Fujitsu M10 series Service manual

Fujitsu M10/SPARC M10 Systems

Product Notes for XCP Version 2240

Manual Code: C120-0012-02EN

March 2015

Copyright

©

2007,

2015,

Fujitsu

Limited.

All

rig

h

ts

reserved.

Ora le

and/or

its

affiliates

provided

te hni al

input

and

review

on

portions

of

this

material.

Ora le

and/or

its

affiliates

and

Fujitsu

Limited

ea h

own

or

ontrol

intelle tual

property

rights

relating

to

produ ts

and

te hnology

des ribed

in

this

do ument,

and

su h

produ ts,

te hnology

and

this

do ument

are

prote ted

by

opyright

laws,

patents,

and

other

intelle tual

property

laws

and

international

treaties.

This

do ument

and

the

produ t

and

te hnology

to

whi h

it

pertains

are

distributed

under

li enses

restri ting

their

use,

opying,

distribution,

and

de ompilation.

No

part

of

su h

produ t

or

te hnology,

or

of

this

do ument,

may

be

reprodu ed

in

any

form

by

any

means

without

prior

written

authorization

of

Ora le

and/or

its

affiliates

and

Fujitsu

Limited,

and

their

appli able

li ensors,

if

any.

The

furnishings

of

this

do ument

to

you

does

not

give

you

any

rights

or

li enses,

express

or

implied,

with

respe t

to

the

produ t

or

te hnology

to

whi h

it

pertains,

and

this

do ument

does

not

ontain

or

represent

any

ommitment

of

any

kind

on

the

part

of

Ora le

or

Fujitsu

Limited

or

any

affiliate

of

either

of

them.

This

do ument

and

the

produ t

and

te hnology

des ribed

in

this

do ument

may

in orporate

third-party

intelle tual

property

opyrighted

by

and/or

li ensed

from

the

suppliers

to

Ora le

and/or

its

affiliates

and

Fujitsu

Limited,

in luding

software

and

font

te hnology.

Per

the

terms

of

the

GPL

or

LGPL,

a

opy

of

the

sour e

ode

governed

by

the

GPL

or

LGPL,

as

appli able,

is

available

upon

request

by

the

End

User.

Please

onta t

Ora le

and/or

its

affiliates

or

Fujitsu

Limited.

This

distribution

may

in lude

materials

developed

by

third

parties.

Parts

of

the

produ t

may

be

derived

from

Berkeley

BSD

systems,

li ensed

from

the

University

of

California.

UNIX

is

a

registered

trademark

of

The

Open

Group.

Ora le

and

Java

are

registered

trademarks

of

Ora le

and/or

its

affiliates.

Fujitsu

and

the

Fujitsu

logo

are

registered

trademarks

of

Fujitsu

Limited.

SPARC

Enterprise,

SPARC64,

SPARC64

logo

and

all

SPARC

trademarks

are

trademarks

or

registered

trademarks

of

SPARC

International,

In .

in

the

United

States

and

other

ountries

and

used

under

li ense.

Other

names

may

be

trademarks

of

their

respe tive

owners.

If

this

is

software

or

that

is

delivered

to

the

U.S.

Government

or

anyone

li ensing

it

on

behalf

of

the

U.S.

Government,

the

following

noti e

is

appli able:

U.S.

GOVERNMENT

END

USERS:

Ora le

programs,

in luding

any

operating

system,

integrated

software,

any

programs

installed

on

the

hardware,

and/or

do umentation,

delivered

to

U.S.

Government

end

users

are

" ommer ial

omputer

software"

pursuant

to

the

appli able

Federal

A quisition

Regulation

and

agen y-spe ifi

supplemental

regulations.

As

su h,

use,

dupli ation,

dis losure,

modifi ation,

and

adaptation

of

the

programs,

in luding

any

operating

system,

integrated

software,

any

programs

installed

on

the

hardware,

and/or

do umentation,

shall

be

subje t

to

li ense

terms

and

li ense

restri tions

appli able

to

the

programs.

No

other

rights

are

granted

to

the

U.S.

Government.

Dis laimer:

The

only

warranties

granted

by

Ora le

and

Fujitsu

Limited,

and/or

any

affiliate

in

onne tion

with

this

do ument

or

any

produ t

or

te hnology

des ribed

herein

are

those

expressly

set

forth

in

the

li ense

agreement

pursuant

to

whi h

the

produ t

or

te hnology

is

provided.

EXCEPT

AS

EXPRESSLY

SET

FORTH

IN

SUCH

AGREEMENT,

ORACLE

OR

FUJITSU

LIMITED,

AND/OR

THEIR

AFFILIATES

MAKE

NO

REPRESENTATIONS

OR

WARRANTIE

S

OF

ANY

KIND

(EXPRESS

OR

IMPLIED)

REGARDING

SUCH

PRODUCT

OR

TECHNOLOGY

OR

THIS

DOCUMENT,

WHICH

ARE

ALL

PROVIDED

AS

IS,

AND

ALL

EXPRESS

OR

IMPLIED

CONDITIONS,

REPRESENTATIONS

AND

WARRANTIES,

INCLUDING

WITHOUT

LIMITATION

ANY

IMPLIED

WARRANTY

OF

MERCHANTABILITY,

FITNESS

FOR

A

PARTICULAR

PURPOSE

OR

NONINFRINGEMENT,

ARE

DISCLAIMED,

EXCEPT

TO

THE

EXTENT

THAT

SUCH

DISCLAIMERS

ARE

HELD

TO

BE

LEGALLY

INVALID.

