Fujitsu PRIMERGY ECONEL30 User manual

PRIMERGY Econel30
System configurator and order-information guide
Contents
Instructions
Configuration diagram
Configurator
0System software
IBasic unit
II Processor
III Memory
IV Graphics
VAccessible drives
VI Hard disk drives
VII SCSI Controller
VIII Disk array
IX Communikation/Network
XMiscellaneous
XI Country specific power cord
Change report
PRIMERGY Server
November 2003

System configurator and order-information guide
PRIMERGY Econel30 Status 2003-10-28
Instructions
This document contains basic product and configuration information that will enable you to configure your system via
PC-/ System-Architect.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
Section III Memory, example
There are X memory slots which can be equipped with XXX MB.
It is permissible to make up to X passes through the memory upgrade options.
S26361-XXX-XXX S26361-XXX-XXX
Memory XXX MB Memory XXX MB
X times
max. X times per system max. X times per system
In one chapter you can only select as many components (here 4x) as the arrow indicates.
4x
Please note that there are information symbols which indicate necessary information.
Further information in the internet see:
http://www.primergy.com
(internet)
http://extranet.fujitsu-siemens.com/primergy
(extranet)
Prices and availability see price list and PC-/ System-Architect.
Subject to change and errors excepted.
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 2 of 11

System configurator and order-information guide
PRIMERGY Econel30 Status 2003-10-28
Configuration diagram for "PRIMERGY Econel30" system unit
SIDE VIEW
FRONT VIEW
System unit ( I )
Pentium 4 / Celeron
Standard
Power supply
Processor ( II ) Memory ( III ) 5.25"x1.6" DVD
Extension slots
5.25"x1.6"
Graphics ( IV )
SCSI Controller ( VII )
Disk array
Communication/Network ( IX )
5.25"x1.6"
Miscellaneous ( X )
3.5"x1" Floppy disk
AGP short
Accessible drives (V)
PCI 32-Bit / 33MHz, long Hard disks ( VI )
PCI 32-Bit / 33MHz, long IDE/SCSI - 3.5"x1"
PCI 32-Bit / 33MHz, long IDE/SCSI - 3.5"x1"
PCI 32-Bit / 33MHz, long
IDE/SCSI - 3.5"x1"
PCI 32-Bit / 33MHz, long IDE/SCSI - 3.5"x1"
PCI 32-Bit / 33MHz, long
Recommendation of HD extension
Number of HDs
4
No 1
No 2
No 3 1)*
No 4 1)*
onb. = onboard MA = Master
Ch = Channel SL = Slave
All needed cables are enclosed.
Depending on the number and type of HDs, the chart above shows the connection of HDs
to the on-board IDE Controller, to the IDE RAID cards and to the SCSI controller card respectively.
1) * A second RAID Controller can only later be ordered as -L part number.
onb. MA
1.RAID MA Ch2 ID 1 (opt.)
2.RAID MA Ch1 ID 2 (opt.)
onb. MA onb. MA RAID MA Ch1
- -
- - -
MIXED
IDE MIXED IDE
Standard
IDE
onb. MA
Standard
IDE or
RAID
IDE
RAID MA Ch1 RAID MA Ch1
HD-Bays
-
-onb. SL RAID MA Ch2 -onb. SL
RAID MA Ch2 RAID MA Ch2 2.RAID MA Ch2 ID 3 (opt.)
1 2 1-43
Bank 1 Bank 2
2
1
4
3
PCI-Bus
1
2
3
4
6
5
or
RAID
IDE SCSI
1.RAID MA Ch1 ID 0 (std.)
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 3 of 11

