Fujitsu Siemens Computers D1241 User manual

             
 
 


     
   
 
•     
•   
•   
               
 
               
http://www.fujitsu-siemens.com

     
       
       
       
!  "      
  #  $ 
     
 %& 
'( )  *
+,&- ,.


   '   *
/* 0100 01&00
A26361-D1241-Z120-1-7619
 





 

 

  
 



  

  ! "  #$ %&&&
        ''(  )* 
    +",
' '" '"-*)"  ./     ' 
"0%  )"0% .      1 ' 
,           
/ /    /
,            
    
) /    
,               
  * !  
2    

4User’s Manual
CONTENTS
1. INTRODUCTION.............................................................................7
1.1How This Manual Is Organized..................................................7
1.2Item Checklist.............................................................................7
2. FEATURES........................................................................................8
2.1The motherboard..........................................................................8
2.1.1Specifications..................................................................8
2.1.2Specifications–Optional Components.............................9
2.1.3Performance...................................................................10
2.1.4Intelligence....................................................................11
2.2Motherboard Components........................................................12
2.2.1 Component Locations..................................................13
3. HARDWARE SETUP......................................................................14
3.1Motherboard Layout.................................................................14
3.2Layout Contents........................................................................15
3.3Hardware Setup Procedure.......................................................16
3.4Motherboard Settings................................................................16
3.5System Memory (DIMM).........................................................17
3.5.1SDRAM Configurations................................................17
3.5.2DIMM Installation.........................................................18
3.6Central Processing Unit (CPU).................................................19
3.7.1Expansion Card Installation Procedure.........................20
3.7Expansion Cards.......................................................................20
3.7.2Assigning IRQs for Expansion Cards............................21
3.8Connectors................................................................................22
SCSI Connection Notes............................................................32
3.9Starting Up the First Time........................................................33
4. BIOS SETUP.....................................................................................35
4.1Managing and Updating Your BIOS.........................................35
4.1.1Upon First Use of the Computer System.......................35
4.1.2Updating BIOS Procedures...........................................36
4.2BIOS Setup Program................................................................39
4.2.1BIOS Menu Bar.............................................................40
4.2.2Legend Bar....................................................................40
4.3Main Menu................................................................................42
4.3.1Primary & Secondary Master/Slave..............................43
4.3.2Keyboard Features.........................................................46

User’s Manual 5
CONTENTS
4.4Advanced Menu........................................................................48
4.4.1Chip Configuration........................................................50
4.4.2I/O Device Configuration..............................................51
4.4.3PCI Configuration.........................................................53
4.4.4 Shadow Configuration.....................................................55
4.5Power Menu..............................................................................56
4.5.1Power Up Control..........................................................58
4.5.2Hardware Monitor.........................................................60
4.6Boot Menu................................................................................61
4.7Exit Menu.................................................................................63
5. APPENDIX.......................................................................................65
5.1Glossary...................................................................................65

6User’s Manual
FCC & DOC COMPLIANCE
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following
two conditions:
•This device may not cause harmful interference, and
•This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with manufacturer's instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
•Re-orient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications to this product not expressly ap-
proved by the manufacturer could void any assurances of safety or performance
and could result in violation of Part 15 of the FCC Rules.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the
Federal Register, National Archives and Records Administration, U.S. Government Printing Office.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
This Class B digital apparatus complies with Canadian ICES-003.
CetappareilnumériquedelaclasseBestconformeàlanormeNMB-003duCanada.

User’s Manual 7
1.1How This Manual Is Organized
This manual is divided into the following sections:
1.INTRODUCTION Manual information and checklist
2.FEATURES Production information and specifications
3.HARDWARE SETUP Intructions on setting up the motherboard.
4.BIOS SETUP Intructions on setting up the BIOS
5.SOFTWARE SETUP Intructions on setting up the included software
6.SOFTWARE REFERENCE Reference material for the included software
7.APPENDIX Optional items and general reference
1.2Item Checklist
Check that your package is complete. If you discover damaged or missing items,
contact your retailer.
(1) Motherboard
(1) I/O Shield
(1) Ribbon cable for master and slave IDE drives
(1) 68-pin LVD SCSI ribbon cable for Ultra160/Ultra2 devices with Terminator
(1) Ribbon cable for a 3.5” floppy disk drive
(1) Support drivers and utilities
(1) This Motherboard User’s Manual
Optional Items
(1) Socket 370 CPU Terminator (required when installing only one CPU)
1. INTRODUCTION
1.INTRODUCTION
Manual/Checklist

