Fujitsu Siemens Computers PRIMERGY R450 User guide

PRIMERGY R450
System configurator and order-information guide
Contents
Instructions
Configuration diagram
Configurator
0System software
IBasic unit
II Processor
III Memory
IV Graphics
VAccessible drives
VI Hard disk drives
VII SCSI controller
VIII Disk array
IX Communication/Network
XSystem Management Products
XI Miscellaneous
XII National accessories packs
Change report
PRIMERGY Server
November 2003

System configurator and order-information guide
PRIMERGY R450 Status 2003-10-24
Instructions
This document contains basic product and configuration information that will enable you to configure your system via
PC-/ System-Architect.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
Section III Memory, example
There are X memory slots which can be equipped with XXX MB
It is permissible to make up to X passes through the memory upgrade options
S26361-XXX-XXX S26361-XXX-XXX
Memory XXX MB Memory XXX MB
X times
max. X times per system max. X times per system
In one chapter you can only select as many components (here 4x) as the arrow indicates
4x
Please note that there are information symbols which indicate necessary information
Further information in the internet see:
http://www.primergy.com
(internet)
http://extranet.fujitsu-siemens.com/primergy
(extranet)
Prices and availability see price list and PC-/ System-Architect.
Subject to change and errors excepted.
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 2 of 12

System configurator and order-informtion guide
PRIMERGY R450 Status 2003-10-24
Configuration diagram PRIMERGY R450
TOP VIEW
FRONT VIEW
System unit ( I )
Extension slots
Peripheral Bay ( V )
Graphics ( IV )
3.5"x0.5"
LCD
SCSI controller ( VII )
floppy disk
Disk array ( VIII )
Communication/Network ( IX )
Hard Disk Drives ( VI )
2 channels
Channel 1
3.5"x1" 3.5"x1" 3.5"x1"
1
8
PCI-X long 64 Bit / 100 MHz hot-plug
SCSI-ID 0
SCSI-ID 1
SCSI-ID 2
Channel 0
1
7
PCI-X long 64 Bit / 100 MHz hot-plug
3.5"x1"
3.5"x1"
3.5"x1"
SCSI-ID 0
SCSI-ID 1
SCSI-ID 2
2
6
PCI long 64 Bit / 66 MHz hot-plug
Hot-plug power supply 500W ( I )
3
5
PCI-X long 64 Bit / 100 MHz hot-plug
3. PS
2. PS
1.PS
4
4
PCI-X long 64 Bit / 100 MHz hot-plug
Interface: WIDE SCA (80 pins)
5
3
PCI-X long 64 Bit / 100 MHz hot-plug
6
2
PCI long 32 Bit / 33 MHz
6
1
PCI long 32 Bit / 33 MHz
Memory ( III )
The highest assembled bank
is the hot-spare bank,
if the feature is enabled
Processor ( II )
Processors must be plugged
in order according the picture
Xeon MP 3
Xeon MP 4
Xeon MP 2
Xeon MP 1
PCI Bus
Slot
5.25"x0.5"
IDE-drive
Bank 4 (4 modules) Bank 3 (4 modules) Bank 2 (4 modules) Bank 1 (4 modules)
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 3 of 12

System configurator and order-informtion guide
Start "PRIMERGY R450"
PRIMERGY R450 Status 2003-10-24
SW Configurator
with OEM-Software without OEM-Software
for PRIMERGY Server for PRIMERGY Server
Later use of OEM operating system
Microsoft does not allowe software is not allowed,
Vmware-Software the use of OEM-software apart from OEM software by
- ESX Server 1.5 (OEM) under ESX. VMware and F5
- ESX Server 2.0 (OEM)(planned) Distributions-/ retailware is
- Virtual SMP for ESX 2.0 (OEM) allowed.
