FujiFilm HSs18x5.5B RM/RD User manual

DIGIPOWER
In order to enhance the newest optical design technology,
Fujinon has developed the digital servo control system
DIGI POWER offering advanced performance of its zoom
lenses. In addition to improved specification and performance
the utilization of digital circuitry in our DIGI POWER
product line has made many new features available that
were virtually impossible in the past. DIGI POWER lenses
provide for vastly improved accuracy and repeatability over
previous designs and enable custom control parameters to be
memorized for individual camera operator’s preferences. An
optional 16 bit processor for zoom, focus and iris is available for
applications requiring a high degree of accuracy.
QUICKZOOM speed is 0.6sec. / .07 sec.* from end to end.
QUICKZOOM provides a rapid zoom movement to the
telephoto position to check focus by the simple push of a
button. Releasing the button returns the lens to the
previously selected zoom position. Furthermore, by setting
the switch, QUICKZOOM can be performed remotely from
zoom rate demand units.
*0.6sec. : Studio and Field lens
0.7sec. : ENG/EFP lens
QUICKZOOM solves the problem of having to reframe a
shot after checking focus. This exclusive feature is a
standard component on all of DIGI POWER lenses.
Utilizing the QUICKZOOM function can be an extremely
time saving and productive production tool, by allowing a
quick check if focus after a framed shot has been established.
Simply press the Q-Z button and the lens zooms in tight at
maximum speed, check focus and release the Q-Z button. The
lens zooms out to the pre-selected shot automatically. No
more guess work as to what the framed shot was prior to
checking focus.
ONE SHOT PRESET
Zoom and focus can be preset and
memorized in advance at a selected
position. One touch of the switch during
shooting will instantly return to the
memorized position for time saving
production.
Frame your shot. Press Q-Z button. Lens zooms back
to original frame
in full focus.
Lens automatically
zooms in.
Check focus and
release Q-Z button.
ZOOM LIMIT
The zoom limit function can be used
in the servo operational mode. By
using this function, the zoom move-
ment toward both the wide side and
the telephoto side can be limited. An
override switch quickly returns the
lens to normal mode.
Standard on: DIGI POWER Studio and Field lens, DIGIPOWER ENG / EFP lens
AUTO-CRUISING ZOOM
Pressing the C-Z button while zooming will fix the zoom
speed at the existing rate. Pressing the seesaw switch a
second time slightly will return the zoom speed to normal.
Standard on: DIGI POWER Studio and Field lens, DIGIPOWER ENG / EFP lens
ZOOM MAXIMUM SPEED
ADJUSTMENT
The maximum zooming speed
obtained when pressing the seesaw
switch to the end can be adjusted.
16 BIT ACCURACY FOR
REMOTE CONTROL
Remote control of zoom, focus and iris
for all DIGI POWER lenses is possible
via 13 bit serial digital connection.
Optional 16 bit processing is available
for more accurate positioning in virtual
studios and other applications.
ACCESSORY COMPATIBILITY
Analog control accessories can be used
with the DIGI POWER lens. (Some
functions may be limited.)
ZOOM MODE SELECT
A zoom mode switch provides the option to
change the zoom response from “normal”
to more sensitive on the wide or telephoto
side. With the 3-zoom mode (10-zoom
mode on ENG/EFP) the user can select the
most suitable fine touch. These zooming
mode settings are ideal when switching
between productions such as drama and
sports.
HSs18x5.5B RM/RD*
LENS HSs18x5.5B RM/RD*
Zoom Ratio / Format 18X / 1/2"
Focal Length 5.5 to 100 mm
—
Maximum Relative 1:1.4 (5.5 ~ 77 mm)
Aperture 1:1.8 (100 mm)
Maximum Photometric 1:1.5 (5.5 ~ 77 mm)
Aperture T-No. 1:1.9 (100 mm)
Angular Field of View
16:9 Aspect Ratio
M.O.D. from Image Plane 0.84 m
M.O.D. from Front of Lens 0.60 m
Object Dimensions
at M.O.D.
