Fujitsu PRIMERGY TX2560 M1 User manual

Operating Manual - English
FUJITSU Server
PRIMERGY TX2560 M1 / RX2560 M1
Operating Manual
Edition March 2015

Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected].
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2015 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any without the prior written permission of
Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.

TX2560 M1 / RX2560 M1 Operating Manual
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured to be used in commercial
and/or industrial areas as a server.
When used as visual display workplace, it must not be placed in the direct field
of view to avoid incommoding reflections (applies only to TX server systems).
The device has not been designed or manufactured for uses which demand an
extremely high level of safety and carry a direct and serious risk of life or body
if such safety cannot be assured.

Operating Manual TX2560 M1 / RX2560 M1
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market:
About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://jp.fujitsu.com/platform/server/primergy/harddisk/

TX2560 M1 / RX2560 M1 Operating Manual
Only for the Japanese market:
IAlthough described in this manual, some sections do not apply to the
Japanese market. These options include:
– CSS (Customer Self Service)

Operating Manual TX2560 M1 / RX2560 M1

TX2560 M1 / RX2560 M1 Operating Manual
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.1 Concept and target groups for this manual . . . . . . . . . 12
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 12
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 13
2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 15
2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.2 Server specification . . . . . . . . . . . . . . . . . . . . . . 25
3 Installation steps, overview . . . . . . . . . . . . . . . . . . 35
4 Important information . . . . . . . . . . . . . . . . . . . . . 37
4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 37
4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 45
4.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 46
4.4 Transporting the server . . . . . . . . . . . . . . . . . . . . 47
4.5 Notes on installing the server in the rack . . . . . . . . . . . 48
4.6 Environmental protection . . . . . . . . . . . . . . . . . . . 49
5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 51
5.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . 52
5.2 Setting up the floorstand model . . . . . . . . . . . . . . . . 53
5.3 Installing/removing the rack model . . . . . . . . . . . . . . 54
5.4 Connecting devices to the server . . . . . . . . . . . . . . . 56
5.5 Connecting the server to the mains . . . . . . . . . . . . . . 58
5.5.1 Using the cable clamp . . . . . . . . . . . . . . . . . . . . . . 59

Operating Manual TX2560 M1 / RX2560 M1
Contents
5.6 Notes on connecting/disconnecting cables . . . . . . . . . . 60
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 63
6.1 Access to the drives (floorstand model) . . . . . . . . . . . . 63
6.1.1 Enabling access to the accessible drives . . . . . . . . . . . . . 63
6.1.2 Access to the HDD modules (floorstand model) . . . . . . . . . 64
6.2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 65
6.2.1 Front of server . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.2.1.1 Control elements . . . . . . . . . . . . . . . . . . . . . . . 66
6.2.1.2 Indicators on the control panel . . . . . . . . . . . . . . . . 67
6.2.1.3 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
6.2.1.4 Indicators on the drives . . . . . . . . . . . . . . . . . . . . 70
6.2.2 Rear of server . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
6.3 Switching the server on and off . . . . . . . . . . . . . . . . 76
6.4 Configuring the server . . . . . . . . . . . . . . . . . . . . . 80
6.4.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 80
6.4.2 Configuring the SAS/SATA RAID controller
(PCIe expansion card) . . . . . . . . . . . . . . . . . . . . . . 81
6.4.3 Configuring the server and installing the operating system
with the ServerView Installation Manager . . . . . . . . . . . . . 82
6.4.4 Configuring the server and installing the operating system
without the ServerView Installation Manager . . . . . . . . . . . 83
6.5 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 84
7 Property and data protection . . . . . . . . . . . . . . . . . . 85
7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 85
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 87
8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 87
8.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 88
8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 88
8.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 89
8.5 No screen display or display drifts . . . . . . . . . . . . . . . 89

TX2560 M1 / RX2560 M1 Operating Manual
Contents
8.6 No mouse pointer displayed on screen . . . . . . . . . . . . 89
8.7 System will not boot . . . . . . . . . . . . . . . . . . . . . . 90
8.8 Incorrect date and time . . . . . . . . . . . . . . . . . . . . 90
8.9 Hard disk drive error messages at system boot . . . . . . . 90
8.10 Added drive reported as defective . . . . . . . . . . . . . . 91
8.11 Error message on screen . . . . . . . . . . . . . . . . . . . 91
8.12 Expansion cards or onboard devices not recognized . . . . 92
8.13 Temperature warning . . . . . . . . . . . . . . . . . . . . . . 92
8.14 No effect of keyboard or mouse . . . . . . . . . . . . . . . . 92
8.15 Optical drive cannot read data . . . . . . . . . . . . . . . . 93

Operating Manual TX2560 M1 / RX2560 M1
Contents