For all SW products listed below please refer to the corresponding software configurator accessible via the
Extranet under "PC Configurations, Configurator for PRIMERGY SW", URL see below
MS - Software: W **) Novell - Software: ***) PRIMECLUSTER *)
- NT 4.0 Server - NetWare 5.1 - Clustering
- NT 4.0 Server Enterprise Edition - NetWare 6 - Load Balancing
- NT 4.0 Server Terminal Server Edition - NetWare 6.5 (planned)
- Windows 2000 Server - NetWare Cluster Services 1.6 and
- Windows 2000 Advanced Server - NetWare Cluster Services 1.7 Linux - Software: **)
- Windows Server 2003, (planned) with FibreCAT - SuSE Linux Enterprise Server: S
Standard Edition CX200, CX400, CX600 - SuSE Professional Linux
Enterprise Edition - Red Hat Enterprise Linux
- Red Hat Professional Linux
SCO - Software: **)
CITRIX-Software für NT: W1 - UnixWare 7
- Multiuser SW MetaFrame
LoadBalancing
additional User Lizenzen
MultiPath, Duplex Data easy Mirror for Linux
Manager for NT; W2K; Linux NT 4, WIN 2000
FSC System Management *) Pay attention to release information on datasheet under
Software: V
http://www.primecluster.com
- RemoteView Software
- RemoteView Service Board
- RemoteView Diagnosis **) Pay attention to release and order information in PRINCE -> Operating System
http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm
Backup-Software: U
- ARCserve für NT ***) Supply over distribution or procurement from FSC VP BC Software
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users:
http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm
for partners:
http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm
Continue with PRIMERGY
HW configurator
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 4 of 12

System configurator and order-information guide
Start PRIMERGY R450
PRIMERGY R450 Status 2003-10-24
Section IBasic unit
Rack basic unit 4U including The PRIMERGY R450 basic unit comes with:
1 x Xeon MP CPU - 3 power supply module, hot-plug redundant
2 channel - 2 channel HD PBay with 3 HD bays each
- 1 floppy disk drive 1,44MB
S26361-K845-V200 1,5GHz 1 MB TLC - 2 hot-replace and redundant fans
S26361-K845-V201 1,9GHz 1 MB TLC - a CPU Board for up to 4x Xeon CPUs
S26361-K845-V202 2 GHz 2 MB TLC - a Memory Board for 16 memory slots
- I/O section with
- System Management Processor
- Dual LVD/U3W-SCSI controller (Adaptec 7899)
- VGA graphics 8 MB ATI
- LAN 10/100 Mbit with RJ45 connector (Intel 82559)
- 5 64bit / 100 MHz PCI-x slots, 1 64bit / 66 MHz slot, all hot-plug
- 2 32bit / 33 MHz long PCI slots
- ServerStart packet incl. ServerBooks CD,
ServerSupport CD and ServerView
Mounting kit for PRIMERGY R450
- 1 pair of telescopic rails (730-810mm)
- 1 pair of carrier rails
- 1 bracket PC-Rack
- 1 cable management PC-racks
Mounting kit for mounting of servers in FSC 19" PRIMECENTER- racks
and all server racks conforming to EIA standard EIA-310-D for 19" racks.
Therefore the mounting kit is variable in deepth from 730-810mm
PRIMERGY PRIMECENTER- Rack
External Interfaces External Interfaces for ServerManagement
SNP:SY-F1647E301-P 2 x RS-232-C (serial, 9 pin) 1 x RS-232-C (serial, 9 pin)
Installation ex works for one 1x Centronics (parallel, 25 pin, 1 x RJ45 LAN
server or subsystem. EPP/ECP compatible) 1 x Power Jack
Hereby the rack will be delivered 1 x keyboard (PS/2)
completely pre-mounted and 1 x mouse (PS/2)
all wired connections are tested. 1 x VGA (15 pin)
With racks 12U, 24U, 38U: 1 x USB Frontside
Systems and components 2 x USB Backside
will be delivered installed in the rack 1 x RJ45 LAN
With racks 46U:
Systems and components
will be delivered separately "Rack-mounting ex factory"
To be ordered only together with This service is to be ordered once
a PRIMERGY- per installable server/storage
PRIMECENTER rack subsystem, in order to get the
e.g.: server/storage subsystem
S26361-K826-V10x mounted into the PRIMERGY racks.
