Fujitsu PRIMEQUEST 2000 Series Service manual

C122-E177-02EN
FUJITSU Server
PRIMEQUEST
2000 Series
Tool Reference

Preface
Preface
This manual provides information on operation methods and settings, including details on the MMB, and EFI functions.
The manual is intended for system administrators.
For details on the regulatory compliance statements and safety precautions, see the PRIMEQUEST 2000 Series Safety
and Regulatory Information (C122-E171EN).
Errata and addenda for the manual
The PRIMEQUEST 2000 Series Errata and Addenda (C122-E182EN) provides errata and addenda for the manual.
Read the PRIMEQUEST 2000 Series Errata and Addenda (C122-E182EN) thoroughly in reference to the manual.
Organization of this manual
This manual is organized as follows.
CHAPTER 1MMB Web-UI (Web User Interface) Operations
Chapter 1 describes the menus used to manage and operate the PRIMEQUEST 2000 series server with the MMB Web-
UI. It also describes how to use the MMB Web-UI.
CHAPTER 2 MMB CLI (Command Line Interface) Operations
Chapter 2 describes the CLI (command line interface) provided by the MMB.
CHAPTER 3 UEFI Menu Operations
Chapter 3 describes the menu operations of the UEFI.
CHAPTER 4 UEFI Command Operations
Chapter 4 describes the command operations of the UEFI.
CHAPTER 5 Dynamic Reconfiguration Operation
Chapter 5 describes the Dynamic Reconfiguration operation.
CHAPTER 6 Setting of sadump enviroment
Chapter 6describes the setting of sadump enviroment.
Appendix A List of Setting Items
Appendix A lists the setting items for each window.

Preface
Revision History
Edition Date Revised location (type) (*1) Description
01 2014-2-18 - -
02 2014-4-10 The entire manual Dynamic Partitioning
-> Dynamic Reconfiguration
DP -> DR
1.2.11 [Fan] windows -Warning is added to Stataus.
1.2.13 [SB]menu -Description change of Core/Max Core
-
Bad Block and Shielded are added to Status
of Physical Drive.
-FBU item deletion
1.2.15 [DU] Menu - Bad Block and Shielded are
added to Status
of Physical Drive.
1.3.1 [Power Control] Window -
The operation at kdump by Linux OS is
added.
-
Stop Error is deleted from System Progress
of Power Control. The effect that System
Progress does not become Panic in Windows
is added.
1.3.4 [Partition Configuration] Menu -
FIGURE 1.47 [Add SB/IOU to Partition]
Window is replaced.
-The View Configuration button is deleted.
1.3.6 [Power Management Setup] Window -
An unnecessary Item [Power save Grace
Period] description is deleted.
1.3.7 [Partition#x] Menu
[ASR Control] Window -
The description of [Cancel Boot Watchdog] is
deleted.
1.3.7 [Partition#x] Menu
[Information]Window -Description change of Core/Max Core
1.5.3
[Management LAN Port Configuration]
window -1G/Full of User Port is deleted.
1.7.7 [Power Control] Window -
Stop Error is deleted from System Progress
of Power Control. The effect that System
Progress does not become Panic in Windows
is added.
2.2.4 console - Execution authority change (CE and
Operator addition)
2.2.14 set partition dynamic_reconfiguration -
The execution privilege is changed only to
Administrator.
-An unnecessary explanation when the power
supply is On is deleted.
2.2.30 set partition pci_address_mode - The description
mistake of Usage example is
corrected. (pc->pci)
2.2.37 hotremove partition -The example of IOU is corrected.

Preface
Edition Date Revised location (type) (*1) Description
2.3.31 help -
Console is added to Operator and the CE
authority.
3.4 [Device Manager] Menu -
"I/O Space Assignment Configuration" and
"PCI Bus Padding Configuration" are
integrated into the menu under the control of
"PCI Subsystem Configuration".
-
TABLE 3.10 Displayed contents of menu
selection
(
The description of Driver Health menu is
added.)
3.4.4 [PCI Subsystem Configuration] Menu FIGURE 3.17*
Display Example on [PCI
Subsystem Configuration] Menuis replaced.
3.4.5* [PCI Bus Padding Configuration] Menu -This chapter is deleted.
3.4.7* -
It moves to the subordinate of "PCI
Subsystem Configuration" as "OpROM Scan
Configuration Menu" bringing "IOU OpROM
Scan Configuration Menu" and "3.4.8
PCI_Box OpROM Scan Configuration menu"
together.
3.5.4 [Boot From DVD/CD] Menu -
The chapter of "Boot From DVD/CD Menu"
is added.
3.5.4* [Set Time out Value] Menu - [Set T
ime out Value] is changed to [Set
Boot Delay Time].
- FIGURE 3.73*
Display Example of [Set
Time out Value] Menu is replaced.
TABLE 3.70 Display Content of Menu
Selection Help Display
- [Auto Boot Time-
out] is changed to [Boot
Delay Time].
5.1.1.2 Description - The explanation is added.
A.2 Setting Items on UEF -
It changes additionally to the UEFI menu
composition.
1.2.7 [System Setup]Window
1.2.8 [System Power Control] window
1.2.18 [MMB] Menu
1.3.1 [Power Control] Window
1.3.4 [Partition Configuration] Menu
1.3.5 [Reserved SB Configuration] window
1.3.7 [Partition#x] Menu
2.2.1 add partition
2.2.4 console
2.2.6 poweroff
2.2.7 poweron
Message change

