Fujitsu Inverter ART Series User manual

DUCT TYPE / ART Series
PART NO. 9374379385
OPERATING MANUAL
AIR CONDITIONER
KEEP THIS OPERATION MANUAL
FOR FUTURE REFERENCE
R410A
REFRIGERANT
This Air Conditioner contains and operates
with refrigerant R410A .
THIS PRODUCT MUST ONLY BE INSTALLED OR SERVICED
BY QUALIFIED PERSONNEL.
Refer to Commonwealth, State, Territory and local legislation,
regulations, codes, installation & operation manuals, before
the installation, maintenance and/or service of this product.
9374379385.indd 1
9374379385.indd 1
11/3/09 8:48:25 AM
11/3/09 8:48:25 AM

1
CONTENTS
SAFETY PRECAUTIONS........................................ 1
NAME OF PARTS .................................................. 2
PREPARATORY OPERATION ................................. 3
OPERATION ........................................................... 4
TIMER FUNCTIONS ............................................... 6
ON/OFF TIMER....................................................... 6
WEEKLY TIMER...................................................... 7
SAFETY PRECAUTIONS
zDo not attempt to install this air conditioner by yourself.
zThis unit contains no user-serviceable parts. Always consult authorized service person-
nel for repairs.
zWhen moving, consult authorized service personnel for disconnection and installation
of the unit.
zDo not become over-exposed to cold air by staying in the direct path of the airflow of
the air conditioner for extended periods of time.
zDo not insert fingers or objects into the outlet port or intake grilles.
zDo not start and stop air conditioner operation by turning off the electrical breaker and
so on.
zIn the event of a malfunction (burning smell, etc.), immediately stop operation, turn
off the electrical breaker, and consult authorized service personnel.
zIn the event of the refrigerant leakage, be sure to keep it away from fire or any flam-
mables (consult an authorized service personnel).
zProvide occasional ventilation during use.
zDo not direct air flow at fireplaces or heating apparatus.
zDo not set flower vases or water containers on top of air conditioners.
zDo not expose the air conditioner directly to water.
zDo not operate the air conditioner with wet hands.
zDo not touch the switches with sharp objects.
zTurn off power source when not using the unit for extended periods.
zAlways turn off the electrical breaker whenever cleaning the air conditioner or chang-
ing the air filter.
zConnection valves become hot during Heating; handle with care.
zCheck the condition of the installation stand for damage.
zDo not place animals or plants in the direct path of the air flow.
zWhen restarting after a long period of disuse in the winter, turn the power switch on
at least 6 hours before starting the unit.
zDo not drink the water drained from the air conditioner.
zDo not use in applications involving the storage of foods, plants or animals, precision
equipment, or art works.
zDo not apply any heavy pressure to radiator fins.
zOperate only with air filters installed.
zDo not block or cover the intake grille and outlet port.
zEnsure that any electronic equipment is at least one metre away from either the indoor
or outdoor units.
zAvoid installing the air conditioner near a fireplace or other heating apparatus.
zWhen installing the indoor and outdoor units, take precautions to prevent access by
infants.
zDo not use inflammable gases near the air conditioner.
zInstall the drain hose so that it drains water properly.
zBefore using the appliance, read these “SAFETY PRECAUTIONS” thoroughly and operate in the correct way.
zThe instructions in this section all relate to safety; be sure to maintain safe operating conditions.
z“DANGER”, “WARNING” and “CAUTION” have the following meanings in these instructions:
TEMPERATURE SET BACK TIMER ....................... 9
CLEANING AND CARE ........................................ 10
TROUBLESHOOTING .......................................... 10
OPERATING TIPS ................................................. 12
SELF-DIAGNOSIS ................................................ 14
TEMPERATURE AND HUMIDITY RANGE .......... 14
DANGER! This mark indicates procedures which, if improperly performed, are most likely to
result in the death of or serious injury to the user or service personnel.
WARNING! This mark indicates procedures which, if improperly performed, might lead to the
death or serious injury of the user.
CAUTION! This mark indicates procedures which, if improperly performed, might possibly result
in personal harm to the user, or damage to property.
DANGER!
CAUTION!
9374379385.indd Sec1:1
9374379385.indd Sec1:1
11/3/09 8:48:26 AM
11/3/09 8:48:26 AM

2
NAME OF PARTS
Remote controller
1START/STOP Button
2SET TEMP. (Temperature) Button
3MODE Button
4FAN Button
5ECONOMY Button
6TIMER MODE (CLOCK ADJUST)
Button
7DAY (DAY OFF) Button
8SET BACK Button
9Set Time Button
!TIMER DELETE Button
"TIMER SET Button
#Vertical Airflow Direction and
Swing Button*1
$Horizontal Airflow Direction and
Swing Button*2
%FILTER RESET Button*3
&Operation Lamp
(Timer and Clock Display
)Operation Mode Display
~Fan Speed Display
+Operation Lock Display
,Temperature Display
-Function Display
Defrost Display
Thermo Sensor Display
Economy Display
*1~3 These functions cannot be used.
o
i
u
p
a
t
1
e
5
r
q
0
3
4
w
8
6
2
y
9
7
9374379385.indd Sec1:2
9374379385.indd Sec1:2
11/3/09 8:48:27 AM
11/3/09 8:48:27 AM