refer configurator PC-Rack In case of the 46 U PRIMERGY Rack,
max. 1x per System this service has to be ordered,
to get the mounting kits and the
cables installed
PRIMERGY 42/23U Rack
important notice ! This kit can be ordered,
the mounting kit for PRIMERGY R450 if it is planned to mount the rack
is included the basic version and version in an already available
will be delivered with every R450 FSC 42/23U rack
S26361-F1331-L141
Mounting kit for 42/23U rack
- 1 pair of carrier rails
- 1 pair of telescopic rails
- 1 cable carrier
max. 1x per system
A
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 5 of 12

System configurator and order-information guide
A
PRIMERGY R450 Status 2003-10-24
There are 3 bays for hot-plug power supplies, each with 500W
Each basic unit contains 3 modules and provides redundancy
for a fully equipped system
Section II Processor
A mix of processors with different clock frequency and different On-Chip cache cannot be used
The multi-processor system premises a multi-processor operating system
Terminators are not necessary
S26361-F2817-E151 S26361-F2817-E191 S26361-F2817-E202
XEON MP 1,5GHz XEON MP 1,9GHz XEON MP 2GHz
up to with 1 MB TLC on Chip, with 1 MB TLC on Chip, with 2MB TLC on Chip,
3x heat sink and "Easy retention" heat sink and "Easy retention" heat sink and "Easy retention"
occupies slot for one CPU occupies slot for one CPU occupies slot for one CPU
max. 3x per system max. 3x per system max. 3x per system
Section III Memory
There are 16 memory slots available (4 banks, 4 modules each)
They can optionally be equipped with 128 MB, 256 MB, 512 MB or 1GB registered DDR-RAM modules (PC1600)
The maximal extension is 16 GB with today available 1GB modules!
Any mix of modules within one memory bank is not allowed
ECC with memory scrubbing and chipkill is standard
Optional hot-spare memory functionality can be configured in the BIOS (redundant memory bank 3 + 1)
S26361-F2550-E542 S26361-F2550-E543 S26361-F2550-E544 S26361-F2550-E545
Main memory 512MB Main memory 1024MB Main memory 2048MB Main memory 4096MB
PC1600 registered DDR RAM PC1600 registered DDR RAM PC1600 registered DDR RAM PC1600 registered DDR RAM
4x consisting of 4 modules consisting of 4 modules consisting of 4 modules consisting of 4 modules
occupies one bank occupies one bank occupies one bank occupies one bank
max. 4x per system max. 4x per system max. 4x per system max. 4x per system
Section IV Graphics
B
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 6 of 12

System configurator and order-information guide
B
PRIMERGY R450 Status 2003-10-24
Section VAccessible drives
SNP:SY-F2313E1-P SNP:SY-F2312E1-P A CD-ROM or DVD-ROM drive is required for
CD-ROM 0,5" 24xATAPI DVD drive 0,5" installing the system with "Sever Start"
1x Connector: LD50 8/24x or faster supplied with the system unit!
incl. description (Ger/US) anthracite bezel Note: There is no
0.5" * 5.25", anthracite bezel occupies one drive bay CD-ROM in the
max. 1x per system max. 1x per system basic unit!
Section VI Hard Disk Drives
while stocks last
SNP:SY-F2336E118-P SNP:SY-F2336E136-P
Hard disk 18GB Hard disk 36GB
10000rpm, <7ms, min. 4MB Cache 10000rpm, <7ms, min. 4MB Cache
U160 SCSI (160 MB/sec) U160 SCSI (160 MB/sec)
Interface: WIDE SCA (80 pins) Interface: WIDE SCA (80 pins)
hot pluggable drive hot pluggable drive
occupies 1" bay occupies 1" bay
max. 6x per system max. 6x per system
S26361-F2336-E173 S26361-F2336-E114
Hard disk 73GB Hard disk 146GB
10000rpm, <7ms, min 8MB Cache 10000rpm,<5,5ms,min. 8MB Cache
U160 SCSI (160 MB/sec) Ultra 160 SCSI (160MB/s)
Interface: WIDE SCA (80 pins) Interface: Wide SCA (80-pins)
hot pluggable drive hot pluggable drive
occupies 1" bay occupies 1" bay
max. 6x per system max. 6x per system
S26361-F2336-E518 S26361-F2336-E536 S26361-F2336-E573
Hard disk 18GB Hard disk 36GB Hard disk 73GB
15000rpm, <4ms, min. 8MB Cache 15000rpm, <4ms, min. 8MB Cache 15000rpm, <4ms, min. 8MB Cache