Preface
Edition Date Revised location (type) (*1) Description
2.2.8 sadump
2.2.9 reset
2.2.10 nmi
2.2.28 set partition memory_opration_mode
2.6.3 poweron
2.6.6 set memory_opration_mode
2.6.7 set memory_mirror_ras_mode
2.2.14 set partition dynamic_reconfiguration
2.2.28 set partition memory_opration_mode
2.2.27 set partition memory_mirror_ras_mod
2.2.30 set partition pci_address_mode
2.2.26 set partition lan_device_mode
2.6.6 set memory_opration_mode
2.6.7 set memory_mirror_ras_mode
2.6.8 set lan_device_mode
quiet option meaning correction
1.2.8 [System Power Control] window
1.3.1 [Power Control] Window
1.3.5 [Reserved SB Configuration] window
1.3.7 [Partition#x] Menu [Mode] Window
1.7.7 [Power Control] Window
1.7.13 [Mode] Window
2.1.3 CLI command list
2.2.1 add partition
2.2.7 poweron
2.2.27 set partition memory_mirror_ras_mode
2.2.28 set partition memory_opration_mode
2.3.11 show partition memory_operation_mode
2.6.1
PRIMEQUEST2800B model CLI
command list
2.6.3 poweron
2.6.6 set memory_opration_mode
2.6.7 set memory_mirror_ras_mode
2.6.9 show memory_operation_mode
A.1.15 Setting Items of [Mode] Window
Mirror Mode ->Mode
2.2.38 pciinfo partition pciinfo partition command addition
*1: Chapter, section, and item numbers in the "Revised location" column refer to those in the latest edition of the
document. However, a number marked with an asterisk (*) denotes a chapter, section, or item in a previous
edition of the document.

Preface
Product operating environment
This product is a computer intended for use in a computer room environment. For details on the product operating
environment, see the following manual:
PRIMEQUEST 2000 Series Hardware Installation Manual (C122-H007EN)
Safety Precautions
Alert messages
This manual uses the following alert messages to prevent users and bystanders from being injured and to prevent
property damage.
This indicates a hazardous situation that is likely to result in death
or serious personal injury if the user does not perform the
procedure correctly.
This indicates a hazardous situation that could result in minor or
moderate personal injury if the user does not perform the
procedure correctly. This also indicates that damage to the product
or other property may occur if the user does not perform the
procedure correctly.
This indicates information that could help the user use the product
more efficiently.
Alert messages in the text
An alert statement follows an alert symbol. An alert statement is indented on both ends to distinguish it from regular text.
Similarly, one space line is inserted before and after the alert statement.
Only Fujitsu certified service engineers should perform the
following tasks on this product and the options provided by Fujitsu.
Customers must not perform these tasks under any circumstances.
Otherwise, electric shock, injury, or fire may result.
-Newlyinstalling or moving equipment
-Removing the front, rear, and side covers
-Installing and removing built-in options
-Connecting and disconnecting external interface cables
-Maintenance (repair and periodic diagnosis and maintenance)
The List of important alert items table lists important alert items.
List of important alert items
The important warning matter that has been described in this manual is as follows.
This indicates a hazardous situation that could result in minor or
moderate personal injury if the user does not perform the
procedure correctly. This also indicates that damage to the
product or other property may occur if the user does not perform

Preface
the procedure correctly
Operation division Content of alert Chapter of description
Normal operation (data destruction)
Reconfirm whether the selection of the disk is
correct when you select the dump device. Data is
destroyed when executing it with the selection
makes a mistake.
6.6 Dump device
selection menu
Warning labels
The following warning labels are affixed to this product. These labels are intended for the users of this product.
Never remove the warning labels.
Notes on Handling the Product
About this product
This product is designed and manufactured for standard applications. Such applications include, but are not limited to,
general office work, personal and home use, and general industrial use. The product is not intended for applications that
require extremely high levels of safety tobe guaranteed (referred to below as "safety-critical" applications). Use of the
product for a safety-critical application may present a significant risk of personal injury and/or death. Such applications
include, but are not limited to, nuclear reactor control, aircraft flight control, air traffic control, mass transit control, medical
life support, and missile launch control. Customers shall not use the product for a safety-critical application without
guaranteeing the required level of safety. Customers who plan to use the product in a safety-critical system are requested
to consult the Fujitsu sales representatives in charge.
Storage of accessories
Keep the accessories in a safe place because they are required for server operations.
Adding optional products
For stable operation of the PRIMEQUEST2000series server, use only a Fujitsu-certified optional product as an added
option.
Note that the PRIMEQUEST 2000 series server is not guaranteed to operate with any optional product not certified by
Fujitsu.
Exportation/release of this product
Exportation/release of this product may require necessary procedures in accordance with the regulations of the Foreign
Exchange and Foreign Trade Control Law of Japan and/or US export control laws.
Maintenance