System configurator and order-information guide
Start "PRIMERGY Econel30"
PRIMERGY Econel30 Status 2003-10-28
SW Configurator
mit OEM-Software ohne OEM-Software
für PRIMERGY-Server für PRIMERGY-Server
Bis auf OEM-SW von Vmware und F5 ist die Verwendung
von OEM-Betriebssystem- Software später nicht mehr erlaubt.
For all SW products listed below please refer to the corresponding software configurator accessible
via the Extranet under "PC Configurations, Configurator for PRIMERGY SW", URL see below.
MS - Software: W **) PRIMECLUSTER *)
- NT 4.0 Server - Clustering
- Small Business Server 2000 - Load Balancing
- Windows 2000 Server
- Windows Server 2003,
Web Edition (only English) Linux - Software: **)
Standard Edition - SuSE Linux Enterprise Server: S
- SuSE Professional Linux
- Red Hat Enterprise Linux
- Red Hat Professional Linux
CITRIX-Software for NT: W1
- Multiuser SW MetaFrame
LoadBalancing
Additional User Licences
easyMirror for Linux *) Pay attention to release information on datasheet under
NT 4, WIN 2000 ****)
http://www.primecluster.com
**) Pay attention to release and order information in PRINCE -> Operating System
http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm
Backup-Software: U
- ARCserve for NT
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users:
http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm
for partners:
http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm
Continue with PRIMERGY
HW configurator
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 4 of 11

System configurator and order-information guide
Start "Econel30"
PRIMERGY Econel30 Status 2003-10-28
Section IBasic unit
System unit consisting of:
* Housing including power supply
* Systemboard with
- Ultra DMA-100 Controller on-board (for 2x 2 drives)
- 7 slots:1x AGP, 6x PCI
* 1 drive bay 3.5" (occupied by 1 floppy disk 3.5"/ 1.44MB)
* 3 bays 5.25" for accessible drives (one is occupied by 1 DVD)
* 4 bays for IDE/SCSI HDs (internal)
* Audio on-board
* AGP-graphics card ATI Rage128 (16MB) in AGP slot
* LAN (Intel) on-board
* all cables included
* PS/2 wheelmouse
S26361-K831-V360
IDE Grundeinheit V360
- Celeron Prozessor 2.6GHz
128KB SLC, inkl. Kühlkörper
- 256MB DDR-RAM PC2100
- 1x 40 GB IDE HD
S26361-K831-V310 S26361-K831-V320 S26361-K831-V340 S26361-K831-V350
IDE Basic unit V310 IDE Basic unit V320 IDE Basic unit V340 IDE Basic unit V350
- Pentium 4 processor 2.4GHz - Pentium 4 processor 2.4GHz - Pentium 4 processor 2.4GHz - Pentium 4 processor 2.4GHz
512KB SLC, incl. heat sink 512KB SLC, incl. heat sink 512KB SLC, incl. heat sink 512KB SLC, incl. heat sink
- 256MB DDR-RAM PC2100 - 256MB DDR-RAM PC2100 - 512MB DDR-RAM PC2100 - 512MB DDR-RAM PC2100
- 1x 40 GB IDE HD - 1x 80 GB IDE HD - 1x 80 GB IDE HD - 1x 120 GB IDE HD
S26361-K831-V311 S26361-K831-V321 S26361-K831-V331 S26361-K831-V341
SCSI Basic unit V311 SCSI Basic unit V321 SCSI Basic unit V331 SCSI Basic unit V341
- Pentium 4 processor 2.4GHz - Pentium 4 processor 2.4GHz - Pentium 4 processor 2.4GHz - Pentium 4 processor 2.4GHz
512KB SLC, incl. heat sink 512KB SLC, incl. heat sink 512KB SLC, incl. heat sink 512KB SLC, incl. heat sink
- SCSI Controller (D1305) - SCSI Controller (D1305) - SCSI Controller (D1305) - SCSI Controller (D1305)
- 256MB DDR-RAM PC2100 - 256MB DDR-RAM PC2100 - 512MB DDR-RAM PC2100 - 512MB DDR-RAM PC2100
- 1x 36GB SCSI HD - 1x 73GB SCSI HD - 1x 36GB SCSI HD - 1x 73GB SCSI HD
A
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 5 of 11