Ultra 160 SCSI (160MB/s) Ultra 160 SCSI (160MB/s) Ultra 160 SCSI (160 MB/sec)
Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins)
hot pluggable drive hot pluggable drive hot pluggable drive
max. 6 occupies 1" bay occupies 1" bay occupies 1" bay
max. 6x per system max. 6x per system max. 6x per system
S26361-F2764-E136 S26361-F2764-E173 S26361-F2764-E114
Hard disk 36GB Hard disk 73GB Hard disk 146GB
10000rpm,<5,5ms, 8MB Cache 10000rpm,<5,5ms, 8MB Cache 10000rpm,<5,5ms, 8MB Cache
Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins)
hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray
occupies 1" bay occupies 1" bay occupies 1" bay
SCSI/RAID controller necessary SCSI/RAID controller necessary SCSI/RAID controller necessary
max. 6x per system max. 6x per system max. 6x per system
S26361-F2764-E518 S26361-F2764-E536 S26361-F2764-E573
Hard disk 18GB Hard disk 36GB Hard disk 73GB
15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache
Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins)
hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray
occupies 1" bay occupies 1" bay occupies 1" bay
SCSI/ RAID controller necessary SCSI/ RAID controller necessary SCSI/ RAID controller necessary
max. 6x per system max. 6x per system max. 6x per system
C
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 7 of 12

System configurator and order-information guide
C
PRIMERGY R450 Status 2003-10-24
Section VII SCSI-/Fibre-channel controller
A. on-board SCSI Controller for internal hard disks
2-channel U160-SCSI controller on-board; included as standard
The following cabling is standard, if no Disk Array Controller is used
1. Channel A of the U160 controller is connected to the 1st backplane for 3 HDs
2. Channel B of the U160 controller is connected to the 2nd backplane for 3 HDs
S26361-F2287-E15 This interface is only configurable if a RAID Controller
External on-board SCSI Interface besides the 0-channel RAID Controller is used
Cable and external See section Disk Array Controlller
connector interface
max. 2x per system for external
B. SCSI - controller for external hard disk extensions and external peripheral devices.
while stocks last
SNP:SY-F1722E1-P S26361-F2399-E1 Controller for the connection of a EMC
SCSI Controller UW, DE SCSI U160 Controller Symmetrix (only available as option)
Adaptec 2944UW (HBA) Adaptec SCSI card 29160 Supported only in Microsoft Windows
1 channel differential-ended 1 channel: LVD+Fast/Ultra (decoup.) NT and Windows 2000 operating
max. 40MB/s; without cable LVD con. for HD, withoud cable systems
4x 32/33 PCI, min. 170mm Fast/Ultra con. access. drives
int: LD50 + HD68, ext: HD68(S) 64/66 (32/33) PCI, min. 180mm
SW: int: Fast 50-pin or Ultra HD68
max. 2x per system + LVD HD68; ext: HD68(LVD)
SW:
max. 2x per system
5x C. Fibre Channel controller for subsystems and SAN
while stocks last while stocks last
SNP:SY-F2244E1-P SNP:SY-F2244E2-P
1GBit/s FC Controller 1GBit/s FC Controller
Qlogic Qlogic
QLA 2200 QLA 2200F, full height braket
1 Channel 1GBit/sec FC Controller 1 Channel 1GBit/sec FC Controller
CU (copper) Interface MMF(Multimode Fibre) Interface
incl. SW and description (Ger/US) incl. SW and description (Ger/US)
PCI 64Bit / 66MHz, 175mm PCI 64Bit / 66MHz, 175mm
3.3V and 5V tolerant signaling 3.3V and 5V tolerant signaling
4x max. 4x per system max. 4x per system while stocks last
S26361-F2843-E1 S26361-F2624-E1 suitable for
2GBit/s FC Controller 2GBit/s FC Controller 64Bit/66MHz
Emulex Emulex PCI-Slot
LP9802 LP9002L
1 Cannel 2GBit/sec FC Controller 1 Channel 2GBit/sec FC Controller Attention
LC Interface for 50um Fiber LC Interface for 50um Fibre 2GBit/s FC Controller
PCI 64Bit / 133MHz, 170mm PCI 64Bit / 66MHz, 170mm require other interface
3.3V and 5V tolerant signaling 3.3V and 5V tolerant signaling connectors for the
max. 4x per system max. 4x per system optical cables than
freigegeben 1GBit/s fibre channel.
