Fujitsu BX630 - PRIMERGY - S2 Dual User manual

PRIMERGY BX630 S2
Scalable Server Blade
Operating Manual
Edition October 2008

Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected]ujitsu.com.
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2533-002.fm
Copyright © 2009 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.

BX630 S2 Operating Manual
Contents
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Concept and target group of this manual . . . . . . . . . . . . 6
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 7
1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 12
1.5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 13
2 Overview: Installation Procedure . . . . . . . . . . . . . . . 15
3 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1 Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.3 Environmental protection . . . . . . . . . . . . . . . . . . . 20
4 Installing the Hardware . . . . . . . . . . . . . . . . . . . . 23
4.1 Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . 23
4.2 Unpacking the Server Blade . . . . . . . . . . . . . . . . . . 23
4.3 Installing the Server Blade in the Basic Unit . . . . . . . . . 24
4.4 Connecting Devices . . . . . . . . . . . . . . . . . . . . . . 28
5 Installation and Operation . . . . . . . . . . . . . . . . . . . 31
5.1 Control and Connection Panel . . . . . . . . . . . . . . . . 32
5.2 Switching the Server Blade On/Off . . . . . . . . . . . . . . 35
5.3 Configuring the Server Blade . . . . . . . . . . . . . . . . . 35
5.4 Updating the Firmware (BIOS and BMC) . . . . . . . . . . . 38

Operating Manual BX630 S2
Contents
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2537-002.fm
6 BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
6.1 Entering the BIOS Setup . . . . . . . . . . . . . . . . . . . . 43
6.2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.3 Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
6.4 Advanced menu . . . . . . . . . . . . . . . . . . . . . . . . . 48
6.4.1 Peripheral Configuration . . . . . . . . . . . . . . . . . . . . . 50
6.4.2 Advanced System Configuration . . . . . . . . . . . . . . . . . 53
6.4.3 Power On/Off menu . . . . . . . . . . . . . . . . . . . . . . . . 54
6.4.4 IPMI menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
6.4.4.1 IPMI LAN parameters . . . . . . . . . . . . . . . . . . . . . 59
6.5 Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . 60
6.6 Server menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.6.1 CPU Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.6.2 Memory Status . . . . . . . . . . . . . . . . . . . . . . . . . . 67
6.6.3 Console Redirection . . . . . . . . . . . . . . . . . . . . . . . 69
6.7 Boot menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.8 Exit menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
7 Troubleshooting and Tips . . . . . . . . . . . . . . . . . . . . 73
8 Hot-plug components . . . . . . . . . . . . . . . . . . . . . . 75
8.1 Hot-plug disk drives . . . . . . . . . . . . . . . . . . . . . . . 75
8.2 Handling hard disk drives and HDD modules . . . . . . . . . 77
8.3 Installing/removing the dummy module . . . . . . . . . . . . 78
8.4 Installing/removing a hard disk module . . . . . . . . . . . . 79
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

BX630 S2 Operating Manual 5
1 Preface
The PRIMERGY BX630 S2 server blade is a scalable AMD-based dual-socket
server blade. It offers several new forward-looking technologies such as quad-
core processors, 2.5-inch SAS or SATA-II hard disk drives, four 1-Gbit/s
onboard Ethernet LAN channels and an optional dual-channel 4-Gbit/s Fibre
Channel (FC) connection. Two BX630 S2 dual-socket server blades can be
connected to form a quad-socket server blade with 16 processor cores.
Figure 1: PRIMERGY BX630 S2 configurations
The PRIMERGY BX630 S2 scalable server blade is designed for the BX600 S3
basic unit, but it can also be installed in slots 1-3 and 5-9 of the BX600 S2 basic
unit.
IIn the latter case, however, only 2 of the 4 onboard Ethernet channels of
the BX630 S2 server blade can be used.
Security functions in the BIOS Setup protect the data on the server blade from
unauthorized manipulation.
Dual-socket server blade Quad-socket server blade

6 Operating Manual BX630 S2
Concept and target group of this manual Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2504-002.fm
Depending on the configuration, the PRIMERGY BX630 S2 scalable server
blade occupies one or two slots in the PRIMERGY BX600 S2 or the BX600 S3
basic unit.
1.1 Concept and target group of this manual
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the infor-
mation you need to put your PRIMERGY BX630 S2 server blade into operation.
The information in this manual refers to the BX630 S2 dual-socket server blade.
How to connect two BX630 S2 dual-socket server blades to form a quad-socket
server blade is described in the Options Guide.
For a brief overview of the installation steps see chapter 2 on page 15ff.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.