Preface
Only Fujitsu certified service engineers should perform the following tasks on this product and the
options provided by Fujitsu. Customers must not perform these tasks under any circumstances.
Otherwise, electric shock, injury, or fire may result.
- Newlyinstalling or moving equipment
- Removing the front, rear, and side covers
- Installing and removing built-in options
- Connecting and disconnecting external interface cables
- Maintenance (repair and periodic diagnosis and maintenance)
Only Fujitsu certified service engineers should perform the following tasks on this product and the
options provided by Fujitsu. Customers must not perform these tasks under any circumstances.
Otherwise, product failure may result. PRIMEQUEST 2000 Series General Description
- Unpacking an optional Fujitsu product, such as an optional adapter, delivered to the customer
Modifying or recycling the product
Modifying this product or recycling a secondhand product by overhauling it without prior approval
may result in personal injury to users and/or bystanders or damage to the product and/orother
property.
Note on erasing data from hard disks when disposing of the product or transferring it
Disposing of this product or transferring it as is may enable third parties to access the data on the hard disk and use it for
unforeseen purposes. To prevent the leakage of confidential information and important data, all of the data on the hard
disk must be erased before disposal or transfer of the product.
However, it can be difficult to completely erase all of the data from the hard disk. Simply initializing (reformatting) the hard
disk or deleting files on the operating system is insufficient to erase the data, even though the data appears at a glance to
have been erased. This type of operation only makes it impossible to access the data from the operating system.
Malicious third parties can restore this data.
If you save your confidential information or other important data on the hard disk, you should completely erase the data,
instead of simply carrying out the aforementioned operation, to prevent the data from being restored. To prevent important
data on the hard disk from being leaked when the product is disposed of or transferred, you will need to take care to erase
all the data recorded on the hard disk on your own responsibility.
Furthermore, if a software license agreement restricts the transfer of the software (operating system and application
software) on the hard disk in the server or other product to a third party, transferring the product without deleting the
software from the hard disk may violate the agreement. Adequate verification from this point of view is also necessary.
Product and service inquiries
For all product use and technical inquiries, contact the distributor where you purchased your product, or a Fujitsu sales
representative or systems engineer (SE). If you do not know the appropriate contact address for inquiries about the
PRIMEQUEST 2000 series, use the Fujitsu contact line.
Fujitsu contact line
We acceptWeb inquiries. For details, visit our website:
https://www-s.fujitsu.com/global/contact/computing/PRMQST_feedback.html
Warranty

Preface
If a component failure occurs during the warranty period, we will repair it free of charge in accordance with the terms of the
warranty agreement. For details, see the warranty.
Before requesting a repair
If a problem occurs with the product, confirm the problem by referring to 11.2 Troubleshooting in the PRIMEQUEST 2000
Series Administration Manual (C122-E175EN). If the error recurs, contact your sales representative or a field engineer.
Confirm the model name and serial number shown on the label affixed to the right front of the device and report it. Also
check any other required items beforehand according to 11.2 Troubleshooting in the PRIMEQUEST 2000 Series
Administration Manual (C122-E175EN).
The system settings saved by the customer will be used during maintenance.
Manual
How to use this manual
This manual contains important information about the safe use of this product. Read the manual thoroughly to understand
the information in it before using this product. Be sure to keep this manual in a safe and convenientlocation for quick
reference.
Fujitsu makes every effort to prevent users and bystanders from being injured and to prevent property damage. Be sure to
use the product according to the instructions in the manual.
Exportation/release of this document may require necessary procedures in accordance with the regulations of the Foreign
Exchange and Foreign Trade Control Law of Japan and/or US export control laws.
Manuals for the PRIMEQUEST 2000 series
The following manuals have been prepared to provide you with the information necessary to use the PRIMEQUEST 2000
series.
You can access HTML versions of these manuals at the following sites:
Japanese-language site: http://jp.fujitsu.com/platform/server/primequest/manual/2000/
Global site: http://www.fujitsu.com/global/services/computing/server/primequest/
Title Description Manual code
PRIMEQUEST 2000
Series Getting Started
Guide
Describes what manuals you should read and
how to access important information after
unpacking the PRIMEQUEST2000 series
server. (This manual comes with the product.)
C122-E170EN
PRIMEQUEST 2000
Series Safety and
Regulatory Information
Contains important information required for using
the PRIMEQUEST 2000 series safely. C122-E171EN
PRIMEQUEST 2000
Series Errata and
Addenda
Provides errata and addenda for the
PRIMEQUEST 2000 series manuals. This
manual will be updated as needed.
C122-E182EN
PRIMEQUEST 2000
Series General
Description
Describes the functions and features of the
PRIMEQUEST 2000 series. C122-B025EN
SPARC M10 Provides the necessary information and C120-H007EN

Preface
Title Description Manual code
Systems/SPARC
Enterprise/PRIMEQUEST
Common Installation
Planning Manual
concepts you should understand for installation
and facility planning for SPARC M10 Systems,
SPARC Enterprise, and PRIMEQUEST
installations.
PRIMEQUEST 2000
Series Hardware
Installation Manual
Includes the specifications of and the installation
location requirements for the PRIMEQUEST
2000 series.
C122-H007EN
PRIMEQUEST 2000
Series Installation Manual Describes how to set up the PRIMEQUEST 2000 series server, including the steps for
installation preparation, initialization, and software
installation.
C122-E174EN
PRIMEQUEST 2000
Series User Interface
Operating Instructions
Describes how to use theWeb-UI and UEFI to
assure proper operation of the PRIMEQUEST
2000 series server.
C122-E176EN
PRIMEQUEST 2000
Series Administration
Manual
Describes how to use tools and software for
system administration and how to maintain the
system (component replacement and error
notification).
C122-E175EN
PRIMEQUEST 2000
Series Tool Reference Provides information on operation methods and settings, including details on the MMB and UEFI
functions.
C122-E177EN
PRIMEQUEST 2000
Series Message
Reference
Lists the messages that may be displayed when
aproblem occurs during operation and describes
how to respond to them
C122-E178EN
PRIMEQUEST 2000
Series REMCS
Installation Manual
Describes REMCS service installation and
operation. C122-E180EN
PRIMEQUEST 2000
Series Glossary Defines the PRIMEQUEST 2000 series related terms and abbreviations. C122-E179EN
Related manuals
The following manuals relate to the PRIMEQUEST 2000 series.
You can access these manuals at the following site:
http://www.fujitsu.com/global/services/computing/server/primequest/
Contact your sales representative for inquiries about the ServerView manuals.
Title Description Manual code
ServerView Suite
ServerView Operations
Manager Quick
Installation (Windows)
Describes how to install and start ServerView
Operations Manager in aWindows environment. None
ServerView Suite
ServerView Operations
Manager Quick
Describes how to install and start ServerView
Operations Manager in a Linux environment. None