8User’s Manual
2. FEATURES
Specifications
2. FEATURES
2.1The motherboard
Themotherboard is carefully designed for the demanding corpo-
rate user who wants advanced features processed by the fastest processors for multi-
server applications.
2.1.1Specifications
•Latest Intel ProcessorSupport
Intel Pentium
®
III 133MHz FSB Coppermine core FC-PGA
Intel Pentium
®
III 100MHz FSB Coppermine core FC-PGA
•Multi-ProcessorOS:Supports multi-processor operating systems such asWin-
dows NT/2000, Unix, Linux, and Netware when dual processors of the same
type and speed are installed.
•ServerWorks LE 3.0 Chipset: Features the ServerWorks LE 3.0 North Bridge
and RCC Open South Bridge. Supports PC133 SDRAM with ECC, dual peer to
peer PCI buses, and 64-bit (66/33MHz) PCI bus speed.
•OnboardGraphics:FeaturesATI RAGE-XLPCIVGAcontroller, 4MB PC100
SDRAM, and LCD panel connector.
•SmartNetworking! Features the Intel82559Fast-Ethernet LANController(fully
integrated 10BASE-T/100BASE-TX). Supports Wired for Management, remote
wake-up, and OnNow initiative to reduce the Total Cost of Ownership (TCO).
•4GB PC133 Memory Support: Equipped with four Dual Inline Memory Mod-
ule (DIMM) sockets to support PC133 “registered” SDRAMs (available in 64,
128, 256, 512, or 1024MB densities) up to 4GB.
•SCSI Support: LSI 64-bit (66MHz) / 32-bit (33MHz) Ultra160 / Ultra2 (depend-
ingon model) dual channel SCSI controller supports up to30 SCSI devices. BIOS
configurable onboard SCSI terminations.
SCSI ChipsetSCSI Type PCI1-4PCI 5-6PCI7
LSI 896 33MHz Ultra2 33MHz33MHz33MHz
LSI 1010-66 66MHz Ultra160 33MHz66MHz(none)
•UltraDMA/33 Support: Comes with an onboard PCI Bus Master IDE control-
ler with two connectors that support four IDE devices on two channels. Sup-
ports UltraDMA/33, PIO Modes 3 & 4 and Bus Master IDE DMA Mode 2, and
Enhanced IDE devices, such as DVD-ROM, CD-ROM, CD-R/RW, LS-120, and
Tape Backup drives.

User’s Manual 9
2. FEATURES
2. FEATURES
Optional Components
•PCI/ISA Expansion Slots:
(4) 32-bit (33MHz) PCI
(2/3)64-bit (66/33MHz) PCI (depending on model)
(1) ASMC slot for IPMI compliant management solution
•4 USB Ports: Provides more options for additional peripherals.
•SMBus:Features the System Management Bus interface, which is used to physi-
cally transport commands and information between SMBus devices.
•Wake-Up Support: Supports Wake-On-LAN and Wake-On-Ring, and BIOS
Wake-Up.
•ISAMulti-I/O: Provides two high-speed UARTcompatible serial ports and
one parallel port with EPPand ECPcapabilities. UART2 can also be directed
from COM2 to the Infrared Module for wireless connections.
•Around-the-Clock Intrusion Detection: Chassis intrusion circuitry can log
chassis open events into LDSM. The onboard battery supports detection even
when normal power is removed and through a new design, battery drain is even
lower than the RTC used for keeping time!
•Server Health Monitoring: Provides an easy way to examine and manage sys-
tem status information, such as CPU and systerm voltages, temperatures, and
fan status through the onboard hardwareASIC.
•Enhanced ACPI: Programmable BIOS (Flash EEPROM), offering enhanced
ACPI for Windows NTand Windows 2000 compatibility, and autodetection of
most devices for virtually automatic setup.
•Smart BIOS: 4Mbit firmware gives a new easy-to-use interface which pro-
vides more control and protection over the motherboard. Provides Vcore and
CPU/SDRAMfrequency adjustments,boot blockwrite protection,and HD/SCSI/
MO/ZIP/CD/Floppy boot selection. Year 2000 certified.
•CPU Throttling: CPU throttling protects CPU from overheating.
•Integrated IOAPIC: Supports full 32-APIC entries and removes the need for a
separate IOAPIC chip.
2.1.2Specifications–Optional Components
The following onboard components are optional at the time of purchase:
•Cape Lookout Chipset: The optional cape lookout chipset together with the
onboard Intel 82559 Fast-Ethernet controller supports Alert-On-Lan II (AOL-
II) monitoring and management solutions.

