FujiFilm Revoria Press E1136 User manual

Control Panel
Features of Control Panel
Pressing the Home button displays the Home
screen.
1. Power/Power Saving button
The power switches on.
Note
■When “Please wait...” is displayed, the machine
is warming up. The use of machine is not avail-
able during this time.
■If the power does not switch on, confirm that
the power plug is connected.
2. NFC touch area
This is an area for you to hold up your NFC-supported mobile devices over. To communicate interactively, the NFC func-
tion of this machine needs to be enabled.
3. Data indicator
This indicator blinks while data is being sent from the machine or data is being received from the client computer.
4. Note on status display lamp
The lamp lights up in green at an instant of operation reception. When an error occurs, the lamp blinks in orange.
5. Login
The user is authenticated when the user enters the User ID and logs in.
When the user is logged in with the administrator rights, [Administrator] is shown in this area. While the user is authen-
ticated, tapping on the authentication information display area logs out the user, and the state becomes as unauthenti-
cated.
6. Interrupt
Suspend the tasks under operation during continuous copy or print and conduct other tasks preferentially.
7. Opening menu
Tap this button to open the menu for change and check of the settings of the machine.
Tap on [<] to close the menu.
■This manual may not be edited, modified or copied in whole or part without the written consent of the publisher.
■Parts of this manual is subject to change without prior notice.
■The screen shots and the illustrations in this manual are used as examples. They may differ from yours depending
on the model, the software, or the OS.
2
Home Button
[Pause]
[Pins] [Address]
[Apps]
1
6
3
4
8
5
7
The PDF manual is available by clicking “PDF Manuals” on
the help of Internet Services.
Revoria Press
User's Manual
Before using the machine, please read this manual thoroughly. Be sure to keep this manual for future reference.
E1136/E1125/E1110/E1100
GM1541E2-1 January 2022 Edition 1
https://product1.iotconnectup.com/webui_help/ap/revoria_press_e1136/en/top.html

2
8. Home Screen
Apps/Pins/Address Screens can be displayed.
• [Apps]: You can tap on any of the application icons
and use its functions.
• [Pins]: You can execute a job again using Job Direc-
tion History and the job direction history of which pin
is created with [Create Pin] by user. If you create a
pin of the job direction history, you can also directly
activate a job without opening an application.
• [Address]: You can register addresses and other
information. You can activate an application from a
registered address.
After activating an application, the selected address
is set as the destination of the application.
Switching the Power Off
When the power is switched off, all the machine functions
are stopped.
Important
Do not switch the power off when the machine is in the
following states. If the power is switched off, the data
that is being processed may be deleted.
-During data reception (Data indicator is lit)
-Within 5 seconds after ejection of paper
-During copying or scanning
1. Press the Power/Power Saving button.
Note
Long pressing the Power/Power Saving button also
switches off power.
2. Tap on [Power Off Device].
Creating Pin
If you create a pin of Job Direction History of a job that is
executed in the past, you can easily execute the job with the
same settings.
Note
■Job direction histories and created pins are managed by
each user.
■Pinned job direction histories are not overwritten.
Creating Pin of Job Direction History
1. Log in.
2. On the Home screen, tap on [Pins].
3. Tap on on the right side of the history for
which you want to create a pin and tap on
[Create Pin].
4. Enter the name to save and tap on [OK].
Executing the Job from the Pinned Job
Direction History
On the [Pins] screen, tap on at the right side
of the pinned job and tap on [Start Now].

3
Loading the Paper
Important
■Do not place paper or other objects in the reserved
space of the tray. Doing so can result in a paper jam or
malfunction.
■While the printer is processing a job, do not remove the
paper tray used for the job.
Note
Before loading the paper into the paper tray, fan a stack
of paper well. This will separate the sheets, and it can
prevent paper jamming.
This section explains how to load the plain paper into the
tray 1 to 4.
Loadable Paper
Paper size (mm) Tray 1, 2
Standard size:
Max: A4 / Letter
Min: JIS B5
Tray 3, 4
Length: 140 to 330
Width: 182 to 488
Paper weight (g/m2) 52 to 216
1. Pull out the paper tray until it stops.
2. When paper is already loaded in the tray,
take out the paper.
3. When loading paper whose size is JIS B4 or
larger, pinch the knob and lift the paper rear
end guide, and set the guide into the hole
for the indicated size.
1
2
3
4. Pinch the guide clip(s) and adjust to the cor-
rect paper size.
There are two guide clips on the tray 1 and 2 and one
guide clip on the tray 3 and 4.
5. Fan a stack of paper, face the print surface
down, and then load the paper with edges
aligned according to the direction of the ar-
row.
Important
Do not load paper above the maximum fill line. It may
cause paper jams or machine malfunction.
Note
Adjust the guide clip(s) correctly to the size of paper.
If the guide clip(s) is not adjusted correctly, the machine
cannot feed the paper properly, resulting in paper jams.
6. Push in the paper tray.
7. When you have changed the paper type, set
the paper tray on the Device screen.
1. Tap on and tap on [Device].
2. Tap on [Paper Tray Settings].
3. After tapping on the number for the pa-
per tray you have loaded the paper, config-
ure the paper items, and then tap on [OK].
8. When printing, configure the paper settings
from the printer driver.