Preface
Title Description Manual code
Installation (Linux)
ServerView Suite
ServerView Installation
Manager
Describes the installation procedure using
ServerView Installation Manager. None
ServerView Suite
ServerView Operations
ManagerServer
Management
Provides an overview of server monitoring using
ServerView Operations Manager, and describes
the user interface of ServerView Operations
Manager.
None
ServerView Suite
ServerView RAID
Management User
Manual
Describes RAID management using ServerView
RAID Manager. None
ServerView Suite Basic
Concepts Describes basic concepts about ServerView Suite. None
ServerView Operations
ManagerInstallation
ServerView Agents for
Linux
Describes installation and update installation of
ServerView Linux Agent. None
ServerView Operations
ManagerInstallation
ServerView Agents for
Windows
Describes installation and update installation of
ServerViewWindows Agent. None
ServerView RAID
ManagerVMware
vSphere ESXi 5
Installation Guide
Describes the installation and settings required to
use ServerView RAID Manageron the VMware
vSphere ESXi 5 server.
None
MegaRAID SAS User
Guide Provides technical information on using array controller (RAID Ctrl SAS 6G 5/6
512MB(D2616), RAID Ctrl SAS 6G 0/1(D2607),
MegaRAID SAS 9280-8e)
B7FY-2751
Abbreviations
This manual uses the following product name abbreviations.
Formal product name Abbreviation
Microsoft ®Windows Server ®2012 R2 Datacenter Windows,Windows Server 2012
Microsoft ®Windows Server ®2012 R2 Standard
Microsoft ®Windows Server ®2012 Datacenter
Microsoft ®Windows Server ®2012 Standard
Microsoft（R）Windows Server（R）2008 R2 Standard Windows, Windows Server 2008 R2
Microsoft（R）Windows Server（R）2008 R2 Enterprise
Microsoft（R）Windows Server（R）2008 R2 Datacenter
Red Hat（R）Enterprise Linux（R）6（for Intel64）Linux RHEL6

Preface
Formal product name Abbreviation
Oracle Linux 6 (x86_64) Oracle Linux, Oracle Linux 6
VMware vSphere（R）5 VMware, vSphere 5.x, VMware 5, VMware 5.x
VMware（R）ESXi（R）5 ESX, ESX 5, ESX 5.x
Novell (R) SUSE(R) LINUX Enterprise Server 11 Service Pack 3 SLES11 SP3
Trademarks
-Microsoft,Windows, andWindows Server are trademarks or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
-Linux is a registered trademark of Linus Torvalds.
-Red Hat, the Shadowman logo and JBoss are registered trademarks of Red Hat, Inc. in the U.S. and other countries.
-Oracle and Java are registered trademark of Oracle Corporation and its related company.
-Celeron, Celeron Inside, Centrino, Centrino Inside, Core Inside, Intel, the Intel logo, Intel Atom, Intel Atom Inside,
Intel Core, Intel Inside, the Intel Inside logo, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, the Rapid
Start Technology logo, vPro Inside, Ultrabook, Xeon, and Xeon Inside are trademarks or registered trademarks of
Intel Corporation in the U.S. and other countries.
-Ethernet is a registered trademark of Fuji Xerox Co., Ltd. in Japan and is a registered trademark of Xerox Corp. in
the United States and other countries.
-VMware is a trademark or registered trademark of VMware, Inc. in the United States and other countries.
-Novell and SUSE Linux Enterprise Server are trademarks of Novell, Inc.
-Xen is a trademark or registered trademark of Citrix Systems, Inc. or its subsidiaries in the United States and other
countries.
-Other company names and product names are the trademarks or registered trademarks of their respective owners.
-Trademark indications are omitted for some system and product names in this manual.
Notation
This manual uses the following fonts and symbols to express specific types of information.
Font or
symbol
Meaning Example
italics Title of a manual that you should refer to
See the PRIMEQUEST 2000 Series Installation
Manual (C122-E174EN).
[ ] Window names as well as the names of
buttons, tabs, and drop-down menus in
windows are enclosed in brackets.
Click the [OK] button.
Notation for the CLI (command line interface)
The following notation is used for commands.
Command syntax
Command syntax is represented as follows.
-Variables requiring the entry of a value are enclosed in angle brackets < >.
-Optional elements are enclosed in brackets [ ].
-Options for optional keywords are grouped in | (stroke) separated lists enclosed in brackets [ ].
-Options for required keywords are grouped in | (stroke) separated lists enclosed in braces { }.