SNP:SY-F1826L1-P Supported only in Microsoft
FC Ctrl for EMC2 Attachment Windows NT and
Emulex LP8000 Windows 2000 operating There are other components
1 channel 100MB/s systems. such as switches, GBICs
MMF (Multimode Fibre) Interface or cables which can be
Connector: Duplex SC Controller for the connection ordered for fibre channel SAN
without cable, order seperately of a EMC Symmetrix, FibreCAT attachments. (see price list)
incl. SW a. description (Ger/US) (only available as option)
PCI 64Bit/33MHz controller
max. 4x per system
All controllers for the connection of external storage systems are delivered without cables
to be continued For the configuration of external cabling see the configurator for external storage systems
on next page
D
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 8 of 12

System configurator and order-information guide
D
PRIMERGY R450 Status 2003-10-24
Section VIII Disk Array
D. 0-channel Ultra RAID Controller
The following cabling is standard, if any Disk Array Controller is used
1. Channel A of the RAID Controller is connected to the 1st backplane for 3 HDs
2. Channel B of the RAID Controller is connected to the 2nd backplane for 3 HDs
S26361-F2728-E48 zero-channel RAID Controller Adaptec 2000S
Zero-channel RAID Controller is always to be installed in slot 6
Adaptec
2000 S
48MB SDRAM ECC Cache
in combination with on-board
U160 SCSI Controller
without cable S26361-F2569-E64
incl. SW and description (Ger/US) 2-channel RAID Controller U160
64/66 PCI Controller Mylex / LSI
3.3V signaling AcceleRAID 352 (Leopard)
max. 1x per system 64MB SDRAM ECC Cache
BBU optional
Connector: internal 2x HD68;
S26361-F2385-E32 The cables for the connection of the external: 2x VHDCI
2-channel RAID Controller U160 RAID Controller to the disks in the system without cable
Adaptec are included within the basic unit. incl. SW and description (Ger/US)
3200 S 64/33 PCI Controller, 330mm
32MB SDRAM ECC Cache The cables of the connection from the 3.3V and 5V tolerant signaling
BBU optional subsystems (SX30 / S60) to the RAID max. 4x per system
connector: int. 2x HD68; Controllers, see configurator SX30 / S60
ext. 2x VHDCI
without cable S26361-F2569-E10
incl. SW and description (Ger/US) RAID Ctrl, Battery Backup Unit 4x
64/33 PCI Controller, 330mm max. 1x per Controller
3.3V and 5V tolerant signaling
max. 4x per system
S26361-F2386-E32 S26361-F2190-E128
RAID Ctrl, Cache Upgrade 32MB 4-channel RAID Controller U160
32 MB SDRAM ECC Cache Mylex / LSI
max. 1x per Controller eXtremeRAID 2000 (Big Apple)
128MB SDRAM ECC Cache
BBU
S26361-F2386-E10 connector: internal: 2x HD 68;
RAID Ctrl, Battery Backup Unit external: 4x VHDCI
max. 1x per Controller incl. SW and description (G/USA)
4x
64/33 PCI Controller, 330 mm
3.3V and 5V tolerant signaling
as soon as available max. 4x per system
S26361-F2752-E128
2-channel RAID Controller U320
Adaptec
2200S
128MB SDRAM ECC Cache
BBU optional
plug: internal 2x HD68;
external: 2x VHDCI
without cable
incl. SW and description (Ger/US)
64/66 PCI controller, 180mm
3.3V and 5V tolerant signaling
Max. 8 controllers max. 4x per system
in basic unit
to be continued S26361-F2752-E10
on previous page Cache Battery Backup Unit
max. 1x per controller
The fitting connection cables can be found in the
configurator "external storage systems"
E
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 9 of 12

System configurator and order-information guide
E
PRIMERGY R450 Status 2003-10-24
Section IX Communication / Network
on-board LAN Controller
Fast Ethernet Contr. on-board The Intel LAN controllers 10/100TX, 1000SX, 1000TX
Intel Ethernet Express Pro100+ can be used with the on-board controller in Teaming Mode.
