Fujitsu Inverter Halcyon ASU12RMLQ User manual

Model shown on this installation is
ASU12RMLQ.
Other models may be slightly
different.
All manuals and user guides at all-guides.com

Remove screws holding the front
cabinet (3 or 4)
Unlatch the front cover on each side and remove the
front cover
Remove Air & Plasma
Filter
Remove front cabinet by snapping it out from the
top
All manuals and user guides at all-guides.com

Unplug all Plug In wires
Remove all three screws holding the Controller
box in place.
All manuals and user guides at all-guides.com

Slide out the controller box
Plug in hard wire remote to
terminal & re-assemble the
unit.
All manuals and user guides at all-guides.com

Remote control
Cord Terminal cord
Insulated
Connection
Remote control Cord
Part# 9372714010
Terminal cord
Part# 9705932012
Remoter control cord and terminal cord
All manuals and user guides at all-guides.com

Remove the two screws &
remove and the back cover
Connect wire to terminal and close remote
All manuals and user guides at all-guides.com