FujiFilm X100F User manual

DIGITAL CAMERA
X100F
New Features Guide
Version 2.00
Features added or changed as a result of rmware updates may no longer match the
descriptions in the documentation supplied with this product. Visit our website for
information on the updates available for dierent products:
http://www.fujifilm.com/support/digital_cameras/software
EN
BL00004959-200

ENGLISH
Contents
Contents
The following changes or additions have been made to features described in the X100F owner’s manual.
No.
No.
Description
Description
X100F
X100F
P
P
See
See
P
P
Ver.
Ver.
1
1The focus stick can be used to change focus areas when the display is zoomed in during MF assist.
69
69
EN-1
EN-1
2.00
2.00
2
2The focus stick can be used to change focus areas when the display is zoomed in during checking
focus.
3
3An OFF option has been added to DBUTTON/DIAL SETTING> CONTROL RING SETTING in the
setup menu.
122
122
EN-2
EN-2
4
4A DCONNECTION SETTING> PC CONNECTION MODE item has been added to the setup menu.
126
126
EN-2
EN-2
5
5In addition to the instax SHARE printers listed in “Accessories from FUJIFILM”, the camera now sup-
ports the SP-3.
142
142
EN-3
EN-3
6
6Third-party studio ash commanders compatible with the FUJIFILM ash system can now be used.
144
144
EN-3
EN-3

EN-1ENGLISH
Changes and Additions
Changes and Additions
Focus Mode
Focus Mode
X100F Owner’s Manual: P69
Checking Focus
Checking Focus
To zoom in on the current focus area for precise focus, press the
center of the rear command dial. Press the center of the rear com-
mand dial again to cancel zoom. In manual focus mode, zoom can
be adjusted by rotating the rear command dial when STANDARD
or FOCUS PEAK HIGHLIGHT is selected for GAF/MF SETTING>
MF ASSIST, while if ON is selected for GAF/MF SETTING> FOCUS
CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated. Focus
area selection using the focus stick is available during focus zoom. Focus zoom is not available in focus mode
Cor when GAF/MF SETTING> PRE-AF is on or an option other than rSINGLE POINT is selected for AF
MODE.
M M

EN-2 ENGLISH
Changes and Additions
■ DBUTTON/DIAL SETTING
X100F Owner’s Manual: P122
CONTROL RING SETTING
CONTROL RING SETTING
Set functions assigned to the control ring.
Options: DEFAULT/WHITE BALANCE/FILM SIMULATION/DIGITAL TELE-CONV./OFF
■ DCONNECTION SETTING
X100F Owner’s Manual: P126
PC CONNECTION MODE
PC CONNECTION MODE
Adjust settings for connection to a computer.
Option
Option
Description
Description
USB CARD READER
USB CARD READER
Connecting the camera to a computer via USB automatically enables data transfer mode, al-
lowing data to be copied to the computer. The camera functions normally when not con-
nected.
USB RAW CONV./BACKUP RESTORE
USB RAW CONV./BACKUP RESTORE
Connecting the camera to a computer via USB automatically enables USB RAW conversion/
backup restore mode. The camera functions normally when not connected.
• USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the camera’s image processing
engine to rapidly convert RAW les to high-quality JPEG images.
• BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load camera settings. Recon-
gure the camera in an instant or share settings with other cameras of the same type.

EN-3ENGLISH
Changes and Additions
Accessories from FUJIFILM
Accessories from FUJIFILM
X100F Owner’s Manual: P142
instax SHARE printers
instax SHARE printers
SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on
instax lm.
Using Shoe-Mounted Flash Units
Using Shoe-Mounted Flash Units
X100F Owner’s Manual: P144
Third-party studio ash commanders compatible with
the FUJIFILM ash system can now be used. For more
information, see the documentation provided your stu-
dio ash unit.

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html