Server Adapter, Intel
ext: for RJ 45-connector
SW: AFT, VLAN, Fast Channel
A) Adapters with Teaming capability 10-1000TX/SX
S26361-F2643-E1 S26361-F2839-E1
Fast Ether. Contr. 10/100TX Gigabit Ethernet Contr. 1000TX
Intel 100S Server Adapter Intel Pro/1000 MT Adapter
AFT unter NT, W2k, NW also PCI 32 (33/66MHz), min 122 mm
with on-board LAN, WOL, load bal. ext: for RJ45-plug, Cat 5
32/33 PCI , min 120 mm, hp connection with Cat 5 cabling
ext: for RJ45-connector SW: VLAN, Fast Etherchannel
SW: VLAN, Fast Etherchannel max. 4x per System
max. 4x per system
S26361-F2732-E1 S26361-F2730-E2
Gigabit Ethernet Contr. 1000SX Gigabit Ethernet Contr.1000TX-G2
Intel Pro/1000 XF Server Adapter Intel Pro/1000 XT Server Adapter
Adapter Teaming Support Adapter Teaming Support
4x PCI-X (all PCI slots), min 163 mm PCI-X (all PCI slots), min 163 mm
ext: for Duplex SC-connector ext: for RJ45-Connector, Cat 5
Connection with Cat 5 cabling
SW: VLAN, Fast Etherchannel SW: VLAN, Fast Etherchannel
max. 4x per system max. 4x per system
freigegeben.
B) Dual Port Adapter 100TX IPsec with 3DES (156 bit key) has export
S26361-F2606-E1 restriction for several countries.
Fast Ethernet dual 10/100TX IPsec No restriction to countries of the EU and:
Intel Pro 100S Dual Port Server - Australia,
Controller with IPsec 3DES - Canada,
AFT under NT, W2k, NW also - Czech Republic,
with on-board LAN, WOL, load bal. - Hungary
64/66 bit PCI, min 120 mm, hp - Japan,
ext: for 2 x RJ45-connector - New Zealand,
SW: VLAN, Fast Etherchannel - Norway,
max. 2x per system - Poland,
- Switzerland,
- United States
C) Token Ring Adapter
while stocks last
S26361-F2117-E502
Token Ring Controller
Smart Ringnode MK4
100/16/4 Mbit, Madge
2x AFT (NT4, W2K) with 2 Contr.,
2 redundant rings with 4 contr.
32/33 PCI, min. 164 mm
ext: for RJ45 or SUB-D9-plug
SW:
max. 2x per system
F
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 10 of 12

System configurator and order-information guide
F
PRIMERGY R450 Status 2003-10-24
Section XSystem Management Products (RemoteView)
S26361-F1790-E219 without graphical
RemoteView Software V3.10 console redirection
remote maintenance software, manual
S26361-F2116-E8 RemoteView external Power Supply
RemoteView Diagnosis S26361-F2425-L300
IDE Chipdisk incl. power cord (with cold device- and Euro plug)
at the on-board IDE-Controller
occupies 1* IDE slot
max. 1x pro System
S26361-F2425-E220
RemoteView Battery Backup Unit
for on-board
System Management Processor
max. 1x per system
Section XI Miscellaneous
S26361-F1652-L4 In connection with rack configurations
Modem external 56kbps (V.90) the install variant of the modem
MultiTech (S26361-F1652-E4) has to be ordered
MT5643ZBA-Global (see rack configurator)
international approval
incl. 2m Telephon cord RJ11/RJ11
Adapter Plug RJ11/TAE
Serial Interface cable DB25m / DB9f
AC-Adapter w. German Power Cord
occupies one COM port
max. 1x per system
needed for RemoteView
Section XII National accessories packs
Options and other peripherals
For other options, refer to separate "Product specific options"
These options are supplied lose with the shipment
For suitable peripherals for this product, please refer to the section "Peripherals/communication"
Country specific power cords are not required for rack versions, except for USA&Canada.
Power cords are shipped in a rack version with inlet connector for non-heating apparatus.
Description in englisch. Both included in basic unit.
(1x with Standard PSU, 3x with hot plug upgrade)
T26139-Y1742-L10 USA, Canada
For shipments to USA&Canada, you have to order
one power cord (1,8m, grey) per power supply.