10 User’s Manual
2. FEATURES
Performance
2. FEATURES
2.1.3Performance
•UltraPerformance:Onboard Ultra160/Ultra2 (depending on model) dual chan-
nel SCSI controller with two connectors that support 30 Ultra160/Ultra2 SCSI
devices in two channels.
•Dual Speeds: CPU frequency can operate at either 133MHz or 100MHz de-
pending on the CPU installed.
•High-Speed Data TransferInterface: SCSI transfers using Ultra160/Ultra2
(dependingon model)dual channelSCSI controllercan handlerates upto 160MB/
s or 80MB/s. Ultra160/Ultra2 is backward compatible with slower SCSI de-
vices so that older SCSI devices are not wasted. (Ultra160/Ultra2 SCSI cables
have twisted pairs compared to flat ribbon cables used in older SCSI standards.)
•Advanced 64-bit PCI: Maximizes IO bandwidth for the next generation of 64-
bit PCI cards, supports up to (2) full 64-bit 66/33MHz PCI busses, and supports
up to (5) 32-bit 33MHz PCI busses.
•Full Peer-to-PeerSupport:Allows full peer-to-peer transactions between PCI
busses and increases options for intelligent IO and Server Management cards.
•SDRAM Optimized Performance: This motherboard supports PC133 “regis-
tered” Synchronous Dynamic RandomAccess Memory (SDRAM), which increases
the data transfer rate to 1064MB/s max
•ACPIReady:ACPI (AdvancedConfiguration andPower Interface)isalso imple-
mented on all smart series motherboards ???. ACPI provides more Energy
Saving Features for future operating systems (OS) supporting OS Direct Power
Management (OSPM) functionality.With these features implemented in the OS,
PCs can be ready around the clock, yet satisfy all the energy saving standards.
To fully utilize the benefits of ACPI, an ACPI-supported OS, such as Windows
98, must be used.
•NewCompliancy:Both the BIOS and hardware levels of the motherboard meet
the stringent requirements for SDG2.0 certification. The new SDG2.0 require-
ments for systems and components are based on the following high-level goals:
support for Plug and Play compatibility and power management for configuring
and managing all system components, and 32-bit device drivers and installation
proceduresforWindows NT/2000. Color-codedconnectors and descriptiveicons
make identification easy as required by PC99.

User’s Manual 11
2. FEATURES
2. FEATURES
Intelligence
2.1.4Intelligence
•Fan Status Monitoring and Alarm: To prevent system overheat and system
damage, the CPU, power supply, and system fans can be monitored for RPM
and failure. All the fans are set for its normal RPM range and alarm thresholds.
•TemperatureMonitoringandAlert:Topreventsystem overheat andsystemdam-
age, this motherboard supports processor thermal sensing and auto-protection.
•Voltage Monitoring andAlert: System voltage levels are monitored to ensure
stable current to critical motherboard components. Voltage specifications are
more critical for future processors, so monitoring is necessary to ensure proper
system configuration and management.
•System Resources Alert: Today’s server operating systems, such as Windows
NTand Windows 2000, require much more memory and hard drive space to
present enormous user interfaces and run large applications. The onboard hard-
wareASIC in conjunction Intel LDSM will warn the user before the sys-
tem resources are used up to prevent possible application crashes. Suggestions
will give the user information on managing their limited resources more effi-
ciently.
•Dual Function PowerButton: Through BIOS, the power button can be defined
as the “Stand by” (a.k.a. Suspend or Sleep) button or as the Soft-Off (see ATX
Power / Soft-Off Switch Lead in 3.8 Connectors for more information) button.
Regardless of the setting, pushing the power button for more than 4 seconds will
enter the Soft-Off mode.
•Remote Ring On (requires modem): This allows a computer to be turned on
remotely through an internal or external modem. With this benefit on-hand, users
can access any information from their computers from anywhere in the world.
•Alert-on-LAN II (requires optional hardware component): Part ofWired for
Management to enable ITstaff to remotely respond to and resolve system trouble
which will decrease down time and lower total cost of ownership. Remote man-
agement response via remote diagnostics and troubleshooting work even when
the operating system has frozen. Remote power down for power management.
Asset tracking and monitoring through features like presence ping and logoff
notification.