Unless

otherwise

expressly

set

forth

in

su h

agreement,

to

the

extent

allowed

by

appli able

law,

in

no

event

shall

Ora le

or

Fujitsu

Limited,

and/or

any

of

their

affiliates

have

any

liability

to

any

third

party

under

any

legal

theory

for

any

loss

of

revenues

or

profits,

loss

of

use

or

data,

or

business

interruptions,

or

for

any

indire t,

spe ial,

in idental

or

onsequential

damages,

even

if

advised

of

the

possibility

of

su h

damages.

DOCUMENTATION

IS

PROVIDED

"AS

IS"

AND

ALL

EXPRESS

OR

IMPLIED

CONDITIONS,

REPRESENTATIONS

AND

WARRANTIES,

INCLUDING

ANY

IMPLIED

WARRANTY

OF

MERCHANTABILITY,

FITNESS

FOR

A

PARTICULAR

PURPOSE

OR

NON-INFRINGEMENT,

ARE

DISCLAIMED,

EXCEPT

TO

THE

EXTENT

THAT

SUCH

DISCLAIMERS

ARE

HELD

TO

BE

LEGALLY

INVALID.

Copyright

©

2007,

2015,

Fujitsu

Limited.

Tous

droits

réservés.

Ora le

et/ou

ses

affiliés

ont

fourni

et

vérifié

des

données

te hniques

de

ertaines

parties

de

e

omposant.

Ora le

et/ou

ses

affiliés

et

Fujitsu

Limited

détiennent

et

ontrôlent

ha un

des

droits

de

propriété

intelle tuelle

relatifs

aux

produits

et

te hnologies

dé rits

dans

e

do ument.

De

même,

es

produits,

te hnologies

et

e

do ument

sont

protégés

par

des

lois

sur

le

droit

d’auteur,

des

brevets,

et

d'autres

lois

sur

la

propriété

intelle tuelle

et

des

traités

internationaux.

Ce

do ument,

le

produit

et

les

te hnologies

afférents

sont

ex lusivement

distribués

ave

des

li en es

qui

en

restreignent

l'utilisation,

la

opie,

la

distribution

et

la

dé ompilation.

Au une

partie

de

e

produit,

de

es

te hnologies

ou

de

e

do ument

ne

peut

être

reproduite

sous

quelque

forme

que

e

soit,

par

quelque

moyen

que

e

soit,

sans

l'autorisation

é rite

préalable

d'Ora le

et/ou

ses

affiliés

et

de

Fujitsu

Limited,

et

de

leurs

éventuels

on édants

de

li en e.

Ce

do ument,

bien

qu'il

vous

ait

été

fourni,

ne

vous

onfère

au un

droit

et

au une

li en e,

exprès

ou

ta ites,

on ernant

le

produit

ou

la

te hnologie

auxquels

il

se

rapporte.

Par

ailleurs,

il

ne

ontient

ni

ne

représente

au un

engagement,

de

quelque

type

que

e

soit,

de

la

part

d'Ora le

ou

de

Fujitsu

Limited,

ou

des

so iétés

affiliées

de

l'une

ou

l'autre

entité.

Ce

do ument,

ainsi

que

les

produits

et

te hnologies

qu'il

dé rit,

peuvent

in lure

des

droits

de

propriété

intelle tuelle

de

parties

tier es

protégés

par

le

droit

d’auteur

et/ou

édés

sous

li en e

par

des

fournisseurs

à

Ora le

et/ou

ses

so iétés

affiliées

et

Fujitsu

Limited,

y

ompris

des

logi iels

et

des

te hnologies

relatives

aux

poli es

de

ara tères.

Conformément

aux

onditions

de

la

li en e

GPL

ou

LGPL,

une

opie

du

ode

sour e

régi

par

la

li en e

GPL

ou

LGPL,

selon

le

as,

est

disponible

sur

demande

par

l'Utilisateur

Final.

Veuillez

onta ter

Ora le

et/ou

ses

affiliés

ou

Fujitsu

Limited.

Cette

distribution

peut

omprendre

des

omposants

développés

par

des

parties

tier es.

Des

parties

de

e

produit

pourront

être

dérivées

des

systèmes

Berkeley

BSD

li en iés

par

l'Université

de

Californie.

UNIX

est

une

marque

déposée

de

The

OpenGroup.

Ora le

et

Java

sont

des

marques

déposées

d'Ora le

Corporation

et/ou

de

ses

affiliés.

Fujitsu

et

le

logo

Fujitsu

sont

des

marques

déposées

de

Fujitsu

Limited.

SPARC

Enterprise,

SPARC64,

le

logo

SPARC64

et

toutes

les

marques

SPARC

sont

utilisées

sous

li en e

et

sont

des

marques

déposées

de

SPARC

International,

In .,

aux

Etats-Unis

et

dans

d'autres

pays.

Tout

autre

nom

mentionné

peut

orrespondre

à

des

marques

appartenant

à

leurs

propriétaires

respe tifs.

Si

e

logi iel,

ou

la

do umentation

qui

l'a ompagne,

est

on édé

sous

li en e

au

Gouvernement

des

Etats-Unis,

ou

à

toute

entité

qui

délivre

la

li en e

de

e

logi iel

ou

l'utilise

pour

le

ompte

du

Gouvernement

des

Etats-Unis,

la

noti e

suivante

s'applique

:

U.S.