Filter Sizeø 82 mm P=0.75
Dia ø x Length (w/o Hood) ø85 x 206.6 mm
Weight (w/o Hood) 1.58 kg (RM) / 1.60 kg (RD)
Options 16 Bit Encoder
Features Inner Focus / Quick Zoom / Zoom Limit
5.5 mm64° 43’ x 39° 14’
100 mm4° 00’ x 2° 15’
5.5 mm741 x 417 mm
100 mm43 x 24 mm
Extender
*RD contain servos for zoom and focus.
For Sales Contact Information go to
www.Fujinon.com

ACCESSORIES: HD & SD ENG/EFP
THREE-MODE FINE
FOCUS
By shifting the sensitivity from
the wide side to the telephoto
side of the focus range, this
control provides more precise
focusing
for studio
or sports
productions.
A. CFC-990
Flex Cable
B. FMM-3B/6B
Manual Module
C. ZMM-6
Manual Module
D. EBF-1 Focus Cable
E. MCA-6
F. ERD-20A-A02
Zoom Demand
G. FSP-13G
Focus Positional
Module
H. EPD-4A-E02
I. CZH-14
Focus Handle
J. CFH-11
Focus Handle
K. MCA-7
Mounting Clamp
L.
EPD-20A-A01/A02
Focus Demand
M.ERD-10A-D01
Zoom Demand
N. ALH-117A-02A
Support for
HA36x /A36x
HA42x
ROTATING CONTROL ANGLEMOD
INFINITY
CONVENTIONAL
TYPE
9 PIN CONNECTOR
SA-206-A-005
SERIAL DIGITAL
REMOTE CONTROL
BY PC
Remote control of zoom, focus
and iris for Digipower lenses is
possible via serial digital link,
providing accurate positioning
for virtual studio and other
applications requiring digital
precision.
A. B.
F. G.
L.
I.
J.
E.
H.
D.
M.
K.
C.
VTR
Switch
Zoom Speed
Control Knob
One Shot
Preset
Indicator
One Shot
Preset Switch
Quickzoom
Switch
Retur n
Switch
Quickzoom
Switch
Reverse
Switch
Focus/Iris
Control Select
Switch
Focus/Iris
Control Knob
Thumb
Ring
*New Digital features only available on ERM/ERD-M/S.
ERD-10A-D01
DIGI ZOOM DEMAND*
N.
Note: ERD-20A-A02 (F) and EPD-20A-A02 (L) replace the ERD-T22 and EPD-2CA.
STANDARD REAR CONTROL KITS
FMM-6B
FMM-3B 12 PIN
ERD-10A-D01
MCA-7 MCA-6B
CFH-11
CFC-12-990
FMM-6B
FMM-3B
CFC-12-990
MCA-7 MCA-7
CZH-14
CFH-11
CFC-12-990
ZMM-6
SS-13A Servo Focus/Servo Zoom
For use with ERD type lenses.
*Specify camera type
**FMM-3C for use on HA36x, HA42x and HA25x
FMM-6B
FMM-3B
12 PIN
ERD-20A-A02
MCA-7MCA-7
CFH-11
CFC-12-990
3 PIN
FSP-13G
12 PIN
ERD-20A-A02
MCA-7
EPD-21A-A01/A02
MCA-7
12 PIN
12 PIN
ERD-20A-A02
MCA-7 MCA-7
EPD-21A-A01/A02
MM-11 Manual Focus/Manual Zoom
Not available on HA42x, HA36x and A36x
MS-11 Manual Focus/Servo Zoom SS-11 Servo Focus/Servo Zoom
Not available on HA42x, HA36x and A36
12 PIN
12 PIN
ERD-10A-D01
MCA-6BMCA-6B
EPD-4A-E02
EBF-1
FSP-13G
EBF-1
12 PIN
3 PIN
ERD-10A-D01
EPD-4A-E02
MCA-6B MCA-6B
12 PIN
12 PIN
ERD-10A-D01
ESB-6A-D12
SE-210A-R15
MCA-6B
MCA-6B
EEC-13
MS-11D Manual Focus/Servo Zoom
For use with RM/ZM type lenses.
SS-13D Servo Focus/Servo Zoom
For use with RD/ZD type lenses.
SS-11D Servo Focus/Servo Zoom
For use with RM/ZM type lenses.
SS-14S Servo Focus/Servo Zoom
For use with RD/ZD type lenses.
