FujiFilm GF50mmF3.5 R LM WR User manual

FUJINON LENS
GF50mmF3.5 R LM WR
OWNER'S MANUAL
BL00005025-100 日本語
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
NEDERLANDS
SVENSKA
NORSK
SUOMI
РУССКИЙ
ITALIANO
POLSKI
中文简
中文繁體
한글
ﻲﺑﺮﻋ
DANSK

EN-1 ENGLISH
For Your Safety
Be sure to read these notes
before use
Safety Notes
Thank you for your purchase of this prod-
uct. For repair, inspection, and internal
testing, contact your Fujifilm dealer.
• Make sure that you use the lens correctly.
Read these safety notes and the camera
Owner’s Manual carefully before use.
• After reading these safety notes, store
them in a safe place.
About the Icons
The icons shown below are used in this
document to indicate the severity of the
injury or damage that can result if the in-
formation indicated by the icon is ignored
and the product is used incorrectly as a
result.
WARNING
This icon indicates that
death or serious injury can
result if the information is
ignored.
CAUTION
This icon indicates that
personal injury or material
damage can result if the
information is ignored.
The icons shown below are used to indi-
cate the nature of the instructions which
are to be observed.
Triangular icons tell you that this
information requires attention (“Im-
portant”).
Circular icons with a diagonal bar
tell you that the action indicated is
prohibited (“Prohibited”).
Filled circles with an exclamation
mark indicate an action that must
be performed (“Required”).
WARNING
WARNING
Do not use in the
bathroom or shower
Do not immerse in or expose to
water. Failure to observe this
precaution can cause a fire or
electric shock.
Do not disassemble
Do not disassemble (do not open
the case). Failure to observe
this precaution can cause fire,
electric shock, or injury due to
product malfunction.
Do not touch internal
parts
Should the case break open as
the result of a fall or other ac-
cident, do not touch the exposed
parts. Failure to observe this
precaution could result in
electric shock or in injury from
touching the damaged parts.
Remove the camera battery
immediately, taking care to
avoid injury or electric shock,
and take the product to the
point of purchase for consul-
tation.

EN-2ENGLISH
WARNING
WARNING
Do not place on unstable sur-
faces. The product may fall,
causing injury.
Do not view the sun through
the lens or camera viewnders.
Failure to observe this precau-
tion can cause permanent
visual impairment.
CAUTION
CAUTION
Do not use or store in locations
that are exposed to steam, or
smoke or are very humid or
extremely dusty. Failure to
observe this precaution can
cause fire or electric shock.
Do not leave in direct sunlight
or in locations subject to very
high temperatures, such as in
a closed vehicle on a sunny day.
Failure to observe this precau-
tion can cause fire.
CAUTION
CAUTION
Keep out of the reach of small
children. This product could
cause injury in the hands of
a child.
Do not handle with wet hands.
Failure to observe this precau-
tion can cause electric shock.
Keep the sun out of the frame
when shooting backlit subjects.
Sunlight focused into the
camera when the sun is in or
close to the frame can cause
fi r e o r b u r n s .
When the product is not in use,
replace the lens caps and store
out of direct sunlight. Sunlight
focused by the lens can cause
fi r e o r b u r n s .
Do not carry the camera or lens
while they are attached to a
tripod. The product can fall
or strike other objects, caus-
ing injury.
For Customers in the U.S. A.
For Customers in the U.S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement: This device complies with Part 15 of
the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause
harmful interference, and (2) this device must ac-
cept any interference received, including interfer-
ence that may cause undesired operation.
CAUTION: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protec-
tion against harmful interference in a residential in-
stallation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that inter-
ference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be de-
termined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between
the equipment and receiver.

EN-3 ENGLISH
• Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
• You are cautioned that any changes or modifi-
cations not expressly approved in this manual
could void the user’s authority to operate the
equipment .
Notes on the Grant: To comply with Part 15 of the
FCC Rules, this product must be used with a
Fujifilm-specified ferrite-core A/V cable, USB cable,
and DC supply cord.
For Customers in Canada
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies
with Canadian ICES-003.
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water (excluding
waterproof products).
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as ra-
diators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
• Only use attachments/accessories specified by
the manufacturer.
• Unplug this apparatus during lightning storms or
when unused for long periods of time.
• Refer all servicing to qualified service personal.
Servicing is required when the apparatus has
been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the ap-
paratus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Disposal of Electrical and Electronic Equipment in
Disposal of Electrical and Electronic Equipment in
Private Households
Private Households
In the European Union, Norway, Iceland
and Liechtenstein: This symbol on the
product, or in the manual and in the
warranty, and/or on its packaging in-
dicates that this product shall not be
treated as household waste. Instead
it should be taken to an applicable
collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative conse-
quences to the environment and human health,
which could otherwise be caused by inappropriate
waste handling of this product.
The recycling of materials will help to conserve nat-
ural resources. For more detailed information about
recycling this product, please contact your local city
office, your household waste disposal service or the
shop where you purchased the product.
In Countries Outside the European Union, Norway,
Iceland and Liechtenstein: If you wish to discard this
product, including the batteries or accumulators,
please contact your local authorities and ask for the
correct way of disposal.
Australian RCM