4
Document Glass
Loadable paper
Paper size (mm) Length: Up to 297,
Width: Up to 432
1. Open the document cover, and wipe off any
dirt from the document glass.
2. Load the document face down with the doc-
ument aligned with the upper left corner of
the document glass.
3. Close the document cover.
Copy/Scan
1. Set the document.
Document Feeder
Loadable paper
Paper size (mm) Length: 84 to 297,
Width: 140 to 432
Paper weight (g/m2) Single side printing: 38 to 200,
Double side printing: 50 to 200
1. Open the document cover.
2. Wipe off any dirt adhering to the glass strip
and white plastic area located in the left side
of the document glass.
3. Close the document cover.
4. Check that the document is free of tag paper,
adhesive tape, staples, and clips, and stretch
out the document if it is wrinkled or folded.
5. Align the upper left corner of the document
so that the document size is correctly detect-
ed.
6. Load the document face up (when the doc-
ument is 2-sided, place the front side up) in
the center of Document Feeder.
The confirmation indicator lights up.
Important
Do not set documents above the maximum fill line. It
may cause paper jams or machine malfunction.
Multiple
sheets
7. Move the document guide to align with
both edges of the document.
8. Open the document stopper.
1
sheet

5
2. On the [Apps] screen, tap on the desired Application icon.
Copy Scan
Copy
1. As needed, configure the setting items.
2. Tap on [Start].
Scan (Email)
Note
■[Scan to Folder], [Scan], [Scan to USB], and [Scan to
Desktop] are also available as methods for scanning.
■To send an e-mail, the e-mail settings need to be con-
figured in the Device beforehand.
1. Specify the recipient by directly entering
using the keyboard or by tapping on the Ad-
dress Book ( ).
Note
■When specifying multiple recipients by directly entering
using the keyboard, tap on recipients to add.
■To change the recipient type (To/Cc/Bcc), tap on ( ).
2. Tap on [Done] or [OK].
3. Tap on and configure the setting items as
needed.
4. Tap on [Start].