Preface
Command syntax is written in a box.
Remarks
The command output shown in the PDF manuals may include line feeds at places where there is no line feed symbol (¥at
the end of the line).
Notes on notations
-In this manual, the Management Board and MMB firmware are abbreviated as "MMB."
-In this manual,, IOU_10GbE and IOU_1GbE are matched and it is written as "IOU".
-Screenshots contained in this manual may differ from the actual product screen displays.
-The IP addresses, configuration information, and other such information contained in this manual are display
examples and differ from that for actual operation.
-If you have a comment or request regarding this manual, or if you find any part of this manual unclear, please take a
moment to share it with us by filling in the form at the following webpage, stating your points specifically, and sending
the form to us:
https://www-s.fujitsu.com/global/contact/computing/PRMQST_feedback.html
-The contents of this manual may be revised without prior notice.
-The PDF file of this manual is intended for display using Adobe® Reader® in single page viewing mode at 100%
zoom.
-The PSU_P supports only 200 V power supply.

Preface
Contents
Preface................................................................................................................................................................................................................i
CHAPTER 1 MMB Web-UI (Web User Interface) Operations............................................................................................................. 33
1.1 Web-UI Menus............................................................................................................................................................................ 33
1.1.1 Web-UI menus (Administrator)............................................................................................................................................. 34
1.1.2 Web-UI menus (Operator)..................................................................................................................................................... 37
1.1.3 Web-UI menus (Partition Operator)...................................................................................................................................... 40
1.1.4 Web-UI menus (User) ........................................................................................................................................................... 44
1.1.5 Web-UI menus (CE).............................................................................................................................................................. 47
1.1.6 Web-UI menus in maintenance mode.................................................................................................................................. 51
1.1.7 Web-UI menus in maintenance mode (Administrator)........................................................................................................ 51
1.1.8 Web-UI menus in maintenance mode (Operator) ............................................................................................................... 53
1.1.9 Web-UI menus in maintenance mode (Partition Operator)................................................................................................. 55
1.1.10 Web-UI menus in maintenance mode (User) ................................................................................................................. 57
1.1.11 Web-UI menus in maintenance mode (CE).................................................................................................................... 59
1.1.12 Web-UI menus in maintenance mode (maintenance personnel).................................................................................. 60
1.1.13 Web-UI menus (PRIMEQUEST 2800B model).............................................................................................................. 63
1.2 [System] Menu for PRIMEQUEST 2400E/2800E.................................................................................................................... 66
1.2.1 [System Status] window........................................................................................................................................................ 66
1.2.2 [System Event Log] Window................................................................................................................................................. 67
1.2.3 [Operation Log] Window........................................................................................................................................................ 73
1.2.4 [Partition Event Log] Window................................................................................................................................................ 76
1.2.5 [System Information] Window............................................................................................................................................... 79
1.2.6 [Firmware Information] Window............................................................................................................................................ 80
1.2.7 [System Setup]Window........................................................................................................................................................ 82
1.2.8 [System Power Control] window........................................................................................................................................... 85
1.2.9 [LEDs] window....................................................................................................................................................................... 87
1.2.10 [Power Supply] window .................................................................................................................................................... 89
1.2.11 [Fans] window................................................................................................................................................................... 90
1.2.12 [Temperature] window...................................................................................................................................................... 93
1.2.13 [SB] Menu.......................................................................................................................................................................... 94
1.2.14 [IOU] Menu......................................................................................................................................................................104
1.2.15 [DU] Menu.......................................................................................................................................................................110
1.2.16 [PCI_Box] Menu..............................................................................................................................................................113
1.2.17 [OPL] Window.................................................................................................................................................................118
1.2.18 [MMB] Menu....................................................................................................................................................................119
1.2.19 [Disk Enclosure] Menu....................................................................................................................................................122
1.3 [Partition] Menu for PRIMEQUEST 2400E/2800E.................................................................................................................126
1.3.1 [Power Control] Window......................................................................................................................................................126
1.3.2 [Schedule] Menu..................................................................................................................................................................132
1.3.3 [Console Redirection Setup] window..................................................................................................................................139
1.3.4 [Partition Configuration] Menu.............................................................................................................................................143

