FujiFilm Mount Adapter Operating manual

BL01765-200
Using a Mount Adapter
Thank you for buying a FUJIFILM product. The FUJIFILM M MOUNT ADAPTER
allows M-mount lenses to be mounted on the X-Pro1, which in turn can process
images taken with M-mount lenses as required to maintain image quality and
correct for a variety of eects. Note that using the M-mount adapter requires
camera rmware version 1.10 or later; check the rmware version before pro-
ceeding.
MOUNT ADAPTER SETTING Options
Pressing the function button on the mount adapter displays lMOUNT ADAPTER SETTINGS options.
g g
Choosing a Focal Length
If the lens has a focal length of 21, 24, 28, or 35mm, choose a matching option in the
menu at right. For other lenses, select option 5 or 6 to display the menu shown below
at left, press the selector right to display focal length settings, and use the selector to
enter the focal length.
LENS 4
LENS 5
LENS 2
LENS 3
LENS 6
LENS 1
MOUNT ADAPTOR SETTING
DISTORTION CORRECTION
FOCAL LENGTH SETTING
PERIPHERAL ILLUMINATION CORRECTION
COLOR SHADING CORRECTION
050mm
2
1
9
8
LENS 5
INPUT FOCAL LENGTH
SET CANCEL
21 mm
24 mm
28 mm
35 mm
50 mm
75 mm
SET
LENS 4
LENS 5
LENS 2
LENS 3
LENS 6
LENS 1
MOUNT ADAPTOR SETTING
RThe camera adjusts the size of the bright frame in the optical viewnder according to lens focal length.
17mm or less
17mm or less
18mm–60mm
18mm–60mm
61mm or more
61mm or more
200
2000
P
F5.6
200
2000
P
F5.6
200
2000
P
F5.6
Bright frame not displayed. Both white and blue frames are dis-
played, the former for innity and
the latter for distances of about
2m/6.6ft.
RThe camera does not automati-
cally correct for parallax.
Both red and blue frames are dis-
played. The frames are not adjusted
for focal length, making the elec-
tronic viewnder the recommend-
ed choice for framing pictures.

Distortion Correction
Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION
distortion.
OFF
PINCUSHION WEAK
BARREL MEDIUM
BARREL WEAK
PINCUSHION MEDIUM
BARREL STRONG
LENS
5 DISTORTION CORRECTION
SET CANCEL
❚❚Barrel Distortion
Choose BARREL STRONG, BARREL MEDIUM, or BARREL WEAK to correct barrel distortion. In barrel distortion,
vertical and horizontal lines not passing through the center of the image bow outwards; correction reduces this
distortion as shown below.
❚❚Pincushion Distortion
Choose PINCUSHION STRONG, PINCUSHION MEDIUM, or PINCUSHION WEAK to correct pincushion distortion. In
pincushion distortion, vertical and horizontal lines not passing through the center of the image bow inwards; cor-
rection reduces this distortion as shown below.
RTo determine the amount required, adjust distortion correction while taking photos of graph paper or other objects
featuring repeating vertical and horizontal lines, such as the windows in a high-rise.

g
Color Shading Correction
Color (shading) variations between the center and edges of the frame can be adjusted
separately for each corner.
SET CANCEL
To use color shading correction, follow the steps below.
1Choose a corner.
Rotate the command dial to choose a corner. The selected corner is indicated by a
triangle.
SET CANCEL
2Adjust shading.
Use the selector to adjust shading until there is no visible dierence in color be-
tween the selected corner and the center of the image. Press the selector left or
right to adjust colors on the cyan–red axis, up or down to adjust colors on the blue–
yellow axis. There are a total of 19 positions available on each axis.
SET CANCEL
RTo determine the amount required, adjust color shading correction while taking photos of blue sky or a sheet of gray
paper.
Peripheral Illumination Correction
Choose from values between –5 and +5. Choosing positive values increases peripher-
al illumination, while choosing negative values reduces peripheral illumination. Posi-
tive values are recommended for vintage lenses, negative values to create the eect
of images taken with an antique lens or a pinhole camera.
0
SET CANCEL
RTo determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a
sheet of gray paper.

Using a Mount Adapter: Cautions
• Attaching a mount adapter enables mSHOOT WITHOUT LENS and hides the distance indicator in the standard
displays for the LCD monitor and optical/electronic viewnder.
• Before checking focus, set the focus mode selector to M.
• If you nd it hard to see the display in the viewnder when a mount adapter is attached, follow these steps to
increase viewnder brightness:
1Use the VIEW MODE button to enable automatic display selection using the eye sensor.
2Press the Qbutton.
3Put your eye to the viewnder.
4Highlight JLCD BRIGHTNESS with the selector and use the command dial to adjust brightness.