EN-4ENGLISH
Before Using This Product
The lens may not perform as expected and
some features may not be available with older
versions of the camera rmware. Be sure to up-
date the camera rmware to the latest version.
Instructions on viewing the camera rmware
version and updating camera rmware are
available from the following website:
http://www.fujifilm.com/support/digital_cameras/
software/#firmware
If you do not have access to a computer, sup-
port is available from the local distributor
listed in the “FUJIFILM Worldwide Network”
material provided with your camera.
Product Care
• When using a lens hood, do not pick up or
hold the camera using only the hood.
• Keep the lens signal contacts clean.
• Use a blower to remove dust and lint from the
glass surfaces of the lens or lter. To remove
smudges and ngerprints, apply a small
amount of lens cleaner to a soft, clean cotton
cloth or lens-cleaning tissue and clean from
the center outwards using a circular motion,
taking care not to leave smears or touch the
glass with your ngers.
• Never use organic solvents such as paint
thinner or benzene to clean the lens.
• Attach the front and rear caps when the lens
is not in use.
• Store the lens and lter in cool, dry locations
to prevent mold and rust. Do not store in
direct sunlight or with naphtha or camphor
moth balls.
• Keep the lens dry. Rusting can cause irrepara-
ble damage. Wipe o rain and water droplets.
• Leaving the lens in extremely hot locations
could cause damage or warping.

EN-5 ENGLISH
Parts of the Lens
GF50mmF3.5 R LM WR
AHood cap
BLens hood
CFocus ring
DAperture ring lock release
EMounting marks (focal length)
FAperture ring
GLens signal contacts
HFront lens cap
IRear lens cap
QThe lens mount includes a rubber ring to ensure that the lens
remains dust- and splash-proof. The ring can be replaced for
a fee at any Fujifilm service center.

EN-6ENGLISH
Supplied Accessories
• Front lens cap
• Rear lens cap
• Lens hood
• Hood cap
• Lens wrapping cloth
Attaching the Lens
See the camera manual for information
on attaching and removing lenses.
QThis lens is for use exclusively with FUJIFILM G mounts and
can not be used with X mounts.
Removing the Caps
Remove the caps as shown.

EN-7 ENGLISH
Attaching the Hood
When attached, lens hoods reduce glare and
protect the front lens element. Use the hood
cap in place of the front lens cap to cap the
lens with the hood in place.
Warning
Warning
If you attach the hood too tightly after attaching a lter to the lens, the lter may remain stuck to the hood when
the hood is removed. Do not attempt to forcibly separate the hood and lter, as the lter threads could injure your hands. Cover
both the hood and lter with silicone jar openers or the like and unscrew them using the palms of your hands.

EN-8ENGLISH
Aperture ring
Rotate the lens aperture ring to choose the aperture (f-number).
AC ( ): Set aperture to the value chosen with the
camera command dial.
BA ( ): Set aperture to the value chosen automat-
ically by the camera.
COther values ( ): Set aperture to the selected
value.
RTo select Cor A, or to select another value after selecting Cor A, press the aper-
ture ring lock release while rotating the aperture ring.
11162232AC
Aperture ring lock
release
Aperture ring

EN-9 ENGLISH
Specications
Type GF50mmF3.5 R LM WR
Lens construction 9 elements in 6 groups (includes 1 aspherical element)
Focal length (35mm format equivalent)f=50mm (40mm)
Angle of view 57.4°
Max. aperture f/3.5
Min. aperture f/32
Aperture control
Number of blades 9 (rounded diaphragm opening)
Stop size ⁄EV (20 stops)
Focus range (measured from focal plane) 0.55 m – infinity
Max. magnication 0.1×
External dimensions: Diameter × Length* (approx.)
* distance from front of lens to lens mount ange
⌀84×48mm
Weight* (approx.)
* excluding caps and hoods
335g
Filter size ⌀62mm
QImprovements may result in unannounced changes to specifications and appearance.
QOwing to how this lens is constructed, the “Distance indicator” displayed by the camera may in some cases differ from the actual
focus distance. Use the “Distance indicator” as a guide only.
RThis lens uses linear motors to ensure fast and accurate auto focus while maintaining the highest image quality. When the camera
is turned off, the lens is disconnected from the camera body, or the playback feature is turned on, there may be an audible sound
and slight physical vibration due to the linear motor’s magnets being disengaged. This is perfectly normal and will not negatively
affect image quality or lens performance.