Preface
1.3.5 [Reserved SB Configuration] window.................................................................................................................................150
1.3.6 [Power Management Setup] Window.................................................................................................................................152
1.3.7 [Partition#x] Menu................................................................................................................................................................154
1.4 [User Administration] Menu......................................................................................................................................................163
1.4.1 [User List] window................................................................................................................................................................163
1.4.2 [Change Password] window ...............................................................................................................................................167
1.4.3 [Who] window.......................................................................................................................................................................169
1.5 [Network Configuration] Menu .................................................................................................................................................171
1.5.1 [Date/Time] window.............................................................................................................................................................171
1.5.2 [Network Interface] window................................................................................................................................................. 174
1.5.3 [Management LAN Port Configuration] window.................................................................................................................184
1.5.4 [Network Protocols] window................................................................................................................................................188
1.5.5 [Refresh Rate] window ........................................................................................................................................................190
1.5.6 [SNMP Configuration] window............................................................................................................................................191
1.5.7 [SSL] menu ..........................................................................................................................................................................197
1.5.8 [SSH] menu..........................................................................................................................................................................203
1.5.9 [Remote Server Management] window..............................................................................................................................205
1.5.10 [Access Control] window ................................................................................................................................................208
1.5.11 [Alarm E-Mail] window....................................................................................................................................................212
1.6 [Maintenance] Menu.................................................................................................................................................................217
1.6.1 [Firmware Update] menu.....................................................................................................................................................217
1.6.2 [Backup/Restore Configuration] menu................................................................................................................................218
1.6.3 [Maintenance Wizard] window............................................................................................................................................224
1.6.4 [REMCS] menu....................................................................................................................................................................224
1.7 [System] Menu for PRIMEQUEST 2800B..............................................................................................................................225
1.7.1 [System Status] window......................................................................................................................................................225
1.7.2 [System Event Log] Window...............................................................................................................................................226
1.7.3 [Operation Log] Window......................................................................................................................................................231
1.7.4 [System Information] Window............................................................................................................................................. 231
1.7.5 [Firmware Information] Window..........................................................................................................................................233
1.7.6 [System Setup]Window......................................................................................................................................................235
1.7.7 [Power Control] Window......................................................................................................................................................238
1.7.8 [Schedule] Menu..................................................................................................................................................................241
1.7.9 [Console Redirection Setup] Menu.....................................................................................................................................247
1.7.10 [Power Management Setup] Window............................................................................................................................250
1.7.11 [ASR Control]Window....................................................................................................................................................251
1.7.12 [Console Redirection] Window.......................................................................................................................................253
1.7.13 [Mode] Window...............................................................................................................................................................254
1.7.14 [SB] Menu........................................................................................................................................................................256
1.7.15 [IOU] Menu......................................................................................................................................................................265
1.7.16 [DU] Menu.......................................................................................................................................................................268
1.7.17 [OPL] Window.................................................................................................................................................................269
1.7.18 [MMB] Window................................................................................................................................................................269
CHAPTER 2 MMB CLI (Command Line Interface) Operations.........................................................................................................272
2.1 Basic Operations with the CLI.................................................................................................................................................. 272

Preface
2.1.1 Access to the CLI via the serial interface............................................................................................................................272
2.1.2 Access via the management LAN interface.......................................................................................................................272
2.1.3 CLI command list.................................................................................................................................................................273
2.2 Setting Commands...................................................................................................................................................................285
2.2.1 add partition.......................................................................................................................................................................... 285
2.2.2 clear access_control............................................................................................................................................................ 286
2.2.3 clear ssh_key.......................................................................................................................................................................287
2.2.4 console.................................................................................................................................................................................287
2.2.5 download ssh_key...............................................................................................................................................................288
2.2.6 poweroff...............................................................................................................................................................................289
2.2.7 poweron...............................................................................................................................................................................290
2.2.8 sadump.................................................................................................................................................................................291
2.2.9 reset......................................................................................................................................................................................292
2.2.10 nmi...................................................................................................................................................................................293
2.2.11 remove partition...............................................................................................................................................................294
2.2.12 set active_mmb...............................................................................................................................................................294
2.2.13 set date............................................................................................................................................................................295
2.2.14 set partition dynamic_reconfiguration.............................................................................................................................296
2.2.15 set gateway.....................................................................................................................................................................296
2.2.16 set gateway_ipv6............................................................................................................................................................297
2.2.17 set hostname...................................................................................................................................................................298
2.2.18 set http.............................................................................................................................................................................298
2.2.19 set http_port.....................................................................................................................................................................299
2.2.20 set https ...........................................................................................................................................................................299
2.2.21 set https_port...................................................................................................................................................................300
2.2.22 set ip.................................................................................................................................................................................300
2.2.23 set ipv6.............................................................................................................................................................................301
2.2.24 set maintenance_ip.........................................................................................................................................................302
2.2.25 set partition home............................................................................................................................................................303
2.2.26 set partition lan_device_mode........................................................................................................................................303
2.2.27 set partition memory_mirror_ras_mode.........................................................................................................................304
2.2.28 set partition memory_opration_mode............................................................................................................................ 305
2.2.29 set partition name............................................................................................................................................................307
2.2.30 set partition pci_address_mode .....................................................................................................................................308
2.2.31 set ssh..............................................................................................................................................................................308
2.2.32 set ssh_port.....................................................................................................................................................................309
2.2.33 set telnet .......................................................................................................................................................................... 309
2.2.34set telnet_port..................................................................................................................................................................310
2.2.35 set timezone....................................................................................................................................................................310
2.2.36 hotadd partition................................................................................................................................................................ 311
2.2.37 hotremove partition .........................................................................................................................................................312
2.2.38 pciinfo partition.................................................................................................................................................................314
2.3 Commands for Display.............................................................................................................................................................314
2.3.1 show access_control...........................................................................................................................................................315
2.3.2 show active_mmb................................................................................................................................................................316