GOVERNMENT

END

USERS:

Ora le

programs,

in luding

any

operating

system,

integrated

software,

any

programs

installed

on

the

hardware,

and/or

do umentation,

delivered

to

U.S.

Government

end

users

are

" ommer ial

omputer

software"

pursuant

to

the

appli able

Federal

A quisition

Regulation

and

agen y-spe ifi

supplemental

regulations.

As

su h,

use,

dupli ation,

dis losure,

modifi ation,

and

adaptation

of

the

programs,

in luding

any

operating

system,

integrated

software,

any

programs

installed

on

the

hardware,

and/or

do umentation,

shall

be

subje t

to

li ense

terms

and

li ense

restri tions

appli able

to

the

programs.

No

other

rights

are

granted

to

the

U.S.

Government.

Avis

de

non-responsabilité

:

les

seules

garanties

o troyées

par

Ora le

et

Fujitsu

Limited

et/ou

toute

so iété

affiliée

de

l'une

ou

l'autre

entité

en

rapport

ave

e

do ument

ou

tout

produit

ou

toute

te hnologie

dé rits

dans

les

présentes

orrespondent

aux

garanties

expressément

stipulées

dans

le

ontrat

de

li en e

régissant

le

produit

ou

la

te hnologie

fournis.

SAUF

MENTION

CONTRAIRE

EXPRESSEMENT

STIPULEE

AU

DIT

CONTRAT,

ORACLE

OU

FUJITSU

LIMITED

ET/OU

LES

SOCIETES

AFFILIEES

A

L'UNE

OU

L'AUTRE

ENTITE

DECLINENT

TOUT

ENGAGEMENT

OU

GARANTIE,

QUELLE

QU'EN

SOIT

LA

NATURE

(EXPRESSE

OU

IMPLICITE)

CONCERNANT

CE

PRODUIT,

CETTE

TECHNOLOGIE

OU

CE

DOCUMENT,

LESQUELS

SONT

FOURNIS

EN

L'ETAT.

EN

OUTRE,

TOUTES

LES

CONDITIONS,

DECLARATIONS

ET

GARANTIES

EXPRESSES

OU

TACITES,

Y

COMPRIS

NOTAMMENT

TOUTE

GARANTIE

IMPLICITE

RELATIVE

A

LA

QUALITE

MARCHANDE,

A

L'APTITUDE

A

UNE

UTILISATION

PARTICULIERE

OU

A

L'ABSENCE

DE

CONTREFACON,

SONT

EXCLUES,

DANS

LA

MESURE

AUTORISEE

PAR

LA

LOI

APPLICABLE.

Sauf

mention

ontraire

expressément

stipulée

dans

e

ontrat,

dans

la

mesure

autorisée

par

la

loi

appli able,

en

au un

as

Ora le

ou

Fujitsu

Limited

et/ou

l'une

ou

l'autre

de

leurs

so iétés

affiliées

ne

sauraient

être

tenues

responsables

envers

une

quel onque

partie

tier e,

sous

quelque

théorie

juridique

que

e

soit,

de

tout

manque

à

gagner

ou

de

perte

de

profit,

de

problèmes

d'utilisation

ou

de

perte

de

données,

ou

d'interruptions

d'a tivités,

ou

de

tout

dommage

indire t,

spé ial,

se ondaire

ou

onsé utif,

même

si

es

entités

ont

été

préalablement

informées

d'une

telle

éventualité.

LA

DOCUMENTATION

EST

FOURNIE

"EN

L'ETAT"

ET

TOUTE

AUTRE

CONDITION,

DECLARATION

ET

GARANTIE,

EXPRESSE

OU

TACITE,

EST

FORMELLEMENT

EXCLUE,

DANS

LA

MESURE

AUTORISEE

PAR

LA

LOI

EN

VIGUEUR,

Y

COMPRIS

NOTAMMENT

TOUTE

GARANTIE

IMPLICITE

RELATIVE

A

LA

QUALITE

MARCHANDE,

A

L'APTITUDE

A

UNE

UTILISATION

PARTICULIERE OU

A

L'ABSENCE

DE

CONTREFACON.

Contents

Preface　ix

Chapter

1　Software

Requirements　1

XCP/Oracle

Solaris

and

Required

SRU/Patch 　1

Notes

on

using

Oracle

Solaris

10 　4

Notes

when

using

a

version

older

than

Oracle

V

Server

for

SPARC

3.1.0.1 　4

Required

XCP/Oracle

Solaris

and

required

SRU/patch

to

enable

dynamic

reconfiguration

of

physical

partition 　5

Required

XCP/Oracle

Solaris

and

required

SRU/patch

to

enable

dynamic

reconfiguration

of

PCIe

endpoint

device 　5

Software

supporting

Software

on

Chip 　6

How

to

Obtain

XCP

and

Oracle

Solaris

SRU/Patch/Oracle

V

Server

for

SPARC 　7

Web

Browser 　7

Existing

XCP

Firmware

Versions

and

Support

Information 　7

Chapter

2　XCP

2240-Related

Information　11

Latest

Information

on

XCP

2240 　11

Notes

and

Restrictions 　12

Notes

on

Secure

Socket

Layer

(SSL)

