 60Hz
- Signal Format: RGB, YPbPr, CVBS, S-Video
- Supporting Resolutions: RGB (up to WUXGA), YPbPr (480p – 1080p),
CVBS / S-Video (NTSC / PAL)
5. 2 CH Balanced Audio Inputs:
- Route to stereo audio output or embed in HDMI output Signals
Output
1. 4 CH HDMI/DVI Outputs
2. Scaled Outputs: Outputs digital video perfectly scaled for each connected display device.
- Resolutions: PC (up to WUXGA), HDTV (up to 1080p)
3. Optical Toslink, COAXIAL SPDiF Digital Audio
4. Stereo Audio Max 1Vrms Output (RCA)
Control
1. RS-232C 9600 – 115200 Bps
2. LAN, TCP/IP TELNET
Power: DC-12V, 6.6A, 25Watt / 35 Watt
Dimensions: 17.126” W X 10.630”D X 3.465” H (435mm W X 270mm D X 88mm H) (3RU)
Weight: 15.76 lb. (7.15 Kg)