Preface
2.3.3 show date.............................................................................................................................................................................316
2.3.4 show exit_code....................................................................................................................................................................316
2.3.5 show partition configuration.................................................................................................................................................317
2.3.6 show partition dynamic_reconfiguration .............................................................................................................................318
2.3.7 show partition home.............................................................................................................................................................319
2.3.8 show partition lan_device_mode.........................................................................................................................................319
2.3.9 show partition name.............................................................................................................................................................320
2.3.10 show partition memory_mirror_ras_mode.....................................................................................................................320
2.3.11 show partition memory_operation_mode......................................................................................................................321
2.3.12 show partition pci_address_mode .................................................................................................................................322
2.3.13 show timezone................................................................................................................................................................322
2.3.14 show gateway.................................................................................................................................................................323
2.3.15 show gateway_ipv6........................................................................................................................................................323
2.3.16 show http .........................................................................................................................................................................323
2.3.17 show http_port.................................................................................................................................................................324
2.3.18 show https .......................................................................................................................................................................324
2.3.19 show https_port...............................................................................................................................................................325
2.3.20 show ip.............................................................................................................................................................................325
2.3.21 show ipv6.........................................................................................................................................................................325
2.3.22 show hostname...............................................................................................................................................................326
2.3.23 show maintenance_ip.....................................................................................................................................................326
2.3.24 show ssh..........................................................................................................................................................................327
2.3.25 show ssh_port.................................................................................................................................................................327
2.3.26 show telnet ......................................................................................................................................................................327
2.3.27 show telnet_port..............................................................................................................................................................328
2.3.28 show network..................................................................................................................................................................328
2.3.29 show ntpq........................................................................................................................................................................329
2.3.30 who ..................................................................................................................................................................................331
2.3.31 help..................................................................................................................................................................................331
2.3.32 netck traceroute...............................................................................................................................................................338
2.3.33 netck arptbl......................................................................................................................................................................338
2.3.34 netck arping.....................................................................................................................................................................339
2.3.35 netck ifconfig....................................................................................................................................................................340
2.3.36 netck stat..........................................................................................................................................................................340
2.3.37 show dynamic_reconfiguration status............................................................................................................................341
2.4 Update Command....................................................................................................................................................................342
2.4.1 Update ALL..........................................................................................................................................................................342
2.4.2 show update_status............................................................................................................................................................. 343
2.5 Other Commands.....................................................................................................................................................................344
2.5.1 exit.........................................................................................................................................................................................344
2.5.2 passwd.................................................................................................................................................................................345
2.5.3 ping....................................................................................................................................................................................... 345
2.6 PRIMEQUEST2800B model Commands..............................................................................................................................347
2.6.1 PRIMEQUEST2800B model CLI command list................................................................................................................347
2.6.2 poweroff...............................................................................................................................................................................351

Preface
2.6.3 poweron...............................................................................................................................................................................352
2.6.4 reset......................................................................................................................................................................................352
2.6.5 nmi........................................................................................................................................................................................353
2.6.6 set memory_opration_mode...............................................................................................................................................353
2.6.7 set memory_mirror_ras_mode ...........................................................................................................................................354
2.6.8 set lan_device_mode...........................................................................................................................................................355
2.6.9 show memory_operation_mode.........................................................................................................................................356
2.6.10 show memory_mirror_ras_mode...................................................................................................................................357
2.6.11 show lan_device_mode..................................................................................................................................................358
2.6.12 set mmbcontrol reset ......................................................................................................................................................358
2.6.13 add user...........................................................................................................................................................................359
2.6.14 show user_list..................................................................................................................................................................359
2.6.15 console ............................................................................................................................................................................360
CHAPTER 3 UEFI Menu Operations...................................................................................................................................................362
3.1 Front page of Boot Manager....................................................................................................................................................362
3.1.1 Window area........................................................................................................................................................................362
3.2 [Continue] Menu ....................................................................................................................................................................... 364
3.3 [Boot Manager] Menu...............................................................................................................................................................364
3.3.1 Boot Option..........................................................................................................................................................................364
3.3.2 Boot specification of UEFI...................................................................................................................................................365
3.3.3 About boot specification of legacy BIOS.............................................................................................................................366
3.3.4 Boot processing...................................................................................................................................................................367
3.4 [Device Manager] Menu...........................................................................................................................................................371
3.4.1 [System Information] Menu.................................................................................................................................................372
3.4.2 [LAN Remote Boot Configuration] Menu............................................................................................................................373
3.4.3 [CPU Configuration] Menu..................................................................................................................................................378
3.4.4 [PCI Subsystem Configuration] Menu................................................................................................................................382
3.4.5 [iSCSI Configuration] menu.................................................................................................................................................394
3.4.6 [Memory Configuration] menu.............................................................................................................................................406
3.4.7 [USB Configuration] menu...................................................................................................................................................409
3.4.8 [Security Configuration] menu.............................................................................................................................................411
3.5 [Boot maintenance Manager] Menu........................................................................................................................................413
3.5.1 [Boot Mode] Menu...............................................................................................................................................................414
3.5.2 [Boot Options] menu............................................................................................................................................................415
3.5.3 [Boot From File] Menu.........................................................................................................................................................444
3.5.4 [Boot From DVD/CD] Menu................................................................................................................................................447
3.5.5 [Set Boot Delay Time] Menu...............................................................................................................................................447
3.6 Device Path...............................................................................................................................................................................450
3.6.1 Parameterof Device Path...................................................................................................................................................450
3.6.2 Identification of Device Path................................................................................................................................................451
CHAPTER 4 UEFI Command Operations ..........................................................................................................................................454
4.1 Automatic startup file.................................................................................................................................................................454
4.1.1 Automatic startup file............................................................................................................................................................ 454
4.1.2 UEFI shell command syntax...............................................................................................................................................455
4.1.3 Output redirection.................................................................................................................................................................455