6
Electrical Safety
WARNING
This product shall be operated by the power source as indicated
on the product's data plate. Consult your local power company
to check if your power source meets the requirements.
WARNING: Connect this product to a protective earth
circuit.
This product is supplied with a plug that has a protective
earth pin. The plug fits only into an earthed electrical outlet.
This is a safety feature. If the plug doesn't fit to the outlet, con-
tact an electrician to replace the outlet to avoid risk of electric
shock. Never use an earthed adapter plug to connect the prod-
uct to the electrical outlet that has no earth connection termi-
nal. Improper connection of a grounding conductor may cause
electric shock.
Plug the power cord directly into a grounded electrical
outlet. To prevent overheat and a fire accident, do not
use an extension cord, a multi-plug adaptor or a multiple
connector. Consult your local representative to check if an out-
let is grounded.
Connect this product to a branch circuit or an outlet that
has larger capacity than the rated ampere and voltage of
this product. See the data plate on the rear panel of this
product for its rated ampere and voltage.
Never touch the power cord with wet hands. It may
cause electric shock.
Do not put an object on the power cord.
Always keep the plug connection free of dust. The dusty
and damp environment may bring about minute electric
current in a connector. It may generate heat and eventu-
ally cause a fire accident.
To avoid the risk of electric shock and a fire accident,
only use the power cord supplied with this product or
the ones designated by our company. The power cord is
exclusive use for this product. Do not use it for any other prod-
uct. Do not damage or alter the power cord. Damage and alter-
ation may generate heat and eventually cause electric shock or
a fire accident. If the power cord is damaged or insulated wires
are exposed, contact your local representative for its replace-
ment. Do not use a damaged or uninsulated cord to avoid the
risk of electric shock and a fire accident.
CAUTION
Unplug this product to turn off power completely. Install
this product near an outlet to easily unplug it in case of
emergency.
When cleaning this product, always switch off and un-
plug it. Access to a live product interior may cause elec-
tric shock.
Do not unplug or re-plug this product with the switch on.
Plugging and unplugging a live connector may deform
the plug and generate heat, and eventually cause a fire
accident.
Hold the plug not the cord when unplugging this prod-
uct, or it may damage the cord and cause electric shock
or a fire accident.
Always switch off and unplug the machine when it is not
used over weekends or long holidays. It may cause dete-
rioration of insulations and eventually electric shock or a
fire accident.
Once a month, switch off this product and check if
■the power cord is plugged firmly into an electrical out-
let;
■the plug is not excessively heated, rusted or bent;
■the plug and electrical outlet are free of dust; and
■the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off and unplug this
product first and contact your local representative.
Safety Notes
Before using this product, read “Safety Notes” carefully for
safety use.
This product and recommended supplies have been tested
and found to comply with strict safety requirements includ-
ing safety agency approvals and compliance with environ-
mental standards. Follow the following instructions for safe-
ty use.
WARNING
Any unauthorized alteration including an addition of new
functions or connection to external devices may not be cov-
ered by the product warranty. Contact your local represen-
tative for more information. (SG03)
If you need to pull out a tray to remove paper jam, contact
your local representative. Do not pull out a tray, otherwise it
may cause injuries.
Follow all warning instructions marked on this product. The
warning marks stand for the followings:
DANGER
Used for item that if not followed
strictly, can lead death or severe or
fatal injuries and the possibility to do
it is comparatively high.
WARNING Used for items that if not followed
strictly, can lead to severe or fatal
injuries.
CAUTION
Used for items that if not followed
strictly, can cause injuries to user or
damages to machine.
: A symbol for items to pay attention to when handling ma-
chine. Follow instructions carefully to use machine safely.
Caution Caution for
electrostatic
breakage
Flammable Explodable Electric
shock
Heated
surface
Moving
object
Pinched fingers Rotating Parts
Hazard
Sharp Edge
Hazard
: A symbol for prohibited items. Follow instructions careful-
ly to avoid any dangerous acts.
Prohibited No fire Do not touch Do not use in
bathroom
Never touch
with wet hand
Keep away
from wet
Do not tear
down
: A symbol for items that must be performed. Follow in-
structions carefully to carry out these essential tasks.
Unplug Ground/EarthInstructions

7
Machine Installation
WARNING
Do not locate this product where people might step on
or trip over the power cord. Friction or excessive pres-
sure may generate heat and eventually cause electric
shock or a fire accident.
CAUTION
Never locate this product in the following places:
■Near radiators or any other heat sources
■Near volatile flammable materials such as curtains
■In the hot, humid, dusty or poorly ventilated environment
■In the place receiving direct sunlight
■Near cookers or humidifiers
Keep away the packing materials of product from small
children. The thin film may cling to nose and mouth and
prevent breathing.
Locate this product on a level and sturdy surface that
can withstand a weight of 269 kg or less (minimum con-
figuration). Otherwise, if tilted, the product may fall over
and cause injuries.
Locate this product in a well-ventilated area. Do not ob-
struct ventilation openings of the product. Keep the min-
imum clearance as follows for ventilation and an access
to the power plug. Unplug the product if an abnormal condition
is noted.
Minimum configuration
587 782.5
1869.5
100
80 80
1879.3
1719.3
400
(Installation dimensions)
Installation space
(Installation dimensions)
(Occupied dimensions)
Occupied
space
(Occupied dimensions)
(Unit: mm)
The above illustration indicates the Revoria Press E1100
model with the bypass tray and simple catch tray or offset
catch tray installed.
Do not incline the product at more than 10° angle. Oth-
erwise, it may fall over and cause injuries.
10 °
10
°10 °10
°
Always lock the wheels of this product after installation.
Otherwise, it may fall over or slide and cause injuries.
To bundle wires and cables, always use the cable ties and
spiral tubes that our company supplies. Otherwise, it
may cause some defects.
Operational Safety
WARNING
The operator’s product maintenance procedures are de-
scribed in the manuals supplied with this product. Do not
carry out any other maintenance procedures not de-
scribed in the manuals.
This product features safety design not to allow opera-
tors access to hazard areas. The hazard areas are isolat-
ed from operators by covers or protectors which require
a tool to remove. To prevent electric shock and injuries, never
remove those covers and protectors.
To avoid the risk of electric shock and a fire accident,
switch off and unplug the product promptly in the fol-
lowing conditions, then contact your local representa-
tive.
■The product emits smoke or its surface is unusually hot.
■The product emits unusual noise or odour.
■The power cord is cracked or worn down.
■A circuit breaker, fuse or any other safety device becomes ac-
tivated.
■Any liquid is spilled into the product.
■The product is soaked in water.
■Any part of the product is damaged.
Do not insert any object into slots or openings of this
product. Do not put any of the followings on the product:
■Liquid container such as flower vases or coffee cups
■Metal parts such as staples or clips
■Heavy objects
If liquid is spilled over or metal parts are slipped into the prod-
uct, it may cause electric shock or a fire accident.
Do not place liquid, particles, small metal pieces or their
containers in consumable storage spaces. Spills may
cause electric shock or fire due to short-circuit.
Do not place dangerous objects (e.g., fragiles, volatile
and flammable chemicals, creatures) in consumable
storage spaces. Otherwise, it may cause catching fire.
Do not use conductive paper such as origami paper, car-
bonic paper or conductively-coated paper. When paper
jam occurs, it may cause short-circuit and eventually a
fire accident.
When cleaning this product, use the designated cleaning
materials exclusive to it. Other cleaning materials may
result in poor performance of the product. Never use
aerosol cleaners to avoid catching fire and explosion.

