FujiFilm X100V User manual

FUJIFILM X100V Lens HoodUser Manualwww.yconionmall.comYC.Onionyc.onionYC OnionFollow us for more!yconionfilmProduct Overview1Adapter RingLens HoodLens Cap

21. Remove the lens ring of the camera.2. Remove the front lens cap of the lens hood.3Instructions

453. Hold the inner and outer side of adapter ring with one hand, unscrew the lends hood with the other hand.4. Install the adapter ring.

675. Install the 49mm filter (not included, and the frame can't be thicker than 4.5mm ).6. Install the lens hood.

87. Slightly loosen the adapter ring, adjust the lens hood to the middle and then tighten it again.9DISCLAIMER1. The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect or third-party losses).2. For any unknown sources of acquitting this product, we will not be at any services.3. The updating and changes of product firmware ano program may cause changes in function descriptions in this user manual, please read the instructions carefully before upgrading the firmware and use the correspond- ing user manual.4. There may be a description that does not conform to this specification after firmware upgrade of the product Please be subject to the latest product information which is issued in official website.5. The Company reserves all rights of interpretation to this product.

YoutubebilibiliWarranty Information10X100V Lens Hood-UM-1.0Client InfoProduct InformationDate of ManufactureWarranty PeriodNameE-Mail AddressProduct NameProduct ModelPhoneAddressWarranty Regulations1.The warranty is guaranteed for 1 year from the date of purchase；2.Some states or countries have no limitations on how long your confidentiality is guaranteed, so the above warranty period may not apply.3. Unauthorized disassembly or damage caused by users are not covered by warranty.