Preface
4.1.4 UEFI shell command list......................................................................................................................................................456
CHAPTER 5 Dynamic Reconfiguration Operation..............................................................................................................................457
5.1 DR Command...........................................................................................................................................................................457
5.1.1 dr command (common part)...............................................................................................................................................457
5.1.2 Device hot-add/hot-remove operation (add/rm subcommand).........................................................................................457
5.1.3 Show slot status (slot subcommand)..................................................................................................................................458
5.1.4 Show resources on device (show subcommand)..............................................................................................................459
5.1.5 Information gathering (dr report subcommand)..................................................................................................................459
5.2 Hot plug collaboration function................................................................................................................................................. 460
5.2.1 Description of collaboration function ...................................................................................................................................460
5.2.2 Collaboration program execution timing.............................................................................................................................460
5.2.3 Timeout of collaboration program.......................................................................................................................................461
5.2.4 Directory that stored collaboration program........................................................................................................................461
5.2.5 Naming convention of collaboration program.....................................................................................................................461
5.2.6 Method of describing configuration file of collaboration program ......................................................................................462
5.2.7 Permission required for collaboration program..................................................................................................................463
5.2.8 Argument passed to collaboration program.......................................................................................................................463
5.2.9 Exit status of collaboration program....................................................................................................................................465
5.2.10 Output of collaboration program.....................................................................................................................................465
5.2.11 Flow of collaboration program execution.......................................................................................................................465
CHAPTER 6 Setting of sadump environment .....................................................................................................................................470
6.1 Sadump Configuration Menu...................................................................................................................................................470
6.1.1 Screen areas........................................................................................................................................................................474
6.2 Main menu................................................................................................................................................................................474
6.3 [Set up Manager] Menu............................................................................................................................................................475
6.4 [Dump device Manager] Menu ................................................................................................................................................477
6.5 [Create a dump device] Menu..................................................................................................................................................478
6.6 [Select device] Menu ................................................................................................................................................................479
6.7 [Setting dump device] Menu..................................................................................................................................................... 481
6.8 [Select device] Menu ................................................................................................................................................................482
6.9 [Select discard dump device] Menu......................................................................................................................................... 483
6.10 [Select multiple devices] Menu................................................................................................................................................. 484
Appendix A List of Setting Items..................................................................................................................................................................487
A.1 Setting Items of MMB Web-UI.................................................................................................................................................487
A.1.1 Setting items of [System Event Log Filtering Condition] Window................................................................................487
A.1.2 Setting Item of [Operation Log Filtering Condition] Window........................................................................................488
A.1.3 Setting Items of [System Information]Window..............................................................................................................489
A.1.4 Setting items of [System Setup] Window.......................................................................................................................489
A.1.5 Setting items of [System Power Control] Window.........................................................................................................490
A.1.6 Setting items of [Power Control] Window......................................................................................................................490
A.1.7 Setting Items of [Schedule Control] Window.................................................................................................................491
A.1.8 Setting Items of [Add Schedule]/ [Edit User] Window...................................................................................................491
A.1.9 Setting Items of [Partition Configuration]Window.........................................................................................................491
A.1.10 Setting Items of [IPv4 Console Redirection Setup] Window.........................................................................................492
A.1.11 Setting Items of [IPv6 Console Redirection Setup] Window.........................................................................................492

Preface
A.1.12 Setting Items of [Power Management Setup] Window.................................................................................................492
A.1.13 Setting Items of [ASR Control] Window.........................................................................................................................493
A.1.14 Setting Items of [Console Redirection] Window............................................................................................................ 493
A.1.15 Setting Items of [Mode] Window....................................................................................................................................494
A.1.16 Setting Items of [Add User]/ [Edit User]Window...........................................................................................................494
A.1.17 Setting Items of [Date/Time]Window.............................................................................................................................495
A.1.18 Setting Items of [IPv4 Interface] Window.......................................................................................................................496
A.1.19 Setting Items of [IPv6 Interface]Window.......................................................................................................................497
A.1.20 Setting Items of [Management LAN Port Configuration] Window................................................................................498
A.1.21 Setting Items of [Network Protocols] Window................................................................................................................499
A.1.22 Setting Items of [Refresh Rate] Window........................................................................................................................499
A.1.23 Setting Items of [SNMP Community]Window...............................................................................................................500
A.1.24 Setting Items of [SNMP Trap] Window..........................................................................................................................500
A.1.25 Setting Items of [SNMP v3 Configuration]Window.......................................................................................................501
A.1.26 Setting Items of [Create CSR] Window..........................................................................................................................502
A.1.27 Setting Items of [Create Selfsigned Certificate] Window...............................................................................................502
A.1.28 Setting Items of [Edit User] Window...............................................................................................................................503
A.1.29 Setting Items of [Add Filter] / [Edit Filter] Window.......................................................................................................... 503
A.1.30 Setting Items of [Alarm E-Mail]Window.........................................................................................................................504
A.1.31 Setting Items of [Alarm E-Mail Filtering Condition] Window..........................................................................................504
A.2 Setting Items on UEFI ..............................................................................................................................................................504
A.2.1 Setting Items on [LAN Remote Boot Configuration] Window.......................................................................................505
A.2.2 Setting Items on [CPU Configuration]Window .............................................................................................................505
A.2.3 Setting Items on [PCI Subsystem Configuration] Window............................................................................................506
A.2.4 Setting Items on [iSCS Configuration] Window.............................................................................................................509
A.2.5 Setting Items on [Memory Configuration] Window........................................................................................................511
A.2.6 Setting Items on [USB Configuration] Window..............................................................................................................511
A.2.7 Setting Items on [Security Configuration] Window........................................................................................................511
A.3 Setting Items on Video redirection...........................................................................................................................................512
A.3.1 Setting Items on [Video] Window...................................................................................................................................512
A.3.2 Setting Items on [Keyboard]Window.............................................................................................................................512
A.3.3 Setting Items on [Mouse]Window.................................................................................................................................513
A.3.4 Setting Items on [Options]Window................................................................................................................................513