System configurator and order-information guide
A
PRIMERGY Econel30 Status 2003-10-28
Section II Processor
Included in the basic unit!
Section III Memory
There are 2 memory slots. They can be equiped with 256MB, 512MB, 1GB.
Mix and match is possible. One memory slot is occupied!
S26361-F2580-E256 S26361-F2580-E512 S26361-F2580-E513
Memory 256MB DDR-RAM PC2100 Memory 512MB DDR-RAM PC2100 Memory 1GB DDR-RAM PC2100
ECC unbuffered ECC unbuffered ECC unbuffered
consisting of one module consisting of one module consisting of one module
occupies one slot occupies one slot occupies one slot
max. 1xper system max. 1xper system max. 1xper system
Section IV Graphics
Graphics Controller ATI Rage128 16MB is included in
the basic unit (occupies AGP slot). Other graphic
cards only possible by PCI bus in Customizing.
B
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 6 of 11

System configurator and order-information guide
B
PRIMERGY Econel30 Status 2003-10-28
Section VRemovable Media Drives
There is 1 drive bay 3.5" occupied by 1 floppy disk 3.5"/ 1.44MB and
3x 5.25" bays for accessible drives.
S26361-F3008-E1
CD-RW / DVD drive
1x 48/24/48/16 IDE
only W2K and Linux
1.6 * 5.25", anthracite bezel
max. 1x per system
S26361-F2238-E3
Tape drive SLR 100
50GB, 5MB/s, U2W SCSI
Connector: HD68
without cable
incl. description (Ger/US)
data and cleaning cartridge
1.6 * 5.25", anthracite bezel
max. 1x per system
1x
S26361-F2233-E3 S26361-F2848-E3 S26361-F2849-E3
Tape drive DAT DDS4 Tape drive DDS Gen5 Tape drive VXA-2
S26361-F2233-E31 (only for OBDR) 36GB, 3MB/s, U2W SCSI 80GB, 6MB/s, U2W SCSI
DDS4 for One buttom dis. Recovery Connector: HD68 Connector: HD68
20GB, 2.8MB/s, U2W SCSI without cable without cable
Connector: HD68 incl. description (Ger/US) incl. description (Ger/US)
without cable data and cleaning cartridge data and cleaning cartridge
incl. description (Ger/US) 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel
1.6 * 5.25", anthracite bezel max. 1x per system max. 1x per system
max. 1x per system
Section VI Hard disk drives
One hard disk drive is in the basic unit included
A. Hard Disks for IDE Basic Units
S26361-F2263-E40 S26361-F2263-E80 S26361-F2263-E120
Hard disk 40GB DMA 100 Hard disk 80GB DMA 100 Hard disk 120GB DMA 100
3x fitting height 1" fitting height 1" fitting height 1"
occupies 3.5" drive bay occupies 3.5" drive bay occupies 3.5" drive bay
max. 3x per system max. 3x per system max. 3x per system
If you install more than 2 IDE Hard Disks, an IDE-RAID Controller (S26361-F2567-E2) is needed.
At a RAID controller only drive assemblies with same capacity may be attached.
B. Hard Disks for SCSI Basic Units
S26361-F2824-E136 S26361-F2824-E173
Hard disk 36GB U 160 SCSI Hard disk 73GB U 160 SCSI
3x fitting height 1" fitting height 1"
occupies 3.5" drive bay occupies 3.5" drive bay
max. 3x per system max. 3x per system
C
SCSI Basic Unit or
SCSI Controller are
needed for Backup
Drives.
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 7 of 11