3.0 　12

Restrictions

on

audit 　12

Notes

on

dynamic

reconfiguration

of

physical

partitions 　12

iii

Notes

on

mixing

SPARC64

X+

processors

with

SPARC64

X

processors

13

Notes

and

restrictions

on

the

SR-IOV

functions 　13

Notes

on

OpenBoot

PRO 　14

Notes

on

maintenance

for

CPU

memory

units,

motherboard

unit,

XSCF

unit,

PSU

backplane,

or

crossbar

backplane

unit 　15

Notes

on

CPU

Activation 　17

Notes

and

restrictions

on

XSCF

Web 　18

Notes

on

firmware

update 　19

Notes

on

configurations

with

a

PCI

expansion

unit

connected 　21

Notes

on

dual

power

feed

setting 　23

Notes

on

Active

Directory 　23

Notes

on

LDAP

over

SSL 　23

Notes

on

the

logical

domain

time 　24

Notes

on

Timezones 　26

Notes

on

power

supply

interlock

function

(RCIL) 　26

Other

notes

and

restrictions 　27

XCP

2240

Problems

and

Workarounds 　32

Chapter

　Information

on

Software　

Notes

and

Restrictions 　33

Notes

on

support

for

disks

with

an

EFI

(GPT)

label 　33

Notes

on

Oracle

V

Server

for

SPARC 　34

Notes

on

live

migration

of

Oracle

V

Server

for

SPARC 　35

Notes

on

a

case

when

recovery

mode

of

Oracle

V

Server

for

SPARC

is

enabled 　37

Notes

on

a

case

where

openssl

is

used 　38

Notes

on

remote

maintenance

service 　39

Notes

on

SN P 　40

Problems

with

XCP

and

Workarounds 　41

Problems

that

might

occur

with

XCP

2240

and

workarounds 　41

Problems

resolved

in

XCP

2240 　83

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

2015iv

Problems

resolved

in

XCP

2232 　90

Problems

resolved

in

XCP

2231 　90

Problems

resolved

in

XCP

2230 　90

Problems

resolved

in

XCP

2221 　96

Problems

resolved

in

XCP

2220 　96

Problems

resolved

in

XCP

2210 　106

Problems

resolved

in

XCP

2092 　114

Problems

resolved

in

XCP

2091 　115

Problems

resolved

in

XCP

2090 　116

Problems

resolved

in

XCP

2080 　125

Problems

resolved

in

XCP

2070 　128

Problems

resolved

in

XCP

2052 　139

Problems

resolved

in

XCP

2051 　139

Problems

resolved

in

XCP

2050 　140

Problems

resolved

in

versions

prior

to

XCP

2050 　145

Problems

with

Oracle

Solaris

and

Workarounds 　159

Problems

that

might

occur

in

any

versions

of

Oracle

Solaris

and

workarounds 　159

Problems

that

might

occur

with

Oracle

Solaris

11

and

workarounds 　

166

Problems

that

might

occur

with

Oracle

Solaris

10

and

workarounds 　

168

Problems

resolved

in

Oracle

Solaris

11.2 　168

Chapter

4　Information

on

SPARC

M10-1

Hardware　179

Notes

and

Restrictions 　179

Notes

on

using

external

DVD

drive 　179

Notes

on

using

USB

memory 　179

Problems

with

Hardware

and

Workarounds 　180

Chapter

5　Information

on

SPARC

M10-4

Hardware　181

Notes

and

Restrictions 　181

Notes

on

using

external

DVD

drive 　181

Contents v

Notes

on

using

USB

memory 　181

Problems

with

Hardware

and

Workarounds 　182

Chapter

6　Information

on

SPARC

M10-4S

Hardware　18

Notes

and

Restrictions 　183

Notes

on

using

external

DVD

drive 　183

Notes

on

using

USB

memory 　183

Restrictions

on

replacing

crossbar

box 　184

Restrictions

on

adding

expansion

rack

2　185

Problems

with

Hardware

and

Workarounds 　185

Chapter

7　Information

on

PCI

Expansion

Unit

Hardware　187

Direct

I/O

Function

for

the

PCI

Expansion

Unit 　187

Setting/displaying

the

direct

I/O

function 　187

Problems

with

PCI

Expansion

Units

and

Workarounds 　188

Problems

and

their

workarounds

for

all

versions

of

the

PCI

expansion

unit

firmware 　188

Problems

resolved

in

version

1180

of

the

PCI

expansion

unit

firmware

189

Problems

resolved

in

version

1170

of

the

PCI

expansion

unit

firmware

191

Problems

resolved

in

version

1150

of

the

PCI

expansion

unit

firmware

195

Problems

resolved

in

version

1130

of

the

PCI

expansion

unit

firmware

196

Problems

resolved

in

version

1120

of

the

PCI

expansion

unit

firmware

198

Problems

resolved

in

version

1110

of

the

PCI

expansion

unit

firmware

198

Problems

resolved

in

version

1100

of

the

PCI

expansion

unit

firmware

199

Chapter

8　Contents

of

Revision

of

Documentation　201

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

2015vi

Contents

of

Revision

of

Fujitsu

M10/SPARC

M10

Systems

Safety

and

Compliance

Guide 　201

PSU

Detail

Information

of

ErP

directive

Lot

3　202

Contents vii

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

2015viii

Note

-

If

a

newer

version

of

XCP

than

the

version

supported

in

this

document

is

released,

only

the

document

supporting

the

latest

version

of

XCP

is

updated.

In

addition

to

reading

this

document,

visit

the

following

websites

to

see

the

document

supporting

the

latest

version

of

XCP.