8
CAUTION
Always follow all warning instructions marked on or sup-
plied with this product. To avoid the risk of burn injuries
and electric shock, never touch the area with the “High
Temperature” mark on.
Keep electrical and mechanical safety interlocks active.
Keep the safety interlocks away from magnetic materi-
als. Magnetic materials may accidentally activate the
product and cause injuries or electric shock.
A ground fault interrupter is embedded in this product. If
current leakage occurs, the ground fault interrupter au-
tomatically cuts off power circuit to prevent electric
shock and a fire accident. The ground fault interrupter is nor-
mally ON (indicated as “|”). Check once a month if the ground
fault interrupter works properly in accordance with the follow-
ing procedures:
1. Press the TEST button.
RESET button
TEST button
2. Check that the RESET button is turned OFF and in the
“O” state.
3. Turn ON the RESET button (in the “|” state”).
If the circuit does not work properly, contact your local repre-
sentative.
Do not attempt to remove a paper deeply jammed inside
the product, particularly a paper wrapped around the
fusing unit or the heat roller. Otherwise, it may cause in-
juries or burns. Switch off the product immediately and contact
your local representative.
Never touch the paper output area of the finisher
during operation. It may cause injuries.
Be careful in removing jammed staples.
Be careful not to get injured by waste staples when de-
taching a staple waste container.
Waste staples may come out with output paper. Be care-
ful not to get injured by the staples.
Never touch safety interlocks. When a front cover is
open, safety interlocks become activated to stop the ma-
chinery. Do not apply pressure on safety interlocks with a
coin or screwdriver. Otherwise, the machinery may become ac-
tivated and cause injuries.
Do not staple punched holes of paper. Sharp points of a
staple may cause injuries.
Be careful not to drop an object when you bring it out
from consumable storage spaces. Otherwise, you may
get injured.
Grip the handhold on a door of consumable storage
spaces when you open and close it. Do not hold an upper
or bottom edge of the door. Otherwise, you may get in-
jured.
Do not add a shock to a door of consumable storage
spaces. Otherwise, the door may break to drop off and
you may get injured.
Do not apply excessive force to hold thick document on
the document glass. It may break the glass and cause in-
juries.
To move this product to another location, contact your
local representative.
Ventilate well during extended operation or mass copy-
ing or printing. It may affect the office air environment
due to odor such as ozone in a poorly ventilated room.
Provide proper ventilation to ensure the comfortable and safe
environment.
Consumable
WARNING
Store all consumables in accordance with the instruc-
tions given on its package or container.
Never use a vacuum cleaner for spilled toner and residual
toner in this product, toner cartridge or waste toner con-
tainer. It may catch fire by electric sparks inside a vacu-
um cleaner and cause explosion. Use a broom or a wet cloth to
wipe off the spills. If you spill a large volume of toner, contact
your local representative.
Never throw a toner cartridge into an open flame. Re-
maining toner in the cartridge may catch fire and cause
burn injuries or explosion. If you have a used toner car-
tridge no longer needed, contact your local representative for
its disposal.
Never throw a waste toner container into an open flame.
Toner may catch fire and cause burn injuries or explo-
sion. If you have a used waste toner container no longer
needed, contact your local representative for its disposal.
CAUTION
Keep drum cartridges and toner cartridges out of the
reach of children. If a child accidentally swallows toner,
spit it out, rinse mouth with water, drink water and con-
sult a physician immediately.
When replacing drum cartridges and toner cartridges, be
careful not to spill the toner. In case of any toner spills,
avoid contact with clothes, skin, eyes and mouth as well
as inhalation.
■If toner spills onto your skin or clothing, wash it off
with soap and water.
■If you get toner particles in the eyes, wash it out with
plenty of water for at least 15 minutes until irritation is
gone.
■If you inhale toner particles, move to a fresh air location and
rinse your mouth with water.
■If you swallow toner, spit it out, rinse your mouth with water,
drink plenty of water and consult a physician immediately.
Consult a physician if necessary.