DIGI POWER REAR CONTROL KITS
MOUNTING SYSTEM
Fujinon has replaced the “cone”
shaped mounting system with the
“tooth” system. The cone type may
still be ordered as a special order.
New Style
MCA-7
Old Style
MCA-1A
(Discontinued)
** FMM-6B
FMM-3C
** FMM-6B
FMM-3C
** FMM-6B
FMM-3C
LENS CONVERTERS
Wide Converter
(WCV)
Tele Converter
(TCV)
HD/ENG LENS CONVERTERS
*TCV/WCV are zoom thru type **ø 95mm P-1 screw on type
Wide attachement and fisheye attachment can be used at WIDE END.
Number of M.O.D. is at wide end.
Converted M.O.D. Weight
Model Type ø Size Converter* Mag. Focal (m) (kg)
Length (mm)
HS16x4.6 TELE 95 mm TCV-H95 1.5x 74.0 → 111.0 0.90 1.00
WIDE 95 mm WCV-H95 0.8x 4.6
→ 3.9 0.29 1.00
HS18x5.5/ TELE 85 mm TCV-H85 1.5x 100.0
→ 150.0 1.35 1.10
HSs18x5.5 WIDE 85 mm WCV-H85 0.8x 5.5
→ 4.4 0.38 1.05
WIDE 85 mm WAT-H85 0.7x 5.5
→ 3.9 0.29 0.36
FISHEYE 85 mm F-ATH85 0.57x 5.5
→ 3.1 0.19 0.36
HA16x6.3 TELE 95 mm TCV-H955 1.5x 101.0
→ 152.0 0.90 1.00
WIDE 95 mm WCV-H95 0.8x 6.3
→ 5.4 0.29 1.00
HA18x7.6E/ TELE 85 mm TCV-H85 1.5x 137.0
→ 205.5 1.35 1.10
HAs18x7.6 WIDE 85 mm WCV-H85 0.8x 7.6
→ 6.1 0.38 1.05
WIDE 85 mm WAT-H85 0.7x 7.6
→ 5.3 – 0.36
FISHEYE 85 mm F-ATH85 0.57x – – 0.36
HA22x7.3E TELE 110 mm TCV-H110 1.5x 161.0
→ 242.0 1.90 1.10
HA23x7.6E TELE 100 mm TCV-H100 1.5x 175.0
→ 262.5 1.80 1.00
WIDE 100 mm WCV-H100 0.8x 7.6
→ 6.1 0.51 1.05
WIDE 100 mm WAT-H100 0.7x 7.6
→ 5.3 0.39 0.53
FISHEYE 100 mm F-ATH100 0.57x 7.6
→ 4.3 0.26 0.63
XS17x5.5 TELE 85 mm TCV-H85 1.5x 94.0
→ 141.0 1.35 1.10
WIDE 85 mm WCV-H85 0.8x 5.5
→ 4.4 0.38 1.05
WIDE 85 mm WAT-H85 0.7x 5.5
→ 3.8 0.29 0.36
FISHEYE 85 mm F-ATH85 0.57x 5.5
→ 3.1 0.19 0.36
ZA17x7.6 TELE 85 mm TCV-H85 1.5x 130.0
→ 195.0 1.35 1.10
WIDE 85 mm WCV-H85 0.8x 7.6
→ 6.1 0.38 1.05
WIDE 85 mm WAT-H85 0.7x 7.6
→ 5.3 0.29 0.36
FISHEYE 85 mm F-ATH85 0.57x 7.6
→ 4.3 0.19 0.36
ZA22x7.6 TELE 100 mm TCV-H100 1.5x 167.0
→ 250.5 1.80 1.00
WIDE 100 mm WCV-H100 0.8x 7.6
→ 6.1 0.51 1.05
WIDE 100 mm WAT-H100 0.7x 7.6
→ 5.3 0.39 0.53
FISHEYE 100 mm F-ATH100 0.57x 7.6
→ 4.3 0.26 0.63
TELE CONVERTER
WIDE CONVERTER
WIDE ATTACHMENT
FISH-EYE ATTACHMENT
ZOOM LENS
2X EXTENDER
RATIO
CONVERTER
FILTER