Check

the

contents

and

usage

to

confirm

whether

there

are

any

corrections

in

the

documents

XCP

version

that

you

use.

■Japanese

site

http: jp.fujitsu.com platform server sparc manual

■Global

site

http: www.fujitsu.com global services computing server sparc downloads manual

Preface

This

document

describes

the

latest

information

about

XSCF

Control

Package

(XCP)

and

the

important

and

latest

information

regarding

hardware,

firmware,

software,

and

documents

of

SPA C

M10

Systems.

Fujitsu

M10

is

sold

as

SPA C

M10

Systems

by

Fujitsu

in

Japan.

Fujitsu

M10

and

SPA C

M10

Systems

are

identical

products.

This

preface

includes

the

following

sections:

■Audience

■How

to

Use

This

Document

■elated

Documentation

■Disposal

and

recycling

■Documentation

Feedback

Audience

This

document

is

designed

for

system

administrators

with

advanced

knowledge

of

a

computer

network

and

Oracle

Solaris.

ix

Chapter

titles

in

this

document SPARC

M10-1 SPARC

M10-4 SPARC

M10-4S

Chapter

1

Software

Requirements xxx

Chapter

2

XCP

2240-Related

Information xxx

Chapter

3

Information

on

Software xxx

Chapter

4

Information

on

SPARC

M10-1

Hardware x

Chapter

5

Information

on

SPARC

M10-4

Hardware x

Chapter

6

Information

on

SPARC

M10-4S

Hardware x

Chapter

7

Information

on

PCI

Expansion

Unit

Hardware x

(when

introduced)

x

(when

introduced)

x

(when

introduced)

Chapter

8

Contents

of

Revision

of

Documentation xxx

How

to

Use

This

Document

This

document

supports

all

models

of

SPA C

M10

Systems.

Depending

on

the

server

you

use,

read

the

listed

in

the

following

table.

The

information

about

firmware

and

software,

which

are

described

in

Chapter

1,

Chapter

2,

and

Chapter

3,

is

common

to

all

models.

Some

of

the

information

are

only

a

specific

model.

In

such

case,

the

applicable

model

name

is

indicated.

The

information

about

hardware

devices

is

provided

in

Chapter

4,

Chapter

5,

and

Chapter

6

separately

for

each

model.

The

contents

common

to

all

models

are

described

in

all

chapters

describing

hardware.

Therefore,

when

you

check

the

hardware

information

about

multiple

models,

you

will

find

that

some

contents

are

duplicated

in

some

chapters.

Check

the

information

on

the

PCI

expansion

unit

(Chapter

7)

when

the

PCI

expansion

unit

is

introduced.

Contents

of

revision

of

documents

(Chapter

8)

are

provided

in

each

document.

Check

whether

the

contents

of

your

document

have

been

revised.

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

2015x

SPARC

M10

Systems

(*1)

Fujitsu

M10/SPARC

M10

Systems

Getting

Started

Guide

(*2)

Fujitsu

M10/SPARC

M10

Systems

Quick

Guide

Fujitsu

M10/SPARC

M10

Systems

Important

egal

and

Safety

Information

(*2)

Software

icense

Conditions

for

Fujitsu

M10/SPARC

M10

Systems

Fujitsu

M10/SPARC

M10

Systems

Safety

and

Compliance

Guide

Fujitsu

M10/SPARC

M10

Systems

Security

Guide

Fujitsu

M10/SPARC

M10

Systems/SPARC

Enterprise/PRIMEQUEST

Common

Installation

Planning

Manual

Fujitsu

M10/SPARC

M10

Systems

Installation

Guide

Fujitsu

M10-1/SPARC

M10-1

Service

Manual

Fujitsu

M10-4/Fujitsu

M10-4S/SPARC

M10-4/SPARC

M10-4S

Service

Manual

Crossbar

Box

for

Fujitsu

M10/SPARC

M10

Systems

Service

Manual

PCI

Expansion

Unit

for

Fujitsu

M10/SPARC

M10

Systems

Service

Manual

Fujitsu

M10/SPARC

M10

Systems PCI

Card

Installation

Guide

Fujitsu

M10/SPARC

M10

Systems

System

Operation

and

Administration

Guide

Fujitsu

M10/SPARC

M10

Systems

Domain

Configuration

Guide

Fujitsu

M10/SPARC

M10

Systems

XSCF

Reference

Manual

Fujitsu

M10/SPARC

M10

Systems RCI

User

Guide

(*3)

Fujitsu

M10/SPARC

M10

Systems

XSCF

MIB

and

Trap

ists

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

Fujitsu

M10/SPARC

M10

Systems

Glossary

*1 The listed manuals are subject to change without notice.

*2 The printed manual comes with the product.

*3 This document applies specifically to the FUJ TSU M10 and FUJ TSU ETERNUS storage system.

All

documents

for

your

server

are

available

online

at

the

following

locations.

■Sun

Oracle

software-related

manuals

(Oracle

Solaris,

and

so

on)

http://www.oracle.com/documentation/

■Fujitsu

documents

Japanese

site

http://jp.fujitsu.com/platform/server/sparc/manual/

Global

site

http://www.fujitsu.com/global/services/computing/server/sparc/downloads/manual/

The

following

table

lists

documents

SPA C

M10

Systems.

Preface xi

Note

-

Enhanced

Support

Facility

(ESF)

and

Remote

Customer

Support

System

(REMCS)

are

supported

only

for

SPARC

M10

systems

sold

within

Japan

by

Fujitsu.