9
Other
WARNING
This is a class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
Regulatory Information for RFID
This product contains Radio Frequency Identification system
device (RFID) and it is certified in compliance with applica-
ble local laws and/or regulations.
Laser Safety
CAUTION
Any operations or adjustments not stated in the op-
eration manual may cause hazardous light exposure
and eventually burn injuries or loss of eyesight.
This product has been tested and found to comply with the
Class 1 Laser Equipment requirements defined by the inter-
national standard IEC60825-1:2014 and has no light expo-
sure hazard. The product has no hazardous light emission as
it features light protection components and covers to shut in
all light beam during operation and maintenance.
Laser Diode : Class 3B
Wave length : 780 nm
Beam divergence : θ//15 deg, θ⊥13 deg
Pulse duration : CW
Repetation rate : CW
Maximum power : 57.6 mW

10

11

Software License Agreement
You must read and agree with the following terms and conditions before you open the package and use the media accompanying
the device. By opening the package, you agree to be bound by the terms and conditions.
Term and conditions
• Our company does not provide any implicit or explicit guarantee on the contents, accuracy and safety of the media.
• The copyrights of the information provided in this media belongs to our company
• The contents of this media shall not be duplicated, modified, sold, published, read or disclosed to a third party for any amount
of money whatsoever.
Disclaimer
Our company is not liable for any direct, indirect or spillover damages; loss of data, program or intangible properties; and lost
profits arising out of the use of this software.
Read Before Using
Before using the machine, please read “License Agreement” (terms for using the Adobe Systems Inc. software) stored on the
“Software/Product Manual” disc.
“License Agreement” is stored in the “License” folder contained on the disc.
Use the software only after you agree with all applicable terms and conditions. By using the software, you are agreeing to be
bound by the terms and conditions. If you do not agree to “License Agreement”, please contact the dealer you purchased the
product.
Please refer to the official website for the status of security certification.
If you use the product as an ISO/IEC 15408 certified product, please refer to the “Security Function Supplementary Guide” on the
help of Internet Services and make sure to configure the settings appropriately.
More online support options.....
TO ACCESS MORE ONILNE SUPPORT OPTIONS
Please go to our website, https://fujifilm.com/fbglobal/eng/support and then select your country to proceed.
Print Drivers & Utilities
ACCESS THE LATEST PRODUCT SUPPORT TOOLS ONLINE
Fully tested printer drivers, utilities and software patches are available for our products.
Self Help
SELF DIRECTED SUPPORT READY WHEN YOU NEED IT
Solutions are provided in multiple languages. Download useful posters, “How-to” guides, video tutorials and more.
Designed for desktop and mobile viewing, our site provides fast and self-directed support in seconds and minutes.
Need more support?
eLogging
TECHNICAL SUPPORT CENTRE
Log hardware or software support requests online via your local support website.
Our people are highly skilled, industry certified professionals. Accessing state of the art laboratories and remote diagnostic
tools to replicate problems and provide timely solutions.
With direct access to product development and engineering, this focused team assists in the resolution of complex technical
issues.
Contact us
Localized Technical Support Centre phone details can be accessed via the “Contact” link for your country.
Go to, https://fujifilm.com/fbglobal/eng/support and then select your country to proceed.