3
PREPARATORY OPERATION
Press the TIMER MODE (CLOCK
ADJUST) button for 2 seconds
or more. The time display on the
remote controller will flash.
2
SU MO TU WE TH FR SA
Press the DAY button and select the current day.
A appears around the selected day.
Press the set time buttons to set the current time.
Press repeatedly to adjust the current time in 1-
minute increments. Press and hold to adjust the
current time in 10-minute increments.
ex. Monday PM11:00
Press again to end.
SU MO TU WE TH FR SA
1
3
5
Press the SET BACK button to switch between the
12- and 24-hour time displays.
3
4
SU MO TU WE TH FR SA SU MO TU WE TH FR SA
SET BACK
Set the current day and time
9374379385.indd Sec1:3
9374379385.indd Sec1:3
11/3/09 8:48:28 AM
11/3/09 8:48:28 AM

4
OPERATION
AUTO COOL DRY *HEATFAN
Temperature setting range
AUTO ............................................... 18 to 30 °C
COOL/DRY ....................................... 18 to 30 °C
*HEAT ................................................ 16 to 30 °C
Lower Rise
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the START/STOP button.
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
Press the SET TEMP. buttons to set the room temperature.
Press the FAN button to set the fan speed.
Press the ECONOMY button to start or stop ECONOMY OPERA-
TION.
For details on the function, refer to page 12.
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
To start/stop operation
To set the operation mode
zOperation mode setting
zRoom temperature setting
zFan speed setting
ECONOMY OPERATION
!54/ -%$()'( ,/7
9374379385.indd Sec1:4
9374379385.indd Sec1:4
11/3/09 8:48:29 AM
11/3/09 8:48:29 AM

5
Press the DAY (DAY OFF) button and TIMER SET button
simultaneously for 2 seconds or more to activate the
child lock function and lock all buttons on the remote
controller. Press the buttons again for 2 seconds or more
to deactivate the child lock function.
When the child lock function is activated, the mark
appears. If any button is pressed during the child lock, the
CL display and flash.
Press the ECONOMY button for more than 2 seconds to se-
lect whether the room temperature is detected at the indoor
unit (remote sensor) or the remote controller.
When the thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
• This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service
personnel when using this function.
• If this function is locked, the location where the room temperature is detected cannot be changed and the
mark flashes when the ECONOMY button is pushed for 2 seconds or more.
Indoor unit
Room temperature sensor selection
OPERATION
Child lock function
9374379385.indd Sec1:5
9374379385.indd Sec1:5
11/3/09 8:48:30 AM
11/3/09 8:48:30 AM

6
To set the ON/OFF timer
TIMER FUNCTIONS
OFF timer (See page 6.)
Use this timer function to stop air conditioner operation. The timer operates and air conditioner operation stops
after the set time has passed. The timer can be set up to 24 hours in advance.
ON timer (See page 6.)
Use this timer function to start air conditioner operation. The timer operates and air condition operation starts
after the set time has passed. The timer can be set up to 24 hours in advance.
WEEKLY timer (See page 7.)
Use this timer function to set operating times for each day of the week.
Use the DAY OFF setting to switch off timed operation for a selected day in the coming week.
Because all days can be set together, the weekly timer can be used to repeat the timer settings for all of the
days.
Temperature SET BACK timer (See page 9.)
Use this timer function to change the set temperature in the operation times set for each day of the week.
This can be used together with other timer settings.
ON/OFF TIMER
Press the TIMER MODE button to
select the ON timer or OFF timer.
2
• Press the TIMER DELETE button to cancel the timer mode.
• The timer mode can also be canceled by changing the timer mode using the TIMER MODE
button.
1
NON
STOP
OFF
TIMER
ON
TIMER
WEEKLY
TIMER
No display
SU MO TU WE TH FR SA
Press the set time buttons to set the time.
After the time is set, the timer will start automatically.
The amount of time until the OFF timer operates that is
displayed on the timer display decreases as time passes.
From 1 to 24 hours ex. OFF timer set for 6 hours
zTo cancel
9374379385.indd Sec1:6
9374379385.indd Sec1:6
11/3/09 8:48:30 AM
11/3/09 8:48:30 AM