End PRIMERGY R450
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 11 of 12

System configurator and order-information guide
PRIMERGY R450 Status 2003-10-24
Change report
Date
Order number
Change
2003-08-13 S26361-F2764-E573 Hard disk 73GB 15.000rpm Ultra 320 SCSI - now available
2003-08-13 S26361-F2764-E536 Hard disk 36GB 15.000rpm Ultra 320 SCSI - now available
2003-08-13 S26361-F2764-E518 Hard disk 18GB 15.000rpm Ultra 320 SCSI - now available
2003-08-13 S26361-F2764-E114 Hard disk 146GB 10.000rpm Ultra 320 SCSI - now available
2003-08-13 S26361-F2764-E173 Hard disk 73GB 10.000rpm Ultra 320 SCSI - now available
2003-08-13 S26361-F2764-E136 Hard disk 36GB 10.000rpm Ultra 320 SCSI - now available
2003-08-13 S26361-F2752-E10 Cache Battery Backup Unit - now available
2003-08-13 S26361-F2752-E128 2-channel RAID controller U320 Adaptec 2200S - now available
2003-07-22 S26361-F2730-E2 Gigabit Ethernet Controller 1000TX-G2 - now available
2003-07-22 S26361-F2730-E1 Gigabit Ethernet Controller 1000TX - no longer available
2003-06-24 S26361-F2843-E1 2GBit/s FC Controller Emulex LP9802 - now available
2003-05-22 T26139-Y1742-L10 Power cord for direct deliverys to USA, Can - now available
2003-04-25 S26361-F2336-E573 Hard disk 73 GB 15000rpm, U160 SCSI - now available
2003-03-19 S26361-F2839-E1 Gigabit Ethernet Contr. 1000TX Intel Pro/1000 MT Adapter - now available
2003-02-12 S26361-F2606-E1 Dual Fast Ethernet 10/100TX Ipsec - max. 2x per system possible
2003-01-24 Section Communication / Network: Number of Ethernet Controllers changed
2003-01-22 S26361-F2336-E114 Hard disk 146GB 10000rpm - now available
2002-12-12 S26361-F2636-E361 3 Xeon Processors - 1,6GHz 1MB TLC - Special action - no longer available
2002-12-12 S26361-F2636-E350 3 Xeon Processors - 1,5GHz 512KB TLC - Special action - no longer available
2002-12-12 S26361-F2636-E161 Xeon Processor MP 1,6GHz 1MB TLC - no longer available
2002-12-12 S26361-F2636-E150 Xeon Processor MP 1,5GHz 512KB TLC - no longer available
2002-12-12 S26361-F2636-E140 Xeon Processor MP 1,4GHz 512KB TLC - no longer available
2002-12-12 S26361-K845-V102 Basic Unit 1,6GHz 1MB TLC - no longer available
2002-12-12 S26361-K845-V101 Basic Unit 1,5GHz 512KB TLC - no longer available
2002-12-12 S26361-K845-V100 Basic Unit 1,4GHz 512KB TLC - no longer available
2002-10-23 S26361-F2636-E361 3 Xeon processors - 1,6GHz/1Mb - special action - now available
2002-10-23 S26361-F2636-E350 3 Xeon processors - 1,5GHz/512Kb - special action - now available
2002-10-15 S26361-F2817-E151
S26361-F2817-E191
S26361-F2817-E202
new processors: 1,5GHz 1 MB iL3 - now available
1,9GHz 1 MB iL3
2 GHz 2 MB iL3
2002-10-15 S26361-K845-V200
S26361-K845-V201
S26361-K845-V202
new basic units: 1,5GHz 1 MB iL3 - now available
1,9GHz 1 MB iL3
2 GHz 2 MB iL3
2002-08-21 S26361-F2636-E350 3x XEON 1,5GHz/512 - no longer available
2002-08-20 S26361-F2425-L300 RemoteView external Power Supply inclusive power cable G and power cable rack - now available
power cable UK/US removed
2002-08-19 S26361-F1652-L4 Modem extern 56kbps (V.90); Multitech - now available
2002-08-19 SNP:SY-F1652L3-A Modem extern 56kbps (V.90); Microlink - no longer available
2002-07-23 Section VII B. SCSI - controller for external hard disk extensions ... - now 4x available
2002-06-24 SNP:SY-F2244E2-P FC Controller 66MHz, MMF Interface - available further on
2002-06-24 SNP:SY-F2244E1-P FC Controller 66MHz, Cu Interface - available further on
2002-06-14 Rack mounting: universal installation kit - now available
2002-04-18 S26361-F2636-E361 Special action 3 Xeon processors 1,6GHz - now available
2002-04-18 S26361-F2636-E350 Special action 3 Xeon processors 1,5GHz - now available
2002-03-14 First release
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 12 of 12