Fujitsu BX630 - PRIMERGY - S2 Dual User manual

PRIMERGY BX630 S2
Scalable Server Blade
Options Guide
Edition October 2007

Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected].
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2605-001.fm
Copyright © 2009 Fujitsu Technology Solutions GmbH.
All rights reserved. Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trade names and/or trademarks of their respective
manufacturers.

BX630 S2 Options Guide
Contents
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 5
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 5
1.3 Extensions and conversions . . . . . . . . . . . . . . . . . . 7
1.4 Structure of the server blade . . . . . . . . . . . . . . . . . . 8
1.5 Configurations . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.6 Notational conventions . . . . . . . . . . . . . . . . . . . . 12
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 15
4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5.1 Installing a second processor . . . . . . . . . . . . . . . . . 23
6 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.1 Fitting rules . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
6.2 Replacing memory modules . . . . . . . . . . . . . . . . . . 34
7 Optional I/O module . . . . . . . . . . . . . . . . . . . . . . 37
7.1 Installing an I/O daughter card . . . . . . . . . . . . . . . . 41

OptionsGuide BX630 S2
Contents
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2606-001.fm
8 Replacing the battery . . . . . . . . . . . . . . . . . . . . . . 43
9 Upgrading to a quad-socket server blade . . . . . . . . . . . 45
9.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
9.2 Assembly instructions . . . . . . . . . . . . . . . . . . . . . 47
10 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
10.1 Closing the server blade . . . . . . . . . . . . . . . . . . . . 57
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

BX630 S2 Options Guide 5
1 Preface
The PRIMERGYBX630 S2 scalable server blade is an AMD-based server blade
designed for the PRIMERGY BX600 S3 basic unit. It can also be operated in
slots 1-3 and 5-9 of the BX600 S2 basic unit. The BX630 S2 scalable server
blade can be installed as a dual-socket server blade or, in a multi-blade config-
uration, as a quad-socket server blade.
1.1 Concept and target groups
This Options Guide shows you how to extend and upgrade your server.
VCAUTION!
The activities described in this manual may only be performed by
technical specialists.
IThe installation and removal of the hot-plug components is described in
the Operating Manual supplied with the server.
1.2 Documentation overview
More information on your PRIMERGY BX630 S2 can be found in the following
documents:
– “Quick Start Software - Quick Installation Guide” leaflet (only included as a
printed copy)
– “Safety notes and other important information” manual
– “Warranty” manual
– “Ergonomics” manual
– “Returning used devices” manual
– “Helpdesk” leaflet
– “PRIMERGY BX630 S2 Server Operating Manual”
IPRIMERGY manuals are available in PDF format on the ServerBooks
DVD. The ServerBooks DVD is part of the ServerView Installation
Management Suite supplied with every server.

6 OptionsGuide BX630 S2
Documentation overview Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2607-001.fm
The PDF files of the manuals can also be downloaded free of charge
from the Internet. The overview page showing the online documentation
available on the Internet can be found using the URL:
http://manuals.ts.fujitsu.com. The PRIMERGY server documentation can
be accessed using the Industry standard servers navigation option.
If you need a replacement copy of the ServerBooks DVD, send the
details of your server to the following e-mail address: [e-mail]
Further sources of information:
– Manual for the monitor
– Documentation for boards and drives
– Documentation for your operating system
– Information files on your operating system

BX630 S2 Options Guide 7
Preface Extensions and conversions
1.3 Extensions and conversions
Second processor
If only one processor is installed in your server blade, you can upgrade it to
include a second one. You may only use processors of the same type in the
server blade. The second processor must have the same clock frequency as the
first.
Extending the main memory
The system board of the BX630 S2 scalable server blade has four memory
banks with two 184-pin DDR2 DIMM slots each. This allows a maximum
memory configuration of 32 GB. Each memory bank can be fitted with
512 Mbyte, 1 Gbyte, 2 Gbyte or 4 Gbyte registered DDR2 667 MHz PC2-5300
memory modules.
The two memory modules of one bank must always be fitted in pairs and have
the same capacity.
Optional I/O module
The server blade can be equipped with a 4-Gbit FC I/O module or a 1-Gbit
Ethernet I/O module.
To allow use of the additional I/O functionality, at least one FC pass-thru blade
(or switch blade) or Ethernet LAN pass-thru blade (or switch blade) must be
installed in the NET3 and/or NET4 slots of the PRIMERGY BX600 basic unit.
Multi-blade configuration
You can upgrade the BX630 S2 scalable server blade to a quad-socket server
blade by connecting two dual-socket server blades, see section “Configura-
tions” on page 10.