12 User’s Manual
2. FEATURES
2. FEATURES
MB Components
2.2Motherboard Components
See opposite page for locations. Location
Processor Support (2) Socket 370 for Pentium III Processors...............................2
Chipsets ServerWorks ServerSet LE 3.0 North Bridge...........................4
ServerWorks Open South Bridge...........................................10
4Mbit Firmware Hub (FWH).................................................17
ISA Multi-I/O Chipset............................................................19
Main Memory Maximum 4GB support
(4) DIMM Sockets....................................................................5
PC133 “registered” SDRAM support
Expansion Slots (4) 32-bit (33MHz) PCI..........................................................20
(2) 64-bit / 32-bit PCI (depending on model).........................18
(1) 32-bit PCI (depending on model).....................................16
(1) ASMS slot..............................................................15
System I/O (1) Floppy Disk Drive Connector.............................................7
(2) IDE Connectors (UltraDMA33 Support)............................6
(1) Parallel Port Connector...........................................(Top) 24
(2) Serial COM1/COM2 Port Connectors.........(Bottom) 23, 25
(1) RJ-45 Fast-Ethernet Connector...............................(Top) 26
(2) USB Port Connectors.........................................(Bottom) 26
(1) PS/2 Mouse Connector...........................................(Top) 27
(1) PS/2 Keyboard Connector.................................(Bottom) 27
(1) VGAMonitor Connector................................................. 22
Network Features Intel 82559 Fast-Ethernet Controller......................................21
Wake-On-LAN Connector..................(see layout on next page)
Wake-On-Ring Connector..................(see layout on next page)
Hardware MonitoringSystem Voltage Monitoring (integrated inASIC).......14
(4) Fan Power & Speed Monitoring Connectors(see layout on next page)
Power ATX Power Supply Connector.................................................1
Special Feature LSI 64-bit (66/33MHz) / 32-bit (33MHz) Ultra160 / Ultra2
(depending on model) 2 ch. SCSI controller................11
Onboard SCSI Connectors...................................................8, 9
Form Factor ATX

User’s Manual 13
2. FEATURES
2. FEATURES
Component Location
2.2.1 Component Locations
5
26
24
22
23
27
2
17
3
25
4
20
21
1
9
6
815 12 1011
7
13
16
19
18
14

  
3. HARDWARE SETUP
3.1 Motherboard Layout
24,4 cm (9,6 in)
PS/2
T: Mouse
B: Keyboard
Bottom: Top:
USB1 RJ-45
USB2
COM1
COM2
PARALLEL PORT
CHA_FAN1
ATX_POWER
Socket 370
Socket 370
VGA
USBPORT
3 & 4
ServerWorks
(RCC)
NB6635
North Bridge
CPU_FAN2
CPU_FAN1
Digital Flat Panel
(DFP) Connector
Super
I/O
4Mbit
Flash
BIOS
Intel
Fast
Ethernet
Server Management Card
(SMC) Slot
PCI7 (32-bit, 33MHz)
(not availablewith1010-66SCSI)
PCI6 (64-bit, 66/33MHz)
PCI5 (64-bit, 66/33MHz)
PCI4 (32-bit, 66/33MHz)
PCI3 (32-bit, 66/33MHz)
PCI2 (32-bit, 66/33MHz)
PCI1(32-bit, 66/33MHz)
WOR
CLEAR CMOS
ASIC
with Hardware
Monitor
CR2032 3V
Lithium Cell
CMOS Power
LSI SCSI
Controller
896/1010-66
34
68
1
35
SCSI-B
68-Pin Ultra 160/Ultra2-Wide SCSI Connector
ServerWorks
(RCC)
IB6566
South Bridge
2MB
SDRAM
2MB
SDRAM
12 4
35678
CONFIG Switches (reserved)
ATI
RAGE XL
VGA
Controller
68-Pin Ultra 160/Ultra2-Wide SCSI Connector
SCSI-A
PANEL
(Reserved)
IDELED
WOL_CON
DIMM Socket 0 (64/72-bit, 168-pin module)
01
DIMM Socket 1 (64/72-bit, 168-pin module)
23
DIMM Socket 2 (64/72-bit, 168-pin module)
45
DIMM Socket 3 (64/72-bit, 168-pin module)
67
Secondary IDE
Primary IDE FLOPPY
CHA_FAN2
SMB
30,5 cm (12 in)
SCSI Chipset SCSI PCI1-4 PCI 5-6 PCI7
LSI 896 33 MHz Ultra2 33MHz 33MHz 33MHz
LSI 1010-66 66MHz Ultra160 33MHz 66MHz (none)
Note. Grayed components are optional at the time of purchase.