Note

-

XSCF

Control

Package

(XCP):

XCP

is

a

packaged

control

program

of

the

hardware

that

configures

SPARC

M10

Systems.

An

XCP

file

includes

the

XSCF

firmware,

OpenBoot

PROM

firmware,

Power-On

Self

Test

firmware,

and

Hypervisor

firmware.

Note

-

This

information

is

applicable

to

SPARC

M10

systems

sold

within

Japan

by

Fujitsu.

Documents

provided

on

DVD-ROM

SPARC

M10/SPARC

Enterprise

Software

DVD

emote

maintenance

service

■Enhanced

Support

Facility

User's

Guide

for

EMCS

(J2X1-7753-EN)

Information

on

firmware

This

is

information

for

customers

of

Fujitsu.

Obtain

the

firmware

for

your

server

from

the

following

sources.

■Japanese

site

Customers

who

subscribed

to

SupportDesk

can

obtain

the

firmware

from

the

SupportDesk-Web.

■Global

site

Please

contact

your

local

support

provider

to

obtain

the

files

required

for

XCP

update.

The

following

files

are

provided.

■Firmware

program

file

(XSCF

Control

Package

(XCP)

file)

■XSCF

extended

MIB

(XSCF-SP-MIB)

definition

file

Disposal

and

recycling

For

product

disposal

and

recycling

(paid

service),

contact

your

sales

representatives.

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

2015xii

Documentation

Feedback

If

you

have

any

comments

or

requests

regarding

this

document,

please

take

a

moment

to

share

it

with

us

by

indicating

the

manual

code,

manual

title,

and

page,

and

stating

your

points

specifically

through

the

following

websites:

■Japanese

site

http://jp.fujitsu.com/platform/server/sparc/manual/

■Global

site

http://www.fujitsu.com/global/services/computing/server/sparc/downloads/manual/

Preface xiii

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

2015xiv

Table

1-1

XCP,

Oracle

Solaris,

and

required

SRU patches

supported

by

the

SPARC

M10

system

Server XCP Oracle

Solaris Required

packages(*4)

Required

products(*5)

Required

SRU(*4)

Required

patch(*5)

SPARC

M10-1

SPARC64

X+

3.2

GHz

2210

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU1.4

or

later(*3)

Oracle

Solaris

10

1 13 Oracle

VM

Server

for

SPARC

3.0

or

later(*3)

150310-02

or

later

SPARC64

X

2.8

GHz

2012

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU1.4

or

later(*3)

Oracle

Solaris

10

1 13 Oracle

VM

Server

for

SPARC

3.0

or

later(*3)

150310-02

or

later

Chapter

1

Software

Requirements

This

chapter

describes

the

software

requirements

for

using

SPA C

M10

Systems.

■XCP/Oracle

Solaris

and

equired

S U/Patch

■How

to

Obtain

XCP

and

Oracle

Solaris

S U/Patch/Oracle

VM

Server

for

SPA C

■Web

Browser

■Existing

XCP

Firmware

Versions

and

Support

Information

XCP/Oracle

Solaris

and

Required

SRU/Patch

The

following

lists

XCP,

Oracle

Solaris,

and

required

S U/patch

supported

on

SPA C

M10

Systems.

1

Table

1-1

XCP,

Oracle

Solaris,

and

required

SRU patches

supported

by

the

SPARC

M10

system

(continued)

Server XCP Oracle

Solaris Required

packages(*4)

Required

products(*5)

Required

SRU(*4)

Required

patch(*5)

SPARC

M10-4

SPARC64

X+

3.4

GHz

2210

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU1.4

or

later(*3)

Oracle

Solaris

10

1 13 Oracle

VM

Server

for

SPARC

3.0

or

later(*3)

150310-02

or

later

SPARC64

X

2.8

GHz

2012

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU1.4

or

later(*3)

Oracle

Solaris

10

1 13 Oracle

VM

Server

for

SPARC

3.0

or

later(*3)

150310-02

or

later

SPARC

M10-4S

(Direct

inter-chassis

connection)

SPARC64

X+

3.7

GHz

2210

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU1.4

or

later(*3)(*7)

Oracle

Solaris

10

1 13(*6)

Oracle

VM

Server

for

SPARC

3.0

or

later(*3)(*7)(*8)

150310-02

or

later(*8)

SPARC64

X

3.0

GHz

2031

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU1.4

or

later(*3)(*7)

Oracle

Solaris

10

1 13(*6)

Oracle

VM

Server

for

SPARC

3.0

or

later(*3)(*7)(*8)

150310-02

or

later(*8)

SPARC

M10-4S

(Connection

through

crossbar

box)

SPARC64

X+

3.7

GHz

2210

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU1.4

or

later(*3)(*7)

Oracle

Solaris

10

1 13(*6)

Oracle

VM

Server

for

SPARC

3.0

or

later(*3)(*7)(*8) 150310-02

or

later(*8)

SPARC64

X

3.0

GHz

2043

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU1.4

or

later(*3)(*7)

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

20152

Table

1-1

XCP,

Oracle

Solaris,

and

required

SRU patches

supported

by

the

SPARC

M10

system

(continued)

Server XCP Oracle

Solaris Required

packages(*4)

Required

products(*5)

Required

SRU(*4)

Required

patch(*5)

Oracle

Solaris

10

1 13(*6)

Oracle

VM

Server

for

SPARC

3.0

or

later(*3)(*7)(*8)

150310-02

or

later(*8)

*1

Required

for

the

control

domain

and

the

guest

domain.