8 OptionsGuide BX630 S2
Structure of the server blade Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2607-001.fm
1.4 Structure of the server blade
Figure 1: PRIMERGYBX630 S2 scalable server blade
The above figure shows the positions of the most important components of the
PRIMERGYBX630 S2 scalable server blade.
2
1
3
4
6
78
5
10
9

BX630 S2 Options Guide 9
Preface Structure of the server blade
1 CPU 1 and heat sink
2 DIMM slots for four DDR2 667 modules (two banks, assigned to CPU1)
3 Lithium battery
4 DIMM slots for four DDR2 667 modules (two banks, assigned to CPU2)
5 DIP switch SW4 (user switch)
6 Control panel board with connection cable
7 2.5-inch SAS/SATA-II hard disk module 1
8 2.5-inch SAS/SATA-II hard disk module 2
9 CPU 2 and heat sink
10 Position for a 4-Gbit FC daughter card or a 1-Gbit Ethernet daughter
card (optional I/O module)

10 OptionsGuide BX630 S2
Configurations Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2607-001.fm
1.5 Configurations
The PRIMERGY BX630 S2 scalable server blade can be installed as a dual-
socket server blade or as a quad-socket server blade. The possible configura-
tions are shown in the following diagrams.
Dual-socket server blade
Figure 2: PRIMERGY BX630 S2 dual-socket server blade
Processor Hard disksI/O moduleMain memory
Basic configuration
Optional module
Opteron CPU 2 FC or GbE I/O module or
emtpy
SAS/SATA
Bank 4 (2 modules)
Opteron CPU 1
Bank 3 (2 modules)
Bank 2 (2 modules)
Bank 1 (2 modules)
SAS/SATA
onboard
2.5" HDD module
controller
or dummy module
SAS/SATA
2.5" HDD module
or dummy module

BX630 S2 Options Guide 11
Preface Configurations
Quad-socket server blade
The following figure shows the possible configurations of a PRIMERGY
BX630 S2 quad-socket server blade.
Figure 3: PRIMERGY BX630 S2 quad-socket server blade
Processor Hard disksI/O moduleMain memory
Basic configuration
Optional module
Master
Opteron CPU SAS
Bank 1 (2 modules)
Opteron CPU
Bank 2 (2 modules)
Bank 3 (2 modules)
Bank 4 (2 modules)
SAS/SATA
onboard
2.5" HDD module
controller
or dummy module
SAS
2.5" HDD module
or dummy module
FC or GbE
I/O module or
empty
Slave
Opteron CPU SAS
Bank 5 (2 modules)
Opteron CPU
Bank 6 (2 modules)
Bank 7 (2 modules)
Bank 8 (2 modules)
SAS/SATA
onboard
2.5" HDD module
controller
or dummy module
SAS
2.5" HDD module
or dummy module
FC or GbE
I/O module or
empty

12 OptionsGuide BX630 S2
Notational conventions Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2607-001.fm
1.6 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
“Quotation marks” indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.

BX630 S2 Options Guide 13
2Procedure
VCAUTION!
●The actions described in this manual should only be performed by
technical specialists.
●Equipment repairs should only be performed by service staff.
●Any failure to observe the guidelines in this manual, and any unautho-
rized opening or improper repairs could expose the user to risks
(electric shock, energy hazards, fire hazards) or damage the
equipment.
●Please note that any unauthorized opening of the server will void the
warranty and exempt the manufacturer from all liability.
ÊFirst of all please familiarize yourself with the safety instructions in the
chapter “Safety instructions” on page 15.
ÊMake sure that all the manuals you need are available and print out the PDF
files if necessary. You will definitely need the operating manuals of the server
blade and of your BX600 S2 or BX600 S3 basic unit.
ÊShut down the server blade correctly, switch it off and remove it from the
basic unit as described in the Completion.
ÊExtend or upgrade your server blade as described in the relevant chapter.
IThe installation and removal of the hot-plug components is described
in the Operating Manual supplied with the server blade.
ÊClose the server blade, place it back in the basic unit and switch on the
server blade as described in chapter “Completion” on page 57.
ÊStart the operating system and, if necessary, configure it as required (see
the Operating Manual).

© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2608-001.fm

BX630 S2 Options Guide 15
3 Safety instructions
IThe following safety instructions are also provided in the manual “Safety
notes and other important information”.
This device meets the relevant safety regulations for IT equipment. If you have
any questions about whether you can install the server in the intended
environment, please contact your sales outlet or our customer service team.
VCAUTION!
●The actions described in this manual should only be performed by
technical specialists.
●Equipment repairs should only be performed by service staff.
●Any failure to observe the guidelines in this manual, and any unautho-
rized opening or improper repairs could expose the user to risks
(electric shock, energy hazards, fire hazards) or damage the
equipment.
●Please note that any unauthorized opening of the server will void the
warranty and exempt the manufacturer from all liability.
Before starting up
VCAUTION!
●During installation and before operating the device, observe the
instructions on environmental conditions for your device.
●If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the device.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
●Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Installation and Operation
VCAUTION!
●Read the notes on installation and operation in the operating manual
for your BX600 S2 or BX600 S3 basic unit.

16 OptionsGuide BX630 S2
Safety instructions
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2609-001.fm
VCAUTION!
●When installing the server blade in the basic unit, beware of the
energy hazard at the midplane contacts. A short-circuit on these
contacts may damage the system.
●Data cables must be adequately shielded to avoid interference.
●For the LAN wiring, the requirements according to standards EN
50173 and EN 50174-1/2 apply. The minimum requirement is the use
of a protected LAN line of category 5 for 10/100 Mbps Ethernet,
and/or category 5e for Gigabit Ethernet. The requirements of the
specification ISO/IEC 11801 must also be taken into account.
●Route the cables in such a way that they do not form a potential
hazard (tripping) and cannot be damaged. When connecting the
device, refer to the relevant notes in the Operating Manual.
●Do not connect or disconnect any data transmission cables during a
thunderstorm (lightning hazard).
●Be careful to ensure that no objects (e.g. jewelry, paper clips etc.) or
liquids get inside the device (electric shock, short circuit).
●In emergencies (e.g. damaged casing, control elements or cables,
penetration of liquids or foreign bodies), switch off the device immedi-
ately, unplug it from the grounded power outlets, and contact your
customer service center.
●Proper operation of the device (in accordance with IEC60950/EN
60950) is only ensured if the casing is completely assembled and the
rear covers for the installation openings are in place (electric shock,
cooling, fire protection, interference suppression).
●Install only system extensions that satisfy the requirements and rules
governing safety, electromagnetic compatibility, and telecommunica-
tions terminal equipment.
If you install other extensions, you may damage the system or violate
these safety regulations.
Information on which system extensions are suitable can be obtained
from the customer service center or your sales outlet.

BX630 S2 Options Guide 17
Safety instructions
VCAUTION!
●The components marked with a warning label (e.g. lightning symbol)
may only be opened, removed, or exchanged by authorized, qualified
personnel, with the exception of the hot-plug/hot-swap components.
●If you cause a defect on the device by installing or exchanging system
extensions, the warranty will be invalidated.
●Only set the resolutions and refresh rates specified in the operating
manual for your monitor.
Otherwise, you may damage the monitor. If you are in any doubt,
contact your sales outlet or customer service center.
Batteries
VCAUTION!
●Incorrect replacement of batteries can lead to risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer (see Options Guide).
●Do not throw batteries into the trash can. They must be disposed of
in accordance with local regulations on special waste.
●The German battery act obligates consumers in Germany to return
waste batteries to the distributor or to the return points established by
the public waste management authorities.
●Replace the lithium battery on the system board only as described in
the Options Guide.
●All batteries containing pollutants are marked with a crossed-out
garbage can accompanied by the chemical symbol of the heavy
metal that classifies the battery as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead

18 OptionsGuide BX630 S2
Safety instructions
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2609-001.fm
Modules with electrostatic-sensitive components
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 4: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
●Remove the power plug before installing or removing components
containing ESDs.
●You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
●The equipment and tools you use must be free of static charges.
●Only touch the components at the positions highlighted in green (touch
points).
●Do not touch any exposed pins or conductors on a component.
●Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
●Place all components on a static-safe base.
IYou will find a detailed description for handling ESD components in the
relevant European or international standards (DIN EN 61340-5-1,
ANSI/ESD S20.20).

BX630 S2 Options Guide 19
4 Preparation
VCAUTION!
Please observe the safety information in the chapter “Safety instructions”
on page 15.
ÊExit all applications and shut down the server blade correctly.
ÊPress the On/Off button on the server blade control panel.
Removing the server blade from the basic unit
Figure 5: Disengaging the server blade
ÊPress the two touch points (1) to unlock
the handles.
ÊOpen out the two handles (2) simulta-
neously to disengage the server blade.
1
2
2
1

20 OptionsGuide BX630 S2
Preparation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_og\bx630s2-og-en\OBJ_DOKU-2610-001.fm
Figure 6: Removing the server blade from the basic unit
ÊPull the server blade out of the
basic unit.