BX630 S2 Operating Manual 7
Preface Documentation overview
1.2 Documentation overview
Information on your PRIMERGY BX630 S2 is provided in the following
documents:
– Flyer "Quick Start Software - Quick Installation Guide" (only provided as
hard copy)
– Manual "Safety Notes and other Important Information"
– Manual "Guarantee"
– Manual "Ergonomics"
– Manual "Returning used devices"
– Flyer "Helpdesk"
– Operating Manual for PRIMERGY BX630 S2 Scalable Server Blade
– Options Guide for PRIMERGY BX630 S2 Scalable Server Blade
IPRIMERGY manuals are available in PDF format on the ServerBooks
DVD. The ServerBooks DVD is part of the ServerView Installation
Manager Suite supplied with every server.
The PDF files of the manuals can also be downloaded free of charge
from the Internet. The overview page showing the online documentation
available on the Internet can be found using the URL:
http://manuals.ts.fujitsu.com. The PRIMERGY server documentation can
be accessed using the Industry standard servers navigation option.
If you need a replacement copy of the ServerBooks DVD, send the
details of your server to the following e-mail address: [email protected]jitsu.com.
Further sources of information:
– Manual for the monitor
– Documentation for boards and drives
– Documentation for your operating system
– Information files on your operating system
IFor information on installing and operating PRIMERGY BX6xx server
blades that applies to all server blade models, see the operating manual
for your PRIMERGY BX600 S2 or BX600 S3 basic unit.

8 Operating Manual BX630 S2
Features Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2504-002.fm
1.3 Features
Processors
In the BX630 S2 dual-socket server blade, one (basic configuration) or two
AMD Opteron quad-core processors of the 23xx DP and 83xx MP series ensure
extremely high data throughput and system performance.
All processors have a 2-MB second-level cache (SLC).
IIt is not possible to use CPUs with different clock rates or cache capacity
in a server blade.
In the BX630 S2 quad-socket server blade, only processors of the
Opteron 83xx MP series are allowed.
For upgrading processors see the Options Guide; for exchanging processors
see the Service Supplement.
Memory
The BX630 S2 dual-socket server blade has eight memory slots. Each
processor is assigned four memory slots. Two memory slots make up one
memory bank. The memory slots must be fitted by bank, i.e. with pairs of
memory modules. The server blade supports memory modules of the type
DDR2 667 with 512 MB, 1 GB, 2 GB or 4 GB capacity, so the maximum config-
uration is 32 GB (64 GB in a quad-socket server blade). ECC with memory
scrubbing and ChipKill™ are supported. Only memory modules of the same
capacity can be installed in the same memory bank.
How to install memory modules is described in the Options Guide.
LAN availability
The BX630 S2 dual-socket server blade has two onboard Ethernet LAN
controllers with two 1-Gbit/s Ethernet channels each. The Ethernet LAN
connection can be implemented via switch blades or via pass-thru blades on the
back of the basic unit. For more information see the operating manual for the
basic unit.
IYou can only use the two 1-Gbit/s Ethernet channels of the second
onboard LAN controller in connection with the BX600 S3 basic unit and
the Gbit Ethernet LAN switch blade (SB9f) 12 x 1 Gbit.