Included

in

group/system/solaris-large-server

and

group/system/solaris-small-server.

*2 Required only for the control domain. ncluded in group/system/solaris-large-server and group/system/solaris-small-server.

*3 Required only for the control domain.

*4 For Oracle Solaris 11.

*5 For Oracle Solaris 10.

*6 f Oracle Solaris 10 1/13 is to be run in the control domain, the CPUs that can be assigned to the control domain are those CPUs that are

mounted on logical system boards with LSB numbers 0 to 7. There are no LSB number limitations on the CPUs that can be assigned to

the guest domain. f the Oracle Solaris 10 1/13 is run in the guest domain, however, up to 1024 CPUs (vcpus) can be assigned to a single

guest domain.

*7 Refer to "Notes when using a version older than Oracle VM Server for SPARC 3.1.0.1".

*8 Refer to "Notes on using Oracle Solaris 10".

Note

-

When

Oracle

Solaris

11.1 Oracle

Solaris

11.2

is

installed

or

booted

from

DVD

media

in

a

SPARC

M10

system,

the

following

two

messages

are

displayed.

Ignore

these

messages

because

they

have

no

impact

on

installation

work.

[Message

example

1]

Dec

21

02:18:22

solaris

genunix:

NOTICE:

core_log:

ldmd[1978]

core

dumped:

tmp core

Dec

21

02:18:22

solaris

svc.startd[9]:

ldoms ldmd:default

failed

fatally:

transitioned

to

maintenance

(see

'svcs

-xv'

for

details)

[Message

example

2]

SUNW-MSG-ID:

SMF-8000-YX,

TYPE:

defect,

VER:

1,

SEVERITY:

major

EVENT-TIME:

Fri

Dec

21

02:18:50

UTC

2012

PLATFORM:

ORCL,SPARC64-X,

CSN:

2081210008,

HOSTNAME:

solaris

SOURCE:

software-diagnosis,

REV:

0.1

EVENT-ID:

5cf4edb8-0613-cbe0-acb1-a9a28a2fac10

DESC:

A

service

failed

-

a

start,

stop

or

refresh

method

failed.

AUTO-RESPONSE:

The

service

has

been

placed

into

the

maintenance

state.

IMPACT:

svc: ldoms ldmd:default

is

unavailable.

REC-ACTION:

Run

'svcs

-xv

svc: ldoms ldmd:default'

to

determine

the

generic

reason

why

the

service

failed,

the

location

of

any

logfiles,

and

a

list

of

other

services

impacted.

Please

refer

to

the

associated

reference

document

at

http: support.oracle.com msg SMF-8000-YX

for

the

latest

service

procedures

and

policies

regarding

this

diagnosis.

Chapter

1　

Software

Requirements 3

Note

-

When

Oracle

Solaris

11.1

is

installed

in

SPARC

M10

Systems,

the

following

message

appears

at

the

start

of

Oracle

Solaris.

[Example

of

message]

WARNING:

failed

to

instantiate

provider

ldmd

for

process

753

WARNING:

failed

to

instantiate

provider

ldmd

for

process

753

Sep

24

06:15:59

svc.startd[11]:

svc: ldoms ldmd:default:

Method

" opt SUNWldm bin ldmd_

start"

failed

with

exit

status

95.

Sep

24

06:15:59

svc.startd[11]:

ldoms ldmd:default

failed

fatally:

transitioned

to

maintenance

(see

'svcs

-xv'

for

details)

After

Oracle

Solaris

11.1

is

installed,

apply

SRU1.4

or

later.

Then,

the

Oracle

VM

Server

for

SPARC

package

is

updated

to

the

version

supporting

SPARC

M10

Systems,

and

such

message

will

no

longer

be

output.

For

other

information

about

Oracle

Solaris,

see

"Problems

with

Oracle

Solaris

and

Workarounds."

Notes

on

using

Oracle

Solaris

10

■[SPA C

M10-4S]

When

the

control

domain

is

running

on

Oracle

Solaris

10

with

Oracle

VM

Server

for

SPARC

version

3. .0.

or

older,

if

the

physical

partition

dynamic

reconfiguration

(PPA

D )

feature

is

enabled,

the

ldoms/ldmd

service

fails

to

start

and

Oracle

VM

for

SPA C

does

not

work.

The

PPA

D

feature

is

enabled

at

the

time

of

shipment.

Therefore,

either

disable

the

PPA

D

feature

before

setting

up

logical

domains,

or,

update

Oracle

VM

Server

for

SPA C

to

version

3.1.0.1

or

later.

Configuration

of

the

PPA

D

feature

is

performed

with

the

setpparmode(8)

command

of

XSCF

firmware.

For

details

on

the

setpparmode(8)

command,

refer

to

Fujitsu

M10/SPARC

M10

Systems

XSCF

Reference

Manual.

To

update

Oracle

VM

Server

for

SPA C

version

to

3.1.0.1,

apply

patch

no.

150817-01

after

installing

Oracle

VM

Server

for

SPA C

3.1.

■[SPA C

M10-4S]

When

Oracle

Solaris

10

is

running

on

the

control

domain,

in

order

to

perform

dynamic

reconfiguration

of

physical

partitions

(PPA

D )

with

the

deleteboard(8),

addboard(8)

commands,

update

to

Oracle

VM

Server

for

SPA C

3.1.1

or

newer.