7
SU MO TU WE TH FR SA
369 12 15 18 21
WEEKLY TIMER
Press the TIMER MODE button to select the weekly timer.
2
Press the TIMER SET button for
2 seconds or more.
1
3
SU MO TU WE TH FR SA
369 12 15 18 21
zDay of the week setting
Press the DAY button to select the day of the week, and then press the
TIMER SET button to confirm the setting.
For ALL, all of the days can be set together when a appears around
each day.
ALL SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
369 12 15 18 21
4zTime setting
Press the set time buttons to set the time, and then press theTIMER SET
button to confirm the setting and proceed to the next ON or OFF time
setting.
Up to two ON and OFF times can be set per day.
Press the DAY button to complete the time setting and return to the day
of the week setting.
When the operating time is set, the
mark appears.
5
Repeat steps 3and 4.
To complete the weekly timer settings, press the
TIMER SET button for 2 seconds or more.
zTo delete the operating time
If the TIMER DELETE button is pressed
during steps 3or 4, the operating time
for the selected day will be deleted.
If all the days are selected, the operating
times for all of the days will be deleted.
NOTES
• The operating time can be set in 30-minute increments only.
• The OFF time can be carried over to the next day.
• The ON timer and the OFF timer functions cannot be set using the weekly timer. Both an ON and OFF time must be
set.
ON-1 OFF-1 ON-2 OFF-2
ex. The timer is set for 7:00-18:00.
12
123
Weekly timer setting
9374379385.indd Sec1:7
9374379385.indd Sec1:7
11/3/09 8:48:31 AM
11/3/09 8:48:31 AM

8
SU MO TU WE TH FR SA
369 12 15 18 21
SU MO TU WE TH FR SA
369 12 15 18 21
WEEKLY TIMER
zTo start
When the weekly timer is selected, the
timer starts automatically.
The operating time for the current
day is displayed.
zTo cancel
• Press the TIMER DELETE button to
cancel the timer mode.
• The timer mode can also be canceled
by changing the timer mode using
the TIMER MODE button.
1
During the weekly timer,
press the TIMER SET button
for 2 seconds or more to set
the day.
Select the day to set the
DAY OFF.
Press the DAY (DAY OFF)
button for 2 seconds or
more to set the DAY OFF.
Press the TIMER SET but-
ton for 2 seconds or more
to complete the DAY OFF
setting.
243
zTo cancel
Follow the same procedures as those
for setup.
ex. The DAY OFF is set for Monday.
NOTES
• The DAY OFF setting is only available for days for which weekly settings already exist.
• If the operating time carries over to the next day (during a next day setting), the effective DAY OFF range will be set as
shown below.
zNormal zNext day setting
Setting dayPreceding day Next day Setting dayPreceding day Next day
• The DAY OFF setting can only be set one time. The DAY OFF setting is cancelled automatically after the set day has
passed.
The mark flashes under a day of the week.
ON OFF ON OFF
DAY OFF
WEEKLY WEEKLY
WEEKLY
WEEKLY
ON OFF ON OFF
DAY OFF
SU MO TU WE TH FR SA
369 12 15 18 21
369 12 15 18 21
ex. Operating time 7:00-18:00
WEEKLY timer operation
To set the DAY OFF (for a holiday)
9374379385.indd Sec1:8
9374379385.indd Sec1:8
11/3/09 8:48:32 AM
11/3/09 8:48:32 AM

9
TEMPERATURE SET BACK TIMER
Press the SET BACK button to change to the SET BACK con-
firmation display.
The SET BACK operating time and the set temperature will
be displayed.
2
Press the TIMER SET button
for 2 seconds or more.
1
3zDay setting zOperating time setting
Follow the same procedures to set the operating time as those for the weekly timer. The TIMER DELETE button is
also used as described in the procedures for the weekly timer.
4
NOTES
• The SET BACK timer only changes the set temperature, it cannot be used to start or stop air conditioner operation.
• The SET BACK timer can be set to operate up to two times per day but only one temperature setting can be used.
• The SET BACK timer can be used together with the ON, OFF, and weekly timer functions.
• The SET BACK operating time is displayed only in the SET BACK confirmation display. (Refer to step 1 for the SET BACK
confirmation display.)
SET BACK
SU MO TU WE TH FR SA
369 12 15 18 21
SU MO TU WE TH FR SA
369 12 15 18 21
ex. When setting all days together
zTemperature setting Press the SET TEMP. buttons to set the
temperature. (The temperature setting
range is the same as the range for the
operation mode.)
ex. Operating time 15:00–22:00
5
Repeat steps 3and 4.
Press the TIMER SET button for
2 seconds or more to complete
the temperature SET BACK timer
settings.
ON OFF
24°C24°C
28°C
SET BACK temperature
Normal temperature
zTo start
SET BACK
Press the SET BACK button. The SET BACK confirmation display appears
for 5 seconds, and then the timer starts automatically.
ex. Display during SET BACK timer operation
(The operating time will not be displayed.)
zTo cancel
Press the SET BACK button, and then
press the TIMER DELETE button while
the SET BACK confirmation display is
displayed. Even if the SET BACK but-
ton is pressed again, the SET BACK
timer will be cancelled.
SU MO TU WE TH FR SA
369 12 15 18 21
If there is no existing
SET BACK tempera-
ture setting, “- -” will
be displayed for the
temperature.
SU MO TU WE TH FR SA
13
24
12
Temperature SET BACK timer setting
Temperature SET BACK timer operation
9374379385.indd Sec1:9
9374379385.indd Sec1:9
11/3/09 8:48:32 AM
11/3/09 8:48:32 AM