BX630 S2 Operating Manual 9
Preface Features
Graphics controller
The PRIMERGY BX630 S2 scalable server blade has an onboard graphics
controller (Matrox MGA-200) which is integrated in the iRMC controller. You can
connect a monitor via the VGA interface (via breakout cable) on the front of the
server blade or via the KVM blade on the back of the basic unit.
Optional Fibre Channel or Ethernet I/O module (daughter card)
You can fit the BX630 S2 dual-socket server blade with an I/O daughter card to
connect to a SAN or for additional Ethernet connections. The BX630 S2 quad-
socket server blade allows two I/O daughter cards to be installed.
To be able to use the additional I/O functionality, at least one FC pass-thru blade
or switch blade, or Ethernet pass-thru blade or switch blade must be installed in
slot NET3 of the basic unit.
The following I/O daughter cards are available:
– 4-Gbit/s Fibre Channel I/O module (PCIe), allows transfer rates of 1, 2 or 4
Gbit/s and supports multiple Fibre Channel storage subsystems with the
corresponding versions.
IYou can operate the 4-Gbit/s Fibre Channel I/O module only with a
BX600 S3 basic unit and only in combination with a Brocade SW-
4016 D4 Fibre Channel switch blade or with a 4 Gbit FC pass-thru
blade. For more information see the operating manual for the
BX600 S3 basic unit.
– Gigabit Ethernet I/O module (PCIe), also supports TOE (TCP/IP offload
engine) and iSCSI
– 10-Gbit Ethernet I/O module (PCIe)
IThe 10-Gbit Ethernet I/O module (PCIe) can only be used in combi-
nation with a 10-Gbit switch blade 10/2. For more information see the
operating manual for the basic unit.
IYou must not install server blades with different I/O modules in the same
BX600 S2 or BX600 S3 basic unit.
How to install I/O modules later is described in the Options Guide.

10 Operating Manual BX630 S2
Features Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2504-002.fm
High availability and reliability
When memory data is accessed, 1-bit errors in the main memory are recog-
nized and automatically corrected with the ECC (Error Correcting Code)
method.
ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in
the event of an error and automatically "hides" the defective system compo-
nents.
The PDA (Prefailure Detection and Analyzing) technology from Fujitsu
Technology Solutions analyzes and monitors all components that are important
for system reliability.
The onboard SAS RAID controller supports RAID levels 0 and 1 by default, thus
increasing the system's availability. If you are using SATA-II hard disk drives, you
can implement RAID levels 0 and 1 using Promise 20319 to increase the
system's availability.
Server management
Server management is implemented using the supplied ServerView software and
PDA technology. PDA reports the threat of a system error or overloading to the
system administrator in good time, so that preventive measures can be taken.
ServerView allows the management of all PRIMERGY servers in the network via
a central console. ServerView supports the following functions:
●Monitoring of the ambient and CPU temperatures
●Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
if memory modules or processors fail
●Power monitoring
●End-of-life monitoring of the fans with prefailure notification
●Watchdog timer for monitoring the operating system and applications with
ASR&R
The supplied deployment software simplifies and speeds up the installation of
multiple servers. For further information see the relevant documentation.
For further information on the ServerView server management software see the
relevant documentation.

BX630 S2 Operating Manual 11
Preface Features
ServerView Installation Manager
The enclosed ServerView Installation Manager software allows you to configure
your server system quickly according to your requirements. User-friendly
menus guide you through the installation of the server operating systems.
Service and support
PRIMERGY servers have a service-friendly, modular architecture, thus
enabling quick and simple maintenance. The flash-EPROM program supplied
with the utilities from Fujitsu Technology Solutions allows fast BIOS updating via
the USB interface.
The two redundant hot-pluggable management blades of the PRIMERGY
BX600 S2 and BX600 S3 basic unit with independent LAN and COM ports for
administration allow complete remote administration of the server blade.
Together they allow remote diagnosis for system analysis, remote configuration
and a remote restart even in the event of an operating system failure or
hardware errors.

12 Operating Manual BX630 S2
Notational conventions Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2504-002.fm
1.4 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
“Quotation marks” indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.

