Fujitsu MAN3184 SERIES User manual

C141-E123-01EN
MAN3184, MAN3367, MAN3735 SERIES
DISK DRIVES
SCSI PHYSICAL INTERFACE SPECIFICATIONS

This Product is designed, developed and manufactured as contemplated for general use, including
without limitation, general office use, personal use and household use, but is not designed,
developed and manufactured as contemplated for use accompanying fatal risks or dangers that,
unless extremely high safety is secured, could lead directly to death, personal injury, severe
physical damage or other loss (hereinafter “High Safety Required Use”), including without
limitation, nuclear power core control, airplane control, air traffic control, mass transport operation
control, life support, weapon launching control. You shall not use this Product without securing the
sufficient safety required for the High Safety Required Use. If you wish to use this Product for
High Safety Required Use, please consult with our sale person in charge before such use
The contents of this manual is subject to change without prior notice.
All Rights Reserved. Copyright 2001 FUJITSU LIMITED

C141-E123-01EN i
FOR SAFE OPERATION
Handling of This manual
This manual contains important information for using this product. Read thoroughly before using
the product. Use this product only after thoroughly reading and understanding especially the
section “Important Alert Items” in this manual. Keep this manual handy, and keep it carefully.
FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering
damage to their property. Use the product according to this manual.
Functional Limitations
There may be certain functional limitations concerning the specifications and functions of the
products covered by this manual depending on the equipment version, especially concerning the
following functions.
Versions in which there functions can be used will be communicated through “ENGINEERING
CHANGE REQUEST/NOTICE”, issued by Fujitsu.
Function Equipment Version Which Supports These Functions
Equipment
Version No. EPROM Version No. Standard INQUIRY Data Product Revision (ASCII)
WRITE RAM Command These commands cannot be used in the current version.
READ RAM Command
(Proceed to the Copyright Page)

C141-E123-01ENii
Related Standards
Specifications and functions of products covered by this manual comply with the following
standards.
Standard (Text) No. Name Enacting Organization
T10/1302D Rev 14
(final) Working Draft American National Standard Information
Technology --- SCSI Parallel Interface 3
American National
Standards Institute
(ANSI)
All Rights Reserved, Copyright 2001 Fujitsu Limited

C141-E123-01EN iii
REVISION RECORD
Edition Date
published Revised contents
01 Mar.,2001
Specification No.: C141-E123-**EN
The contents of this manual is subject to
change without prior notice.
All Rights Reserved.
Copyright 2001
FUJITSU LIMITED

This page is intentionally left blank.

C141-E123-01EN v
PREFACE
This manual explains the MAN3184/MAN3367/MAN3735 series 3-1/2" intelligent disk drives each having
the built-in SCSI controller.
This manual details the specifications and functions of the Small Computer System Interface (SCSI) to
connect the above listed disk drives to the user system. Also, the manual details various SCSI command
specifications and the command processing functions, and provides the information required to creation of
host system software. This manual is intended to be used by the users who have the basic knowledge of
computer system operations.
The following lists the manual configuration and the contents of each chapter. The caution labels and
markings are also explained.
Manual Configuration and Contents
This manual consists of the following three chapters, and the terminologies and abbreviations sections.
Chapter 1 SCSI Bus
This chapter describes the configuration, physical and electrical requirements, interface protocol, and
other operations of the Small Computer System Interface (SCSI) which connects the
MAN3184/MAN3367/MAN3735 series intelligent disk drives to the user system.
Chapter 2 SCSI Messages
This chapter describes the type and explanation of messages defined for SCSI bus operations.
Chapter 3 ERROR Recovery
This chapter describes error recovery processing executed by the MAN3184/MAN3367/MAN3735 series
intelligent disk drives in response to various errors on the SCSI bus.
Glossary
This section explains the terminologies the reader must understand to read this manual.
Abbreviations
This section lists the abbreviated terms and their full words used in this manual.

C141-E123-01ENvi
CONVENTIONS
This manual uses the following conventions:
NOTE: NOTE indicates the information useful for the user to operate the system.
Important information
The important information is provided with the "Important" title. The important information text is
centered so that the reader can distinguish it from other manual texts. The following gives an example:
IMPORTANT
The IDD operates as a target (TARG) on the SCSI bus. The IDD is
called "TARG" in this chapter except when clear identification is
required.
Notations
A decimal value is indicated as it is in this manual.
A hexadecimal value is indicated in the X'17B9' or 17B9h or 17B9H notation.
A binary value is indicated in the notation similar to "010."
The disk drive model name has a different suffix depending on its SCSI electrical characteristics, capacity,
data format used during shipment and others. The following typical model name is used except when the
model needs to be distinguished. Also, the disk unit may be referred to as the "IDD" or "unit" in this
manual.

C141-E123-01EN vii
Note 1: Model name
M AN 3 184 MC
Interface type MP: Low-Voltage Differential, 16-bit SCSI Ultra-160m,
68-pin connector
MC: Low-Voltage Differential, 16-bit SCSI Ultra-160m,
SCA-2 connector
Formatted capacity (100 MB units)
Disk size
Type AN: 1-inch height (10,025 rpm)
Note 2: Typical model name
Type model name Model name
MAN3184 MAN3184MP, MAN3184MC
MAN3367 MAN3367MP, MAN3367MC
MAN3735 MAN3735MP, MAN3735MC
Requesting for User's Comments
Please use the User's Comment Form attached to the end of this manual to identify user comments including
error, inaccurate and misleading information of this manual. Contact to your Fujitsu representative for
additional comment forms if required.

C141-E123-01ENviii
MANUAL ORGANIZATION
Product/
Maintenance Manual • General Description • Specifications
• Data Format
• Installation Requirements
• Installation
• Diagnostics and Maintenance
• Error Analysis
• Principle of Operation
SCSI Physical
Interface
Specifications
• SCSI Bus
• SCSI Message
• Error Recovery
SCSI Logical
Interface
Specifications
• Command Processing
• Data Buffer Management
• Command Specifications
• Parameter Data Formats
• Sense Data and Error Recovery Methods
• Disk Media Management