User’s Manual 15
3. HARDWARE SETUP
Layout Contents
3. H/W SETUP
3.2Layout Contents
Expansion Slots
1)DIMM0/1/2/3 p.17168-Pin System Memory Support
2)CPU p.19Central Processing Unit (CPU)
3)PCI1/PCI2/PCI3/PCI4/PCI7p.2032-bitPCIBusExpansionSlots(PCI7dependsonmodel)
4)PCI5/PCI6p.2064-/32-bitPCIBusExpansionSlots(dependingonmodel)
Connectors
1)PS2KBMS p.22PS/2 Mouse Connector (6-pin female)
2)PS2KBMS p.22PS/2 Keyboard Connector (6-pin female)
3)USB p.23Universal Serial Bus Ports 0 & 1 (Two 4-pin female)
4)LAN p.23Fast-Ethernet Connector (RJ45)
5)PRINTER p.23Parallel Port Connector (25-pin female)
6)COM1/COM2 p.23SerialPort COM1/COM2Connectosr (Two9-pin male)
7)VGA p.24Monitor (VGA) Output Connector (15-pin female)
8) USBPORTp.24Universal Serial Bus Port (10-1 pins)
9)CHASSIS p.25Chassis Intrusion Connector (4-1 pins)
10)FLOPPY p.25Floppy Disk Drive Connector (34-1 pins)
11)IDE1/IDE2 p.26Primary/Secondary IDE Connectors (Two 40-1 pins)
12)WOL_CON p.27Wake-On-LAN Connector (3 pins)
13)WOR p.27Wake-On-Ring Connector (2 pins)
14)IDELED p.28IDE/SCSI Activity LED (2 pins)
15)CPU_FAN1/2,CHA_FAN1/2p.28CPU and Chassis Fan Connectors (Four 3-pin)
16) SMB p.29SMBus Connector (5-1 pins)
17)NIC (PANEL) p.29NIC Activity LED (2 pins)
18)STATUS (PANEL) p.29Status Activity LED (2 pins)
19)SMI (PANEL) p.29System Management Interrupt Switch Lead (2 pins)
20)PWRSW(PANEL) p.30ATX Power / Soft-Off Switch Lead (2 pins)
21)CHASSIS (PANEL) p.30Chassis Intrusion Connector (2 pins)
22)RESET(PANEL) p.30Reset Switch Lead (2 pins)
23)PWR.LED (PANEL) p.30System Power LED Lead (3-1 pins)
24)NMI (PANEL) p.30Non-Mask Interrupt Switch (2 pins)
25)SPEAKER (PANEL) p.30System Warning Speaker Connector (4 pins)
26)IDELED (PANEL) p.30IDE/SCSI Activity LED (2 pins)
27)ATXPWR p.31ATX Power Supply Connector (20 pins)
28)SCSI-A/SCSI-B p.3168-pin Ultra160/Ultra2 SCSIConnectors(Two68 pins)

16 User’s Manual
3. HARDWARE SETUP
3.3Hardware Setup Procedure
Before using your computer, you must complete the following steps:
•Check Motherboard Settings
•Install Memory Modules
•Install the Central Processing Unit (CPU)
•Install Expansion Cards
•Connect Ribbon Cables, Panel Wires, and PowerSupply
3.4Motherboard Settings
WARNING! Computer motherboards and expansion cards contain very delicate
Integrated Circuit (IC) chips. To protect them against damage from static electric-
ity, you should follow some precautions whenever you work on your computer.
1.Unplug your computer when working on the inside.
2.Use a grounded wrist strap before handling computer components. If you do
nothave one, touchboth of yourhands to asafely grounded objector to ametal
object, such as the power supply case.
3.Hold components by the edges and try not to touch the IC chips, leads or con-
nectors, or other components.
4.Placecomponents ona groundedantistatic pador onthe bagthat camewith the
component whenever the components are separated from the system.
5.Ensure that the ATX power supply is switched off before you plug in or
remove the ATX power connector on the motherboard.
Motherboard Settings
3. H/W SETUP