System configurator and order-information guide
C
PRIMERGY Econel30 Status 2003-10-28
Section VII SCSI Controller
There are 7 slots (max. 340 mm): 1x AGP (ocuppied by AGP graphics card), 6x PCI long
A. SCSI Controller for backup drives
S26361-F2644-E3
SCSI Controller UW SCSI Controllers only for backup drives
with LSI Chip 53C1000R In SCSI Basic Units not necessary
1 channel LVD,
for internal backup drive
max. 160MB/s; with cable
64/66 PCI, min 166mm,
PCI standard profile
int: HD68 LVD, ext:
SW:
max. 1x per system
B. SCSI Controller for external peripheral devices
S26361-F2399-E1
SCSI 160 Controller
Adaptec SCSI Card 29160
1 channel: LVD + Fast/ Ultra (decoupl.)
LVD connect. for HD, without cable
Fast/Ultra connect. for acc. drives
64/66 (32/33) PCI, min 180 mm, hp
int: Fast 50 pins or Ultra HD68
+ LVD HD68; ext: HD68(LVD)
SW:
max. 1 per system
Section VIII Disk array
S26361-F2567-E2 In RAID-modus you need 2 IDE RAID Controller for the connection
IDE RAID Controller of 4 hard disk drives!
Promise Fasttrak 100 LP
2-channel IDE RAID Controller
max. 100MB/s, with cable A second IDE RAID Controller can only later be ordered as -L part number.
1 HD per channel max. It may be mounted only after installation of the operating system.
32/66 PCI, min. 180mm
int.: 2 x ATA 100 UDMA
ext.:
SW:
max. 1x per system
D
IDE RAID Controller are only released for
IDE Basic Units!
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 8 of 11

System configurator and order-information guide
D
PRIMERGY Econel30 Status 2003-10-28
Section IX Communication / Network
S26361-F2643-E1
Fast Ether. Contr. 10/100TX
Intel Pro 100 Server Adapter
AFT under NT, W2k also with
on-board LAN, WOL, load bal.
32/33 Bit PCI, min 120 mm
ext: for RJ45-connector
SW: VLAN, Fast Etherchannel
max. 1x per system
freigegeben.
2x
S26361-F2730-E1 S26361-F2732-E1 S26361-F2839-E1
Gigabit Ethernet Contr. 1000TX Gigabit Ethernet Contr. 1000SX Gigabit Ethernet Contr. 1000TX
Intel Pro/1000 XT Server Adapter Intel Pro/1000 XF Server Adapter Intel Pro/1000 MT Adapter
Adapter Teaming Support Adapter Teaming Support PCI 32 (33/66MHz), min 122 mm
PCI-X (PCI64/66), min 163 mm PCI-X (PCI64/66), min 163 mm ext: for RJ45-plug, Cat 5
ext: for RJ45-connector, Cat 5 ext: for Duplex SC-connector connection with Cat 5 cabling
connection with Cat 5 cabling SW: VLAN, Fast Etherchannel
SW: VLAN, Fast Etherchannel SW: VLAN, Fast Etherchannel max. 2x per system
max. 2x per system max. 2x per system
E
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 9 of 11

System configurator and order-information guide
E
PRIMERGY Econel30 Status 2003-10-28
Section XMiscellaneous
Section XI Country pack
Power cord for floorstand versions for following countries:
1,8 m, grey
T26139-Y1740-E10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR
T26139-Y1742-E10 USA, Canada
T26139-Y1743-E10 Switzerland
T26139-Y1744-E10 UK, IR
T26139-Y1745-E10 Italy
T26139-Y1746-E10 Denmark
T26139-Y3850-E10 Option "no powercord"
Keyboards for following countries:
S26381-K397-E110 USA / international
S26381-K397-E120 Germany
S26381-K397-E140 France
S26381-K397-E155 Sweden / Finland
S26381-K397-E165 United Kingdom
S26381-K397-E180 Spain
S26381-K397-E185 Italy
Other options and Peripherals
For other options refer to the section "Product-specific options
These options are supplied loose with the shipment.
For suitable peripherals for this product refer to the section "Peripherals/communication"
End PRIMERGY Econel30
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 10 of 11