oliser MS 45 User manual

MS45INSTRUCTIONS
Mesrutiyet caddesi. Hatay Sokak. 17/B
06640. Kızılay / Ankara
Turkey
Tel : [phone]
Fax : [phone]
Web : www.oliser.com.tr
Email : [email protected]

To Order Call: [phone]
preparation
Place an Ink supply bottle to the back of the machine and insert the
ink supply tube into the bottle.
Plug in the plug and the machine will be ready to start filling .
Now, The machine is ready to fill the cartridges. Before filling the
cartridges, be sure that they are empty. If not, evacuate the remaining ink
from cartrdige.
This machine is desinged to only fill FRESH CARTRIDGES if u do
not have a steam genarator.
Strictly recommended : Before filling the cartridges we
recommend you to clean the printheads of the cartridges by a steam
genarator. It will help you to fill the cartridges easily and will open the all
clogged or dried printheads, So, your success rate will inscrease

To Order Call: [phone]
Place the cartridge in to the evacuation station if necessary
Squeeze the cartridge by using the handle
Switch on the Evacuation switch to start Evacuation
Then remove the cartridge

To Order Call: [phone]
Place the cartridge in to the filling station
Sequre the cartridge by using the handle
Then remove the cartridge using the handle and test it

To Order Call: [phone]
Tube replacement of motors