When

updating

to

3.1.1,

apply

patch

150817-02

after

installing

Oracle

VM

Server

for

SPA C

3.1.

Notes

when

using

a

version

older

than

Oracle

VM

Server

for

SPARC

3.1.0.1

[SPA C

M10-4S]

When

the

physical

partition

dynamic

reconfiguration

(PPA

D )

feature

is

enabled

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

20154

Table

1-2

List

of

XCP,

Oracle

Solaris,

and

required

SRU patches

needed

for

physical

partition

dynamic

reconfiguration

Server XCP Oracle

Solaris Required

packages

Required

products

Required

SRU

Required

patch

SPARC

M10-4S

2220

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

None

Oracle

Solaris

11.1 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU11.1.14

or

later(*3)

Oracle

Solaris

10

1 13 Oracle

VM

Server

for

SPARC

3.1(*4) 150817-02

or

later(*4)(*5)

*1 Required for the control domain and the guest domain. ncluded in group/system/solaris-large-server and group/system/solaris-small-

server.

*2 Required only for the control domain. ncluded in group/system/solaris-large-server and group/system/solaris-small-server.

*3 Required for the control domain and the guest domain. Though SRU11.1.14 includes Oracle VM Server for SPARC 3.1.0.1, the

modification for Solaris 11.1 to fix Bug D#17709858 is required to ensure stable DR functionality. This issue has been resolved in

SRU11.1.15 and later.

*4 Required only for the control domain.

*5 Do not apply patch 150400-01 to 150400-06.

on

an

Oracle

VM

Server

for

SPA C

version

that

is

older

than

3.1.0.1,

the

ldoms/ldmd

service

fails

to

start

and

thus

Oracle

VM

Server

for

SPA C

does

not

function.

If

using

an

Oracle

VM

Server

for

SPA C

version

that

is

older

than

3.1.0.1,

disable

the

PPA

D

feature

before

setting

up

logical

domains.

Configuration

of

the

PPA

D

feature

is

performed

with

the

setpparmode(8)

command

of

XSCF

firmware.

For

details

on

the

setpparmode(8)

command,

refer

to

Fujitsu

M10/SPARC

M10

Systems

XSCF

Reference

Manual.

Meanwhile,

in

case

of

Oracle

Solaris

11,

Oracle

VM

Server

for

SPA C

3.1.0.1

is

included

in

S U11.1.14.

Required

XCP/Oracle

Solaris

and

required

SRU/patch

to

enable

dynamic

reconfiguration

of

physical

partition

The

following

lists

XCP,

Oracle

Solaris,

and

required

S U/patch

to

enable

dynamic

reconfiguration

of

physical

partition.

Required

XCP/Oracle

Solaris

and

required

SRU/patch

to

enable

dynamic

reconfiguration

of

PCIe

endpoint

device

The

following

lists

XCP,

Oracle

Solaris,

and

required

S U/patch

to

enable

dynamic

reconfiguration

of

PCIe

endpoint

device.

Chapter

1　

Software

Requirements 5

Table

1-3

List

of

XCP,

Oracle

Solaris,

and

SRU patches

needed

for

dynamic

reconfiguration

of

PCIe

endpoint

device

Server XCP Oracle

Solaris Required

packages

Required

products

Required

SRU

Required

patch

SPARC

M10-1

SPARC

M10-4

SPARC

M10-4S

2230

or

later

Oracle

Solaris

11.2 system ldoms(*1)

system ldoms ldomsmanager(*2)

SRU11.2.2

or

later

Oracle

Solaris

11.1(*4) system ldoms(*1) SRU11.1.17

or

later(*3)

Oracle

Solaris

10

1 13 Oracle

VM

for

SPARC

3.1(*5)(*6) 150817-03

or

later(*5)

*1

Required

for

the

control

domain

and

other

domains.

Included

in

group/system/solaris-large-server

and

group/system/solaris-small-server.

*2 Required only for the control domain. ncluded in group/system/solaris-large-server and group/system/solaris-small-server.

*3 Required for the control domain and other domains.

*4 Can be used only in domains other than the control domain.

*5 Required only for the control domain.

*6 There are patches required other than the Oracle VM Server for SPARC patch. For details, see "Required Oracle Solaris OS Versions for

Oracle VM Server for SPARC 3.1.1.1" in the Oracle

VM

Server

for

SPARC

3.1.1.1,

3.1.1,

and

3.1

Release

Notes.

Table

1-4

Software

supporting

Software

on

Chip

(when

used

with

Oracle

Database)

Function Operating

environment

The

decimal

floating-point

arithmetic

processing

(Oracle

Number)

Oracle

Database

12c

or

later

Oracle

Solaris

11.1

or

later

SIMD

(In-memory

processing) Oracle

Database

12c

Enterprise

Edition

Oracle

Database

In

Memory

Oracle

Solaris

11.1

or

later

Cryptographic

processing Oracle

Database

12c

Enterprise

Edition

Oracle

Advanced

Security

Oracle

Solaris

11.1

or

;ater

Software

supporting

Software

on

Chip

The

Software

on

Chip

(SoC)

on

the

SPA C64

X+/SPA C64

X

processor

can

be

used

with

the

software

below.

When

used

with

Oracle

Database

Fujitsu

M10/SPARC

M10

Systems

Product

Notes

for

XCP

Version

2240

･

March

20156

Fujitsu M10 Series Service manual

Popular Server manuals by other brands