BX630 S2 Operating Manual 13
Preface Technical data
1.5 Technical data
Electrical specifications
Compliance with regulations and standards
Certification
Power consumption ~ 380 W (full configuration)
Thermal dissipation min. ~ 750 kJ/h,
max. ~ 1000 kJ/h
Product safety and
ergonomics
IEC 60950-1 / EN 60950-1, UL/CSA 60950-1,
CNS 14336 / GB 4943 / EN 50371
Electromagnetic
compatibility
FCC class A
CNS 13438 class A; VCCI class A
AS/NZS CISPR 22 class A / GB 9254 class A
GB 17625
Interference emissions EN 55022 class A
Harmonic current EN 61000-3-2
Flicker EN 61000-3-3
Interference immunity EN 55024, EN 300386
CE marking
to EU directives
Low Voltage Directive 2006/95/EC
(Product Safety)
Electromagnetic Compatibility 2004/108/EC
Product safety
Global CB
Europe ENEC
Germany GS, CE
USA/Canada CSAUS / CSAC
Japan VCCI
China/Taiwan BSMI

14 Operating Manual BX630 S2
Technical data Preface
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2504-002.fm
Mechanical specifications
Weight
Max. 6 kg (quad-socket server blade: 12 kg).
Ambient conditions
Condensation during operation must be avoided!
Width 286 mm
Depth 470 mm (520 mm incl. handles and plugs)
Height 43 mm (quad-socket server blade: 86 mm;
1 or 2 slots in the basic unit)
Environment class 3K2
Environment class 2K2
EN 60721 / IEC 721 Part 3-3
EN 60721 / IEC 721 Part 3-2
Temperature:
Operation (3K2) 5 °C .... 35 °C
Transport (2K2) -20 °C .... 60 °C
Humidity 10%...85%

BX630 S2 Operating Manual 15
2 Overview: Installation Procedure
This chapter provides an overview of the steps you must perform to install your
PRIMERGY BX630 S2 scalable server blade in your basic unit. The links take
you to the sections with more detailed descriptions of the individual steps.
ÊFirst read the chapter “Important notes” starting on page 17, in particular the
section “Notes on safety”.
ÊUnpack the server blade, check the delivery for damage sustained during
transport and that the delivery corresponds to the specifications in the
delivery note (see section 4.2 on page 23).
ÊMount the server blade into your BX600 S2 or BX600 S3 basic unit (see
section 4.3 on page 24).
ÊFamiliarize yourself with the control and display elements on the front of the
server blade (see chapter “Installation and Operation” on page 31).
ÊInstall the operating system and the applications on the server blade.
To do this, you have the following options:
–Cloning the server blade from a remote image server using RemoteDeploy.
This is recommended if the following are available:
– the RemoteDeploy software
– a suitable clone image
– a deployment server and a LAN connection
–Remote installation with ServerView Installation Manager
This installation method is recommended if a LAN connection and a
DHCP server (deployment server) are available but the requirements for
cloning are not met.

16 Operating Manual BX630 S2
Overview: Installation Procedure
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2505-002.fm
–Local installation with or without ServerView Installation Manager
The local installation is the least convenient method. It is only recom-
mended if the requirements for a remote installation or cloning are not
met.
If you want to use an operating system that is not supported by
ServerView Installation Manager, you can of course install it directly without
ServerView Installation Manager.
IFor more information on the remote or local installation of server
blades see the ServerView Installation Manager manual, which contains
a Quick Step Guide and a detailed description of the individual instal-
lation options and wizards. A PDF version of the ServerView
Installation Manager manual is available on the PRIMERGY
ServerBooks DVD.
For how to clone server blades see the RemoteDeploy manual (a
PDF file is available on the PRIMERGY ServerBooks DVD).
For information on installing and operating the PRIMERGY BX600 S2 or
BX600 S3 basic unit, see the operating manual of your basic unit.

BX630 S2 Operating Manual 17
3 Important notes
This chapter provides safety instructions which you must observe when
handling your server blade.
3.1 Notes on safety
IThe following safety instructions are also provided in the manual “Safety
notes and other important information”.
This device complies with the relevant safety regulations for IT equipment,
including electronic office machines for use in an office environment.
If you have any questions, please contact your sales outlet or the Fujitsu
Technology Solutions customer service center.
VCAUTION!
The activities described in this manual should only be performed by
engineers, service personnel or technical specialists. Equipment repairs
should only be performed by qualified staff! Any failure to observe the
guidelines in this manual could endanger the user (through electric
shock, fire hazards) or damage the equipment. Please note that any
unauthorized opening of the device will result in the invalidation of the
warranty and exclusion from all liability.
Before setting up
VCAUTION!
●During installation and before operating the device, please read the
instructions on environmental conditions for your device (see section
“Technical data” on page 13).
●If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the machine.
Before operating the device, wait until it is absolutely dry and has
reached approximately the same temperature as the installation site.
Failure to observe these guidelines can lead to material damage of
the device.

18 Operating Manual BX630 S2
Notes on safety Important notes
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2506-002.fm
VCAUTION!
●Transport the device only in its original packaging or in packaging
which protects it from knocks and jolts.
Installation and operation
VCAUTION!
●Read the notes on installation and operation in the operating manual
for your BX600 S2 or BX600 S3 basic unit.
Batteries
VCAUTION!
●Incorrect replacement of batteries can lead to risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer (see Options Guide).
●Do not throw batteries into the trash can. They must be disposed of
in accordance with local regulations on special waste.
●The German battery act obligates consumers in Germany to return
waste batteries to the distributor or to the return points established by
the public waste management authorities.
●Replace the lithium battery on the system board only as described in
the Options Guide.
●All batteries containing pollutants are marked with a crossed-out
garbage can accompanied by the chemical symbol of the heavy
metal that classifies the battery as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead
Please note the following:
●If you pass the system on to someone else, you should also give them the
corresponding documentation.

BX630 S2 Operating Manual 19
Important notes Notes on safety
Modules with Electrostatic-Sensitive Devices
Modules with electrostatic-sensitive devices are identified by the following
sticker:
Figure 2: ESD label
When you handle components fitted with ESDs, you must always observe the
following points:
●Switch off the system and remove the power plugs from the power outlets
before installing or removing components with ESDs.
●You must always discharge static build-up (e.g. by touching a grounded
object) before working with such components.
●Any devices or tools that are used must be free of electrostatic charge.
●Wear a suitable grounding cable that connects you to the external chassis of
the system unit.
●Always hold components with ESDs at the edges or at the points marked
green (touch points).
●Do not touch any connectors or conduction paths on an ESD.
●Place all the components on a pad which is free of electrostatic charge.
IFor a detailed description of how to handle ESD components, see the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).

20 Operating Manual BX630 S2
CE conformity Important notes
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx630_s2_ba\Archiv\bx630s2-ba-en\OBJ_DOKU-2506-002.fm
3.2 CE conformity
3.3 Environmental protection
Environmentally-friendly product design and development
This product has been designed in accordance with the Fujitsu Technology
Solutions standard for “environmentally friendly product design and devel-
opment”. This means that key factors such as durability, selection and labeling
of materials, emissions, packaging, ease of dismantling and recycling have
been taken into account.
This saves resources and thus reduces the harm done to the environment.
Energy-saving information
Devices that do not need to be constantly switched on should be switched off
until they are needed as well as during long breaks and after completion of work.
Packaging information
Do not throw away the packaging. You may need it later for transporting the
system. If possible, the equipment should only be transported in its original
packaging.
Information on handling consumables
Please dispose of printer consumables and batteries in accordance with the
applicable national regulations.
In accordance with EU directives, batteries must not be disposed of with
unsorted domestic waste. They can be returned free of charge to the manufac-
turer, dealer or an authorized agent for recycling or disposal.
All batteries containing pollutants are marked with a symbol (a crossed-out
garbage can). They are also marked with the chemical symbol for the heavy
metal that causes them to be categorized as containing pollutants:
The system complies with the requirements of the EC directives
2004/108/EC regarding “Electromagnetic Compatibility” and
2006/95/EC “Low Voltage Directive”. This is indicated by the CE
marking (CE = Communauté Européenne).